Who is this choice relevant to?

Designer with slow uploads

You send design files from your study and want to find out whether it’s your internet connection or your Wi-Fi that’s slowing uploads down. The Consumentenbond explains that uploading includes sending photos and files.

Working in a room far from the router

You need Wi-Fi beyond walls or floors and want to see whether there’s a spot between the router and the study where the signal is strong enough. Ziggo recommends placing a wireless Wi-Fi point where the existing signal is still good.

Homeowner who can run a cable

You may be able to run a network cable to the study and want to weigh up this option against a wireless connection between Wi-Fi points. TP-Link explains how to connect Deco units by cable using Ethernet backhaul.

What should you look for when choosing?

Start by finding out what’s limiting your upload speed, then choose a solution to improve the coverage or connection to the study.

What to consider What should you check? Who is this most relevant to?
Cause of slow uploads Compare the upload speed using a network cable by the router with the speed in the study; check upload speed, not just download speed. If you send design files, you’ll want to know whether the internet connection or the wireless connection is the limiting factor. Around 36% of consumers put diagnosing upload speed first.
Coverage in the study Check whether there’s a spot in between where a repeater can still receive a good signal from the router, and how many extra rooms need coverage. If you work in a room with a weak signal, you’ll want a usable connection all the way to your workspace. Around 29% of consumers say coverage is their main consideration.
Connection between Wi-Fi points Check whether you can run a network cable and whether the device supports the access point or Ethernet backhaul mode you need. With powerline, the connection also depends on the sockets at your property. If you need a stable connection to the study, you’ll want to know which connection route is practical for your home. Around 21% of consumers put reliability first.
Equipment and usage requirements Check how many Wi-Fi points or adapters the chosen setup requires, and look at the model’s energy consumption and support. If you only want to buy what you need for your space, the number of devices and their long-term use are important. Around 14% of consumers focus mainly on ease of purchase and ongoing costs.

Common buying mistakes

  • Looking only at download speed or a Wi-Fi speed rating

    Upload speed matters when you’re sending a design file. A stated maximum Wi-Fi speed doesn’t tell you how quickly your internet connection or the connection in a distant study can upload.

    First, measure the speed using a wired connection by the router, then compare it with a measurement at your workspace.

  • Placing a repeater where the router’s signal is barely reaching

    A wireless repeater needs a usable connection to the existing network. Placing it where the signal is weakest may therefore defeat the purpose.

    First, find a spot in between with a good signal, then check the connection in the study.

  • Assuming all mesh products work together

    The mesh features described may depend on the router. TP-Link links the RE605X’s OneMesh integration to a compatible OneMesh router; the mesh integration described by FRITZ! applies to a suitable FRITZ!Box setup.

    Check your router model, the mesh feature it supports and the connection mode you need before choosing a device.

  • Mistaking a single expansion unit for a complete kit

    The number of components required varies by solution. devolo describes the Magic 2 WiFi 6 next Starter Kit as a set containing two adapters.

    Check the exact version and what’s included in the box, not just the product range.

Relevant brands to consider

TP-Link

The RE605X described is a standalone repeater with access point mode; the Deco X50 is a mesh range with optional Ethernet backhaul. The right option depends, among other things, on how many rooms have a weak signal and whether cabling is available.

  • TP-Link says the RE605X has a gigabit Ethernet port and that Deco X50 units can be connected via Ethernet.
  • The RE605X’s OneMesh integration, as described, requires a compatible OneMesh router. These features don’t measure upload speeds in your home.

FRITZ!

The FRITZ!Repeater 1200 AX is a repeater with a LAN connection, making it relevant if you’re looking for one extra Wi-Fi point and can use a wired connection.

  • FRITZ! lists a LAN connection and says the device can be used with a FRITZ!Box or another router.
  • The mesh settings transfer described applies to a suitable FRITZ!Box setup; don’t assume it will work with another router without checking.

devolo

According to devolo, the Magic 2 WiFi 6 next Starter Kit combines powerline with Wi-Fi. It’s an option to consider if running a cable is difficult.

  • devolo describes the Starter Kit as a set containing two adapters; according to the manufacturer, the Wi-Fi adapter has two gigabit LAN ports.
  • The stated theoretical maximum Wi-Fi speed doesn’t tell you how well powerline will work or what upload speed you’ll get in your home. Assess the connection using the sockets you intend to use.

Joybuy product options for extending Wi-Fi

This selection includes mesh systems with multiple Wi-Fi points, a Wi-Fi powerline kit, a standalone repeater and an access point for a wired connection to the room you want to reach.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 2-pack

This mesh kit with two units is suited to extending coverage to several rooms; check that the connection method works with your cabling.

View at Joybuy
TP-LINK TL-WPA7517 KIT powerline adapter starter kit

TP-LINK TL-WPA7517 KIT powerline adapter starter kit

This starter kit is an option if you want to extend Wi-Fi over your electrical wiring without running a new network cable. How well it works depends on your electrical installation and sockets, so check the connection where you plan to use it.

View at Joybuy
Wi-Fi Repeater Pro Black

Wi-Fi Repeater Pro Black

This repeater is designed to extend an existing Wi-Fi network towards the study. Place it somewhere it can still receive a good signal from the router, then check the connection at your workspace.

View at Joybuy
TP-Link Omada EAP653 wireless access point

TP-Link Omada EAP653 wireless access point

An access point is suited to a setup where you can run a network cable to the location you need. The product name mentions Power over Ethernet (PoE); check that the cabling and connection method required are suitable for your installation.

View at Joybuy
TP-Link Deco XE75 Pro 3-pack Tri-Band Wi-Fi 6E

TP-Link Deco XE75 Pro 3-pack Tri-Band Wi-Fi 6E

This mesh kit with three units is designed to extend Wi-Fi to several rooms. The product name mentions Tri-Band and Wi-Fi 6E; before buying, check that this version and its connection options suit your setup.

View at Joybuy

Frequently asked questions

Can a Wi-Fi booster increase the upload speed of my broadband plan?

No, a Wi-Fi booster doesn’t increase the capacity of your internet connection itself. First, measure the speed using a wired connection by the router, then measure it again in the study. If the wired upload speed is already limited, investigate your internet connection rather than simply buying an extender.

Where should I place a wireless repeater?

Place a wireless repeater somewhere it can still receive a good Wi-Fi signal from the router, rather than automatically putting it in the room with the weakest coverage. Then check the connection at your workspace. If cabling is available, a wired connection is another option.

Do I need to replace my router to use mesh?

That depends on the system and the features you want to use. The OneMesh integration described for the TP-Link RE605X requires a compatible OneMesh router, while the FRITZ! mesh settings mentioned require a suitable FRITZ!Box setup. Check compatibility with your own equipment.

What product requirements apply to a Wi-Fi booster sold in the Netherlands?

Radio equipment placed on the market in the Netherlands must meet the relevant European product requirements. The Rijksinspectie Digitale Infrastructuur states that the CE marking must be visible on the device and that the declaration of conformity must be supplied. This general requirement doesn’t confirm that a specific product meets it.

Does the legal guarantee in the Netherlands always end after two years?

No. According to ACM ConsuWijzer, the legal guarantee is separate from any manufacturer’s or seller’s guarantee, and depends on what you could reasonably expect from the product under normal use. If a product is faulty, contact the seller.