Who is this for?

Film fan in a room with a weak signal

If your connection mainly drops out when you’re far from the router, it may be worth looking into a well-placed repeater. The Consumers’ Association (Consumentenbond) recommends positioning a booster where the signal is still usable.

Housemate on a busy Wi-Fi network

If you watch films while other people in your home are online, check the connection where you watch at a busy time. Netflix recommends 15 Mbps or more for its 4K UHD streaming; this isn’t a general requirement for every film or streaming service.

Resident extending a shared network

Your existing router and available cabling will help determine whether a standard repeater, mesh feature or access point is right for you. Check with the router and repeater manufacturers to confirm support for the feature you want.

What to look for when extending your Wi-Fi

One wireless repeater

Choose this when: one room has poor coverage, but there’s still a spot between the router and that room with a usable signal.

The trade-off: the repeater’s wireless connection to the router will determine how well it can pass on the signal.

Wired access point

Choose this when: you can run an Ethernet cable to a suitable spot and the device has access point mode.

The trade-off: you’ll need a cable route and somewhere to connect the access point.

Multiple mesh Wi-Fi points

Choose this when: coverage is poor in several rooms and the points can work with your router.

The trade-off: you’ll need several devices. A standalone repeater won’t automatically work as a mesh node with every router.

What to consider What to look for when buying Who is this important for?
Usable coverage Compare the connection by the router with the one where you watch. Try a spot in between, and use a signal indicator if needed. If I watch a film in a room with a weak signal, I want to know whether the repeater itself still has a good connection to the router. Around 36% of consumers prioritise coverage where they watch.
Simultaneous use Test the connection at a busy time. Netflix recommends 15 Mbps or more for 4K UHD; this applies to that stream and isn’t a universal requirement. If other people in my home are online at the same time, I want to check the connection then, not just when the network is quiet. Around 29% of consumers prioritise simultaneous use.
Router compatibility Check the exact router model and its support for mesh separately from its standard Wi-Fi connection. If I want to keep using my existing router, I want to be sure the network feature I choose will work with it. Around 21% of consumers make compatibility their top priority.
Ethernet cable Check whether you can run a cable to the spot you want and whether the model has access point mode and the necessary Ethernet port. If there’s already a cable, or I can install one, I want to know whether I can use it to connect a wired access point. Around 14% of consumers check the wired option first.

Common buying mistakes

  • Assuming a high AX or Mbps rating guarantees film-streaming speeds

    The stated radio speed isn’t the same as the connection you’ll get where you watch. Positioning, equipment and simultaneous use all play a part.

    Test the connection where you watch, ideally while other people in your home are using the network. Compare models based on the features you need, not just their stated speed.

  • Putting the repeater where coverage is worst

    A repeater still needs to receive a signal from the router to pass it on.

    Try a spot between the router and the room where you watch. If available, use the signal indicator or setup app, then check the connection in the room.

  • Assuming mesh works with every router

    Mesh features can depend on the combination of devices. A standard Wi-Fi connection doesn’t automatically mean all mesh features are available.

    Check the exact router model and the requirements for the mesh feature you want to use.

Brands to consider

TP-Link

The RE605X and RE700X are examples of Wi-Fi 6 repeaters with a Gigabit port and access point mode.

  • TP-Link says the RE605X can extend an existing Wi-Fi router’s coverage.
  • OneMesh requires a OneMesh-compatible router. Stated radio speeds are manufacturer figures, not measurements from a shared home.

FRITZ!

The FRITZ!Repeater 1200 AX is a compact Wi-Fi 6 repeater with a LAN connection.

  • FRITZ! describes settings transfer and mesh compatibility with a FRITZ!Box, and also mentions use with other routers.
  • If you have a different router, check which features are available. The stated data rate is a manufacturer figure.

devolo

According to devolo, the WiFi 6 Repeater 5400 has two Gigabit LAN ports and supports mesh with other devolo Wi-Fi products.

  • devolo mentions a positioning indicator and connection to existing routers.
  • The stated maximum speed of 5400 Mbit/s isn’t a measured speed for a single film stream.

Joybuy products

This selection includes mesh Wi-Fi points and wired access points for extending Wi-Fi coverage.

TP-Link Deco BE68 2-Pack

TP-Link Deco BE68 2-Pack

A mesh set with two units could be a good option if you want to extend your Wi-Fi across several rooms.

The product name specifies a 2-pack. Check that the mesh devices are compatible with your existing network.

View at Joybuy
Ubiquiti UniFi AP U7 Long-Range

Ubiquiti UniFi AP U7 Long-Range

A wired access point could be a good option if there’s a network connection where you want to install it.

The product information specifies a 2.5-Gigabit uplink and PoE+. This setup requires compatible PoE+ equipment and management through the UniFi Network platform.

View at Joybuy
ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7

ASUS ZenWiFi BD4 Dual-Band (2.4 GHz / 5 GHz) Wi-Fi 7

A mesh system could be a good option if you want to extend your Wi-Fi coverage across several rooms.

The product name specifies Wi-Fi 7 and Dual-Band (2.4 GHz / 5 GHz). Check that your devices and router support the network features you want to use.

View at Joybuy
TP-Link EAP725-Wall 5012 Mbit/s, with PoE

TP-Link EAP725-Wall 5012 Mbit/s, with PoE

A wired access point could be a good option if you can run a cable to the installation spot.

The product name specifies PoE. This setup requires Power over Ethernet.

View at Joybuy
TP-Link Deco XE75 Pro 3-Pack Tri-Band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-Pack) Tri-Band Wi-Fi 6E

A mesh set with three units could be a good option if you want to extend your Wi-Fi across several rooms.

The product name specifies Wi-Fi 6E and a 3-pack. Check that your devices and router support the features you want to use.

View at Joybuy

Frequently asked questions

How can you tell whether the problem is the repeater or the internet connection?

Compare the connection by the router with the one where you watch, ideally while other people in your home are online. For Netflix, you can use the network check in the TV app. If the connection also drops out by the router, investigate your existing internet connection before buying equipment to extend coverage.

Where should you put a wireless repeater?

Place a wireless repeater somewhere in between, where it can still receive a usable signal from the router. Don’t automatically put it in the room with the weakest coverage. If available, use a signal indicator or setup app, then test the connection where you watch.

Which legal product check is relevant when buying in the Netherlands?

Wi-Fi repeaters are radio equipment. According to the Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur), radio equipment that meets the applicable requirements must carry a CE marking to be placed on the market in the European Union. Check the marking and information for the exact product model.

What does a manufacturer’s warranty mean for your rights when buying from a Dutch seller?

A manufacturer’s warranty doesn’t replace your statutory rights. According to ACM ConsuWijzer, the seller remains responsible for providing an appropriate solution if the product doesn’t do what you could reasonably expect under normal use, subject to the applicable terms.

Can you try out a repeater bought online at home?

For a standard online consumer purchase, you’ll generally have a statutory cooling-off period of up to 14 days after delivery, although there are exceptions. ACM ConsuWijzer recommends checking the terms for trying out and returning the product before you order.