What should you consider when choosing?
Move or configure your existing router
A good fit when: the internet connection itself is fast enough and a change of position or settings gives you usable Wi-Fi in both places where you watch the class.
Bear in mind: distance, walls and floors may still limit coverage.
One new Wi-Fi router
A good fit when: your current router isn’t up to the job and one well-positioned router can reach both places where you watch the class.
Bear in mind: a higher advertised Wi-Fi speed doesn’t necessarily mean the signal will reach the distant room; check compatibility with your provider’s connection too.
Wired access point or mesh with Ethernet backhaul
A good fit when: you can run a network cable to a suitable spot and connect an extra Wi-Fi point there.
Bear in mind: you’ll need a cable and a suitable Ethernet port.
Wireless mesh system
A good fit when: one router doesn’t provide enough coverage, you can’t run a cable to the study and an intermediate node can still receive a usable signal.
Bear in mind: positioning and obstacles still matter; mesh nodes that are always on use electricity.
Start by testing your internet connection over a cable, then check the Wi-Fi where you watch the class. If coverage is weak, Consumentenbond advises against automatically putting an extra point in the hardest-to-reach room. Try a spot with fewer obstacles instead.
| Concern |
What to look for |
Who is it most relevant to? |
| Coverage in the study |
Measure the signal where you watch; compare the router’s position with an intermediate point. If you’re considering mesh, check the number of nodes and whether Ethernet backhaul is possible. |
If I want to take a class in the distant study, I need a usable connection there and a Wi-Fi point in a suitable spot. Around 36% of consumers put coverage first. |
| A stable picture during the class |
Test the internet connection over a cable and check the Wi-Fi where you’ll actually be watching. |
If I want to avoid interruptions, I first need to know whether the problem is with the internet connection or the Wi-Fi at home. Around 29% of consumers prioritise stability during the class. |
| Cost of the solution |
First try repositioning your existing equipment; then compare the complete set and the number of points you need. |
If I don’t want to buy equipment I don’t need, I’ll first see whether a different position is enough, then consider the cost of an extra point. An estimated 21% of consumers put total cost first. |
| Connection and setup |
Check how the first extra point connects to your provider’s router and which settings are required. |
If I want to keep my provider’s router, I need to know in advance how the extra system connects to it and how to set it up. Around 14% of consumers give connection and setup top priority. |
Joybuy product picks
This selection includes standalone routers for anyone looking to replace a single device, and mesh sets for those who want to install several Wi-Fi points. Check which version suits your provider’s connection and the places where you watch the cookery class.
No image available
TP-Link TL-WR841N wireless router
For anyone looking for a single new router with wired connections for their devices.
The product description lists 2.4GHz Wi-Fi up to 300 Mbit/s and four Fast Ethernet LAN ports.
Joybuy
No image available
TP-Link Deco E4 (3-pack)
For anyone looking to install several mesh points and needing wired connections on each unit.
The product description lists dual-band Wi-Fi 5 and two network ports per unit. A set with three points gives you more placement options, but doesn’t guarantee coverage in every room.
Joybuy
No image available
TP-Link TL-WR802N V4 router
For anyone looking for a single router with a wired connection to the device.
The product description lists Wi-Fi 4 on 2.4 GHz up to 300 Mbit/s and one network port up to 100 Mbps.
Joybuy
No image available
ASUS RT-AX52 AX1800
For anyone looking for a single Wi-Fi 6 router, with the option to add compatible ASUS AiMesh routers later.
The product description lists dual-band Wi-Fi and AiMesh compatibility. Before expanding your system, check that the other devices are compatible.
Joybuy
No image available
TP-Link Deco X50 (3-pack)
For anyone looking to install several mesh points and able to use a wired connection between them.
The product description lists dual-band Wi-Fi 6, three gigabit ports per unit and optional Ethernet backhaul. Check that the set size and connection options suit your home.
Joybuy
Frequently asked questions
Should I buy a new router straight away if the cookery class keeps buffering?
No. First, test your internet speed using a network cable, then check the Wi-Fi where you watch the class. This will help you work out whether the problem is with the internet connection or the Wi-Fi at home.
Where should I put a wireless mesh point for the study?
Don’t automatically put it in the room with the weakest signal. If coverage is weak at the back of the house, Consumentenbond advises placing a point closer to the middle, with as few obstacles as possible between the points.
Can I use my own router in the Netherlands?
In principle, you can choose your own router, but conditions may apply. According to ACM ConsuWijzer, a provider may refuse a device, for example if it isn’t safe, and must make the necessary connection settings available. Check what type of connection you have too.
What should I look for in a Wi-Fi router’s CE marking?
Check that the specific version you’re buying carries the correct CE marking. The Dutch Authority for Digital Infrastructure states that equipment must carry the CE marking.
What if the router breaks sooner than expected?
In the Netherlands, statutory consumer rights apply alongside any manufacturer’s warranty. ACM ConsuWijzer explains that the seller is responsible for providing a suitable solution if, under normal use, the product doesn’t do what you could reasonably expect. There isn’t one fixed statutory warranty period for every router.