Who is this guide for?

For anyone with weak Wi-Fi at the back of the house

Your screen is at the end of the corridor, where the signal drops out. You want to know whether an extra, well-positioned Wi-Fi point could help. The Consumentenbond recommends placing a booster closer to the middle of the house if the signal is weak at the back.

For anyone who can run a network cable

You can connect a cable further along and want to avoid relying on a wireless signal between Wi-Fi points. TP-Link describes wired connections between Deco points as one possible set-up.

For anyone who wants to keep their provider’s router

You want to check your connection first and, if you need to extend it, keep your existing network. TP-Link describes an access point mode for Deco, in which your existing router continues to manage the network.

What should you look for?

Start by checking the connection at your TV or connected streaming device. This will help you work out whether to focus on coverage, the connection between Wi-Fi points or the router itself.

Keep your existing router and check the connection first

When to choose it: If it’s not yet clear whether the issue is with Wi-Fi or your internet connection, or if the signal where you watch may already be strong enough.

The trade-off: Checking the connection and router placement could save you from buying anything, but it won’t always fix persistent weak coverage at the back of the house.

Wired access point or mesh with Ethernet backhaul

When to choose it: If you can run a network cable to a suitable spot further along.

The trade-off: The connection between Wi-Fi points then runs over the cable. You’ll need a suitable cable route and compatible connections.

Wireless mesh system with multiple points

When to choose it: If you can’t run cables and can place an extra point somewhere that still gets a good signal from the main network.

The trade-off: You can position the points flexibly, but one at the far end of the corridor may itself have a weak wireless connection.

New standalone router

When to choose it: If your checks and measurements suggest that the router itself needs replacing.

The trade-off: Check your provider’s connection requirements and settings. A new router won’t automatically overcome distance or obstacles.

What to consider What should you check? Who is this important for?
Coverage where you watch Check the signal by your screen and work out where an extra point can still get good reception. Check how many points are included in the set. If my TV is at the back of the corridor, I mainly want to know whether the Wi-Fi signal is strong enough there. Around 36% of consumers say coverage where they watch is their main reason for buying.
Connection between Wi-Fi points Check whether you can run a cable and whether the exact model supports Ethernet backhaul. If I can run a cable, I’d rather not rely on a wireless signal for the connection between points. Around 29% of consumers prioritise a wired connection between Wi-Fi points.
Connection to your existing network Check whether the system supports access point mode. If you’re replacing your router, find out which settings your provider requires. I want to keep my provider’s router for now and only add Wi-Fi if it turns out to be necessary. Around 21% of consumers say connection to their existing network is their main reason for buying.
Speed for your preferred picture quality Check the connection on your streaming device, taking into account your preferred resolution and other devices being used at the same time. I want to know what speed is available where I watch, so I can get the picture quality I want. Around 14% of consumers put this check first.

Common mistakes

  • Assuming a higher router speed rating means better coverage

    Distance and obstacles still affect the connection at the end of the corridor. The Wi-Fi generation shown on the packaging doesn’t, by itself, tell you how a device will perform in your home.

    Check the connection by your screen, then look at the positioning and the connection route between points.

  • Putting a wireless mesh point where the Wi-Fi signal is already very weak

    A wireless point needs a usable connection to the network itself before it can extend the signal.

    Try a spot closer to the middle of the house. Consider Ethernet backhaul if you can run a cable.

  • Treating a result based on another test as if it came from the exact same version

    For the Deco X20 (2-pack), the Consumentenbond notes that the test result shown is based on the 3-pack. The version named in the test was the Deco X20 (EU) Ver:2.0.

    Check the number of units in the pack and the hardware version. Don’t assume a result based on one version applies to another.

Brands to compare

TP-Link

Deco mesh systems are worth considering if you want to extend your Wi-Fi and choose between wireless and wired connections between points.

  • TP-Link describes using Deco alongside an existing router in access point mode, as well as wired connections between Deco points.
  • Check how each model and version works and what connections it has. A brand description can’t predict coverage in your corridor.

