Who is this guide for?

Watching from a distant study

You want to know whether the Wi-Fi signal reaches your study through walls or between floors. The Consumers’ Association recommends first identifying where the signal starts to drop.

Households streaming on several devices

You want to enjoy a live concert stream while other devices are online. So look at performance at a distance and with several active devices, rather than relying on an advertised maximum speed alone.

Homes where a cable route may be possible

You may be able to run a network cable to your study and want to know whether an access point or mesh system with Ethernet backhaul would work for you.

What should you look for?

Reposition your existing router

Choose this if: your internet speed is sufficient over a cable and your router is in a poor position, such as in a utility cupboard.

Bear in mind: moving it may require a longer cable and won’t solve every weak-signal spot.

Wired access point

Choose this if: there’s a usable network cable in or near your study and you need Wi-Fi there.

Bear in mind: check the cable route, available ports and the correct operating mode.

Wireless mesh system

Choose this if: several rooms have poor signal, running cables isn’t practical and you can place an extra node where it can still connect to the main unit.

Bear in mind: placement matters. The number of nodes or Wi-Fi version alone won’t guarantee good coverage in your home.

What to consider What should you check? Who is this important for?
Coverage in the study Check the signal where you watch, and see where the router is and where an extra node could still connect. If I’m watching the concert in the distant study, I want to know whether the signal reaches it. Around 36% of consumers say coverage in that spot is their top priority.
Reliable streaming Compare speed and coverage at a distance, and also check your internet speed over a cable. When other devices are online, I want the live concert stream to keep working well. Around 29% of consumers say reliability when several devices are in use is their top priority.
Cables and connections Check the Ethernet ports, cable route, supported mode and any settings required by your provider. If there’s a network cable running to the study, I want to use it to get Wi-Fi in that room. Around 21% of consumers say a wired connection is their top priority.
Installation and running costs Check how many nodes you’ll need, how to manage them and, where available, compare measured energy consumption. I don’t want to add extra equipment if moving the router or changing its settings would do the trick. Around 14% of consumers prioritise ease of use and running costs.

Common buying mistakes

  • Buying a faster router when the internet connection is the problem

    A test done over Wi-Fi alone makes it difficult to tell whether the issue is with your internet connection or weak Wi-Fi coverage.

    First, test your speed over a network cable and compare the result with your broadband package. Then test it where you watch.

  • Putting a wireless mesh node in a room with no usable signal

    An extra node needs a usable connection of its own. Its position and the connection between nodes affect the result.

    Plan where to put it and check whether Ethernet backhaul is possible. You may need an extra node; running a cable could involve additional installation work.

  • Treating advertised Wi-Fi speed or coverage as a measurement of your home

    The Consumers’ Association has reported differences in coverage and speed between the mesh systems it tested. Walls and other obstacles can affect the signal in your home too.

    Compare relevant test results and, after installation, test the signal where you actually watch.

  • Replacing your provider’s router without checking the connection details

    Your provider may have specific settings and security requirements for equipment you supply yourself.

    Before choosing a replacement router or modem, check with your provider which settings and connections you’ll need. Bear in mind that some extra configuration may be required.

Relevant brands

TP-Link

The Deco X50 range we looked at includes mesh kits with different numbers of Wi-Fi nodes. It may be worth considering if you need several nodes or are thinking about Ethernet backhaul.

  • TP-Link lists three gigabit ports on each Deco X50 unit and support for Ethernet backhaul.
  • The coverage quoted by TP-Link doesn’t necessarily predict the signal in a study with walls or floors in between.

ASUS

The ZenWiFi XD5 we looked at is a mesh option. If you have the required Ethernet cabling, you can connect the nodes by cable.

  • ASUS lists Ethernet backhaul and setup through the Router app.
  • Before buying, check that the kit you choose and its connections suit your cable route and network.

FRITZ!

The FRITZ!Repeater 3000 AX we looked at is an option for extending an existing home network, especially if you want to keep your FRITZ!Box.

  • FRITZ! lists two gigabit LAN ports and LAN use with a FRITZ!Box; compatibility with other routers is also mentioned.
  • A repeater on its own isn’t a replacement for a modem and main router.

Joybuy products for extending Wi-Fi

These products are designed to extend Wi-Fi using mesh systems or an access point. Check that the connections and setup for each model suit your home.

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-Pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-Pack

A mesh kit for extending Wi-Fi to several areas of your home, with the option to run a cable between the nodes.

The product description lists two mesh units and Ethernet backhaul.

View at Joybuy
TP-Link Deco X50, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50, 3-pack, dual-band Wi-Fi 6

This mesh kit could suit you if you want to set up several Wi-Fi nodes and can use a wired connection between compatible nodes.

The kit contains three units and supports 2.4 GHz and 5 GHz. TP-Link lists three gigabit ports per unit and Ethernet backhaul for the Deco X50.

View at Joybuy
TP-Link Deco XE75 Pro, 3-pack, tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro, 3-pack, tri-band Wi-Fi 6E

A three-unit mesh kit for extending Wi-Fi to several areas of your home. Check that the listed bands and features suit your devices.

The product description lists tri-band 2.4/5/6 GHz, Wi-Fi 6E, QoS and three Ethernet ports per unit.

View at Joybuy
TP-Link Deco X50-PoE, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50-PoE, 3-pack, dual-band Wi-Fi 6

This kit may be worth considering if you want to set up several mesh nodes and are considering PoE as an installation option.

The kit contains three units. The product description lists Wi-Fi 6, PoE and two Ethernet ports per unit.

View at Joybuy
TP-Link Omada EAP613 Wireless Access Point

TP-Link Omada EAP613 Wireless Access Point

An access point for extending Wi-Fi in a spot with a suitable network connection.

The product description lists wall or ceiling mounting and power via PoE or DC. Check that this setup suits your room and network.

View at Joybuy

Frequently asked questions

Should I check my internet speed or Wi-Fi before buying?

First, test your internet speed over a network cable and compare it with your broadband package. Then check the Wi-Fi signal where you watch. This helps you tell the difference between an internet connection problem and weak Wi-Fi coverage.

Where should I put an extra Wi-Fi node?

Don’t automatically put a wirelessly connected node in the furthest room: it needs a usable connection of its own. Use the system’s placement guide, then check the signal in your study. If you have a suitable cable, you could use Ethernet backhaul with compatible models.

Can I use my own router in the Netherlands?

Yes. The ACM’s ConsuWijzer service says that you have the right to choose your own router in the Netherlands, but your own device may still need to meet security requirements and use specific settings. Check with your provider that the device is also compatible with your type of connection.

Does the legal guarantee on a router end after two years?

No. According to ACM ConsuWijzer, Dutch law doesn’t set a fixed duration for the legal guarantee. If a fault develops, your rights depend in part on what you could reasonably expect from the product with normal use. The retailer is your point of contact.

How much does it cost to run extra Wi-Fi nodes?

Running costs depend partly on the energy consumption of the devices you choose. Extra nodes use electricity, so compare measured energy consumption for specific models if you want to factor in ongoing costs.