Which studios could benefit from these network options?

A studio with weak spots along the corridor

If you want to connect workstations spread throughout the studio, start by checking the signal at each one. You can then decide where an additional Wi-Fi point would be useful. The Consumers’ Association recommends paying attention to where the router is placed and where you need a signal.

A studio with lots of shared files

For workstations and shared equipment, it’s worth weighing up wireless use against the Ethernet cables and ports available. Your choice will partly depend on which devices need a wired connection.

A studio with staff and visitors

If you want to give visitors access and tailor network management to the way your studio is used, compare guest network features and the requirements of the management platform. Don’t assume that mesh and access point systems offer the same features.

What should you look for when choosing Wi-Fi for a studio?

Start by checking the signal at your workstations, then choose the connection, features and extra equipment that suit your studio.

What to consider What to look for Who it matters to
Coverage along the corridor Check the signal at your workstations and see where you can position the router and any additional points. Check whether Ethernet runs to those locations. If I need a reliable connection at several points along the corridor, I want to know where the signal drops out first. Around 31% of consumers prioritise coverage at their workstations.
Wired design work Count the devices that need Ethernet and compare the number of WAN and LAN ports, as well as whether the exact model supports Ethernet backhaul. If workstations or shared equipment need a wired connection, I look at the ports and cables available. Around 25% of consumers give wired connections top priority for design work.
Visitor access Check whether guest access is available and whether the management platform suits your preferred network setup. If visitors need Wi-Fi alongside the studio team’s devices, I want to be able to manage access appropriately. Around 25% of consumers prioritise separate network access.
Easy expansion Check whether you can keep your provider’s device, which modes are available, how many points you need and how they are powered. If I want to expand my existing network with minimal extra installation, I look at how additional points connect and are powered. Around 19% of consumers consider easy expansion the most important factor.

Common Wi-Fi buying mistakes in a narrow studio

  • Assuming the stated coverage area guarantees coverage in your corridor

    Actual coverage also depends on the positioning of the device and its surroundings. A product specification can’t tell you how the signal will perform at every workstation in your studio.

    Check the signal at your workstations, then work out how many points you need and where you can put them.

    If coverage at your workstations falls short, you may need an additional Wi-Fi point or cabling.

  • Buying an access point as if it were a complete router

    An access point doesn’t automatically replace your router or other network components. Your setup may also require a router, switch or suitable PoE power supply.

    Before you buy, map out the connection from your provider’s service, through the router and any switch, to each access point.

    A wired setup may require cable installation and additional network or power equipment.

  • Assuming all products labelled mesh are interchangeable

    TP-Link states that Deco and Omada products don’t form a single mesh network together. Compatibility depends on the product range and hardware version.

    Before expanding your network, check that the additional point is supported by the exact product range and hardware version.

Brands to consider for a studio network

The features mentioned apply to specific product ranges and models; they aren’t a general assessment of an entire brand.

TP-Link

Deco is a mesh product range, while Omada EAP is designed for access points with business-focused management.

  • According to the official product specifications, Deco X50 supports Ethernet backhaul, X50-PoE offers several mounting options, and EAP610 V1 supports PoE+ and guest network features.
  • TP-Link states that Deco and Omada don’t form a single mesh network together. Compare the product ranges and hardware versions separately.

Ubiquiti

UniFi access points are worth comparing if you’re considering mounting options and network management through the UniFi platform.

  • The official specifications for the UniFi U6+ list ceiling mounting and a Gigabit Ethernet port.
  • The U6+ is an access point, not a complete internet router in its own right. Check the requirements for UniFi Network, power and other network components.

NETGEAR

The Orbi RBK763S is a specific tri-band mesh system to consider if you want to connect different areas without assuming you’ll have a wired backhaul.

  • NETGEAR lists a dedicated router-to-satellite connection, seven Gigabit ports and one year of Armor included with the RBK763S.
  • These manufacturer specifications don’t measure performance in a narrow studio. Check the terms for Armor after the included period.

Joybuy products for this studio

This selection includes a standalone router, mesh systems for several zones and a wired access point. The right option depends in part on the coverage you measure and the cables and network equipment available.

ASUS RT-AX52 AX1800 dual-band Wi-Fi 6 router

ASUS RT-AX52 AX1800 dual-band Wi-Fi 6 router

A standalone router to consider if your measurements suggest that one centrally positioned device could be enough.

The product information lists three Gigabit Ethernet ports and AiMesh support for expanding your network.

View at Joybuy
TP-Link Deco X50 3-pack dual-band Wi-Fi 6 mesh system

TP-Link Deco X50 3-pack dual-band Wi-Fi 6 mesh system

A mesh system to compare if several work zones need coverage and the points will connect to each other wirelessly.

The product information lists three mesh units included, three Gigabit Ethernet ports per unit and management through the Deco app, with a guest network.

View at Joybuy
HUAWEI eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

HUAWEI eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

A mesh router to consider if several zones need a connection and you want to manage the mesh setup through the app mentioned.

The product information lists dual-band Wi-Fi 7 and support for a mesh network with multiple units.

View at Joybuy
Huawei eKit OptiX FG630 AX3000 dual-band Wi-Fi 6 mesh router

Huawei eKit OptiX FG630 AX3000 dual-band Wi-Fi 6 mesh router

A mesh router to compare if several workstations need coverage and you want to set up a mesh network with roaming.

The product information lists AX3000, dual-band Wi-Fi 6 and management through the Huawei AI Life app.

View at Joybuy
TP-Link Omada EAP653 Wi-Fi 6 access point with PoE

TP-Link Omada EAP653 Wi-Fi 6 access point with PoE

A wired access point to consider if Ethernet is available and you want to mount a Wi-Fi point on the wall or ceiling. This access point is not a standalone, complete internet router.

The product information lists one Gigabit Ethernet port, PoE+ (802.3at), wall or ceiling mounting and VLAN support.

View at Joybuy

Frequently asked questions about Wi-Fi in a design studio

Can a business internet customer in the Netherlands use their own router?

Yes. According to the Authority for Consumers and Markets, you can choose your own modem or router, subject to certain conditions. Among other things, the device must meet your provider’s security requirements and be updated regularly. Before replacing it, ask which connection settings you’ll need.

Do you need to remove your provider’s existing modem when adding Wi-Fi points?

Not necessarily. You may be able to keep your existing device and use additional points as access points, or replace the router. TP-Link offers router and access point modes for Deco; an access point such as the EAP610 isn’t a complete internet router in its own right.

How do you decide where to put an additional Wi-Fi point in the corridor?

First, check the signal at your workstations, then assess the connection between the points you’re considering. The Consumers’ Association highlights the importance of positioning; a stated coverage area is no substitute for checking the signal in your studio.

What installation work or additional network components might you need?

It depends on your setup: wired points may require cables, a suitable switch or a PoE power supply, while mesh points need suitable positioning and power. For optional services, also check the terms after any included period; NETGEAR lists one year of Armor included with the Orbi RBK763S.

What should you look for in a Wi-Fi device for use in the Netherlands?

The Dutch Authority for Digital Infrastructure states that radio equipment sold in Europe must meet the applicable product requirements and carry the required CE marking. Check the marking and the exact product version on offer; a general product specification doesn’t, by itself, confirm the configuration of a specific item being sold.