ASUS

The ZenWiFi XD5 is a mesh option for anyone wanting to use multiple Wi-Fi points and potentially make use of existing network cables.

  • ASUS says the XD5 supports Ethernet backhaul when there are Ethernet ports in the walls.
  • The stated wireless performance figures come from the manufacturer and can’t predict the actual speed when there are obstacles.

FRITZ!

FRITZ!Repeaters and FRITZ!Mesh are worth considering if you want to extend a compatible existing FRITZ! network towards the corridor.

  • FRITZ! describes a wired LAN connection for a repeater with a LAN port, as well as cascading to extend coverage in a particular direction.
  • Check which features your existing devices support. A repeater isn’t automatically a replacement for your router.

NETGEAR

Orbi is a mesh product range to compare if you’re looking for a system with multiple Wi-Fi points.

  • NETGEAR presents Orbi as a mesh system for Wi-Fi coverage in multiple parts of the home.
  • Compare the connections on the exact set you’re considering. Manufacturer claims aren’t an independent measure of performance in your corridor.

Joybuy products for this situation

This selection includes mesh sets with multiple points and a wired access point. The right set-up for you depends on factors including your cable route, existing router and signal strength where you watch.

TP-Link Deco X50 (3-pack) Wi-Fi 6 mesh set

TP-Link Deco X50 (3-pack) Wi-Fi 6

A mesh set with multiple points to consider if you want several options for positioning devices around your home.

Specifications: 3-pack; Wi-Fi 6 (802.11ax); dual-band (2.4 GHz/5 GHz).

View at Joybuy
TP-Link Omada EAP653 wireless access point with PoE

TP-Link Omada EAP653 Access Point

A wired access point to consider if you can use a fixed network connection in a suitable spot.

Specifications: 2976 Mbit/s; Power over Ethernet (PoE).

View at Joybuy
TP-Link Deco S7 (3-pack) Wi-Fi 5 mesh set

TP-Link Deco S7 (3-pack) Wi-Fi 5

A mesh set with three points to consider if you want more options for positioning devices without adding a wired access point.

Specifications: 3-pack; dual-band (2.4 GHz/5 GHz); Wi-Fi 5 (802.11ac).

View at Joybuy
TP-Link Deco X50-PoE (3-pack) Wi-Fi 6 mesh set

TP-Link Deco X50-PoE (3-pack) Wi-Fi 6

A mesh set to consider if you want to position multiple points and are considering a wired installation.

Specifications: 3-pack; dual-band (2.4 GHz/5 GHz); Wi-Fi 6 (802.11ax); 2 Ethernet ports.

View at Joybuy

Frequently asked questions

How can you check whether the speed is good enough where you watch?

Check the connection on your TV or connected streaming device, not just next to the router. Netflix recommends a stable connection of at least 3 Mbps for HD 720p, 5 Mbps for Full HD 1080p and 15 Mbps for UHD 4K. These are Netflix recommendations, not a guarantee of router performance.

Where should you put an extra wireless Wi-Fi point in the corridor?

Choose a spot where the point itself still gets a good connection to your existing network, rather than automatically placing it right next to the TV. If the signal is weak at the back of the house, the Consumentenbond recommends placing a point closer to the middle and minimising obstacles between points.

Can you keep using your provider’s router?

Yes, if the system you choose supports a suitable access point mode. TP-Link describes this option for Deco. Check the settings and connections on the exact model before adding it.

When should you choose a cable between Wi-Fi points?

A wired connection is worth considering if you have a suitable cable route and compatible ports, and want to avoid a wireless connection between points. Check that the model you choose supports Ethernet backhaul.

Can you use your own router or Wi-Fi system in the Netherlands?

ACM ConsuWijzer explains that you’re free to choose your router, with some exceptions, including when a device is unsafe. According to the Dutch Authority for Digital Infrastructure, home Wi-Fi can be used without a licence if you follow the rules on designated frequencies and conditions of use. Radio equipment must also meet the applicable European requirements.