Watching behind thick walls
You want to watch a theatre recording somewhere the router signal is weak. The Consumentenbond recommends placing Wi-Fi points with as few obstacles between them as possible.
A wireless repeater is only a sensible choice if it can still receive a usable signal from the router at an intermediate point. If the signal is weak there too, running an Ethernet cable to an access point avoids a wireless connection through the wall. If running a cable isn’t practical, you can test powerline adapters in the sockets you plan to use. Also check whether the playback is stuttering because of the Wi-Fi, rather than the internet connection or the recording source.
You want to watch a theatre recording somewhere the router signal is weak. The Consumentenbond recommends placing Wi-Fi points with as few obstacles between them as possible.
You may be able to run Ethernet to your viewing area or connect your TV by cable. Remember to consider not only the cable between the TV and the Wi-Fi point, but also the connection between that point and the router.
You can’t run a network cable to your viewing area and want to compare a wireless point placed in a suitable location with powerline using your existing sockets.
Suitable when: you have one area with a weak signal and the repeater can still get a good connection to the router from an intermediate point.
Trade-off: a repeater placed behind the thick wall won’t fix a weak wireless signal coming in.
Suitable when: you can run Ethernet up to or beyond the wall and want to provide Wi-Fi there for your playback device.
Trade-off: you’ll need a cable route, and the device must support access point or LAN bridge mode.
Suitable when: several rooms have poor coverage and you can place the points in suitable locations or connect them to each other by cable.
Trade-off: check that the mesh points work with your router; adding more points won’t automatically fix a weak connection.
Suitable when: running a long network cable isn’t practical and the wireless connection remains weak through the wall.
Trade-off: actual throughput depends on factors including your electrical wiring and interference on the circuit. Test the kit in the sockets you plan to use.
| What to consider | What to check before buying | Who is this important for? |
|---|---|---|
| Stable connection | Compare the signal in your viewing area with the signal at a possible intermediate point; check whether you can run Ethernet beyond the wall. | If playback stutters specifically behind the thick wall, you’ll want to know whether the Wi-Fi point itself is receiving a good signal. Around 36% of consumers prioritise stable coverage above all else. |
| Connecting your playback device | Check whether your TV has an Ethernet port and whether your chosen Wi-Fi point can work as a wired access point. | If you want to connect your TV or another playback device by cable, consider both parts of the connection. Around 29% of consumers prioritise device connectivity. |
| Placement and compatibility | Check the placement guidance and whether the mesh feature works with your router. | If you want a solution you can install in a suitable location, compatibility with your existing router matters. Around 21% of consumers put placement and compatibility first. |
| Costs and alternatives | Test your internet connection using a wired connection at the router; test powerline in the sockets where you plan to use it. | If you want to rule out the internet connection or recording source as the cause of the stuttering, you may be able to delay buying anything. Around 14% of consumers cite costs and alternatives as their main consideration. |
A wireless repeater still needs to connect to the router. Behind a thick wall, the signal coming in may already be too weak.
First, try an intermediate point where the router signal is usable. If that doesn’t work, compare Ethernet backhaul with powerline.
Your TV may be connected by cable to a repeater, while the repeater itself communicates with the router wirelessly.
Check the connection between the TV and the Wi-Fi point, and the connection between the Wi-Fi point and the router, separately.
Actual throughput depends on factors including interference on the circuit and the quality of your electrical wiring.
Test the kit in the sockets you plan to use while playing the recording.
Mesh features can depend on your router. TP-Link says OneMesh on the RE705X requires a OneMesh router; FRITZ! describes Mesh compatibility within a FRITZ! network.
Check the requirements for the specific combination of router and Wi-Fi point.
The RE705X is a standalone Wi-Fi 6 repeater with a gigabit port, access point mode and OneMesh.
The FRITZ!Repeater 1200 AX is an option for an existing FRITZ! network and, according to the manufacturer, can also be used with another router.
Magic 2 WiFi next uses powerline to reach an area where the Wi-Fi is weak and running a network cable isn’t practical.
This selection focuses on wired access points and mesh kits, including models that support wired backhaul. The Dutch Authority for Digital Infrastructure states that radio equipment sold in the Netherlands must meet the relevant European requirements and carry a CE mark; check this on the specific product.
No image available
A wired access point for a viewing area with Ethernet; the product information says it can be mounted on a ceiling or wall.
Wi-Fi 7; 2.5 GbE uplink; PoE+ (802.3at). For indoor use unless installed in a suitably protected environment, and requires compatible PoE+ equipment.
No image available
A mesh kit with two units for anyone looking to use multiple Wi-Fi points; the product information lists both wired and wireless backhaul.
Multiple WAN/LAN ports per unit.
No image available
A mesh system for anyone looking to extend coverage at home and able to use wired backhaul.
Wi-Fi 7; two 2.5 GbE ports; dual-band 2.4 GHz / 5 GHz. The product information lists compatibility with other ASUS mesh systems for expanding the network.
No image available
A wired access point for a viewing area with Ethernet; the product information says it can be mounted on a ceiling or wall.
Dual-band Wi-Fi; one gigabit Ethernet port; PoE power option.
No image available
A mesh kit with two nodes for anyone looking to use multiple mesh points.
Tri-band Wi-Fi 7. For expanding the network, the product information lists other Velop Pro 7 nodes or compatible Linksys Cognitive Mesh devices.
Not necessarily. Compare playback somewhere close to the router and test your internet connection there using a wired device. This can help you work out whether Wi-Fi coverage is the cause. If the recording is stored locally, the playback route may also be a factor.
Place it somewhere it can still get a good signal from the router, rather than automatically putting it in the room with the poorest coverage. The Consumentenbond recommends placing Wi-Fi points with as few obstacles between them as possible; also use the device’s placement guidance.
Only if the connection between the repeater or access point and the router also uses Ethernet. So check both the playback device’s connection and the Wi-Fi point’s backhaul.
Check that the kit includes a Wi-Fi adapter and works with your existing adapters. Test the connection in the sockets you’ve chosen: according to devolo, factors including interference and the quality of your electrical wiring affect actual throughput. Powerline can also cause interference with certain VDSL connections.
Don’t assume it does without checking. Check the requirements for the specific combination of router and Wi-Fi point. According to TP-Link, OneMesh on the TP-Link RE705X requires a OneMesh router, while FRITZ! explains the Mesh compatibility described for use within a FRITZ! network.