Who are these solutions for?

People who often make video calls from the loft

If you regularly work from the loft, what matters most is a connection that remains usable during calls. Zoom Support outlines the bandwidth requirements for group video calls; good coverage in the loft alone doesn’t tell you whether the connection to your router is stable.

People looking to fix one Wi-Fi dead spot

A repeater may be suitable if the loft is the main problem area and you can place the device somewhere that still receives a signal from the router. TP-Link’s installation guide emphasises that the repeater must be within the router’s range.

People with poor coverage on several floors

If other rooms also have weak Wi-Fi, compare the benefits of adding several Wi-Fi access points with what your current router can offer. When testing Wi-Fi boosters, the Consumentenbond considers factors including speed, ease of use, features, energy consumption and security.

What should you look for?

Wireless repeater

Suitable when: you mainly want to improve coverage in one dead spot and the repeater can still receive a signal from the router on the way to the loft.

Trade-off: the connection back to the router remains wireless; having an Ethernet port on the repeater doesn’t make that connection wired.

Wired access point or mesh node

Suitable when: you can run an Ethernet cable to the loft and the wireless connection between floors isn’t good enough.

Trade-off: running a cable takes work; also check that the device supports access point mode or LAN backhaul.

Multiple mesh nodes

Suitable when: other rooms or floors as well as the loft have poor coverage.

Trade-off: check how many nodes you need and whether the mesh feature works with your router. Systems designed for a particular brand aren’t automatically compatible with one another.

Powerline with a Wi-Fi access point

Suitable when: the wireless signal between floors isn’t good enough and running an Ethernet cable isn’t practical.

Trade-off: performance can vary between sockets. Test the sockets you plan to use before relying on powerline for meetings.

First decide whether you need to improve coverage in one dead spot or several rooms. Then check whether you can run a cable and whether the connection is actually usable where you plan to set up.

What to consider What should you check? Who is this most relevant to?
Connection during calls Compare a call and a connection test near the router with the same tests in the loft; check whether you can run a cable to an access point or use LAN backhaul. If I regularly make calls from the loft, I want the picture and sound to remain usable throughout the call. Around 36% of consumers prioritise call stability above all else.
Coverage and placement Find a socket on the way to the loft that’s still within the router’s range; use the signal indicator or setup guide, then test the connection where you work. If the loft is the main area with poor coverage, I want to improve it without immediately installing multiple nodes. Around 29% of consumers prioritise improving coverage in one dead spot above all else.
Router compatibility Make a note of your router model and check the mesh feature and operating mode required for each device. If I want to extend my existing network, I need to know whether the new node will work with my router. Around 21% of consumers put compatibility first.
Installation and equipment Count the nodes, adapters, cables and spare sockets you’ll need; test powerline at the sockets you plan to use. If improving the connection in the loft is achievable, I want to avoid unnecessary equipment and installation work. Around 14% of consumers prioritise the equipment needed and practical considerations above all else.

Common pitfalls

  • Buying a repeater before checking where to put it

    A wireless repeater won’t provide good coverage in the loft if it receives too weak a signal from the router where it’s installed.

    Before you buy, check which sockets you could use between the router and your workspace. Once installed, test it with a real video call in the loft.

  • Assuming every mesh device will work with your router

    Features such as OneMesh, AiMesh and FRITZ!-mesh depend on compatible equipment. A standard repeater connection isn’t the same as integration with one of these mesh systems.

    Check your router model and the mesh feature it requires separately, as well as the standard repeater or access point mode.

  • Assuming the advertised speed is what you’ll get in the loft

    The stated Wi-Fi or powerline speed won’t tell you how well the connection will perform in your loft. Devolo warns that some sockets can deliver lower transfer speeds and that electrical appliances can affect the connection.

    Test the sockets you plan to use and make a video call from your workspace. If possible, compare the result with an Ethernet connection.

Brands to compare

TP-Link

The RE605X is an example of a standalone Wi-Fi 6 repeater for one dead spot, with a signal indicator, gigabit Ethernet and access point mode.

  • The signal indicator can help you assess whether you’ve chosen a suitable place for the repeater.
  • According to TP-Link, OneMesh requires a compatible OneMesh router. The quoted wireless speeds don’t measure video call performance in a Dutch loft.

FRITZ!

The FRITZ!Repeater 1200 AX is worth considering as a repeater or as a LAN-connected access point in a compatible FRITZ! home network.

  • FRITZ! describes a gigabit LAN connection and mesh integration with a compatible FRITZ!Box.
  • Don’t assume the same brand-specific mesh integration will work with every router.

ASUS

The RP-AX58 offers repeater, access point and media bridge modes. AiMesh is a separate option for a compatible ASUS router.

  • ASUS lists one gigabit Ethernet port and several operating modes.
  • ASUS says 160 MHz on 5 GHz isn’t available in every region, so don’t assume this channel width is available on the version being sold.

devolo

The Magic 2 WiFi 6 next Starter Kit offers powerline with Wi-Fi at the other end. It may suit you if the wireless signal struggles to pass through floors and running a cable is difficult.

  • According to devolo, the starter kit includes two adapters and the Wi-Fi device has two gigabit ports.
  • devolo notes that some sockets deliver lower transfer speeds and electrical appliances can affect the connection; test it in your own home.

Product picks at Joybuy

These product picks cover powerline with Wi-Fi, multiple mesh nodes, and wired or wireless Wi-Fi extension for a loft workspace. When buying equipment sold in the Netherlands, check that it has the correct CE marking and is the EU version being offered. The Dutch Authority for Digital Infrastructure outlines these product requirements.

TP-LINK TL-WPA7517 KIT powerline adapter starter kit

TP-LINK TL-WPA7517 KIT powerline adapter starter kit

A powerline Wi-Fi kit for using your existing electrical wiring to connect to another room. Check the connection at the sockets you plan to use.

View at Joybuy
TP-Link Deco X50 3-pack dual-band Wi-Fi 6

TP-Link Deco X50 3-pack, dual-band Wi-Fi 6

A mesh system with three units for improving coverage in the loft and other rooms. Check that it’s compatible with your existing network.

The product information lists 2.4 GHz and 5 GHz bands, and three gigabit Ethernet ports per unit.

View at Joybuy
TP-Link Deco XE75 Pro 3-pack tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro 3-pack, tri-band Wi-Fi 6E

A mesh system with three units for improving coverage in several rooms. Check that the connections and setup suit your network.

The product information lists 2.4 GHz, 5 GHz and 6 GHz bands, plus three Ethernet ports per unit, including a 2.5-Gbit/s port.

View at Joybuy
TP-Link TL-WA801N access point and Wi-Fi network extender, N up to 300 Mbps

TP-Link TL-WA801N access point and Wi-Fi network extender

An access point or extender for adding a local Wi-Fi access point. Check that the mode you choose and the wired connection suit the planned setup.

The product name lists N up to 300 Mbps, two antennas, WPS and Passive PoE. The product information also lists 2.4 GHz and 10/100-Mbit/s Ethernet.

View at Joybuy
TP-Link Omada EAP613 Wi-Fi 6 access point

TP-Link Omada EAP613 Wi-Fi 6 access point

A wired access point for running an Ethernet cable to the loft. The product information lists wall or ceiling mounting and setup via the Omada app or a local controller.

The product information lists Wi-Fi 6, gigabit Ethernet and PoE or DC power. You’ll need an Ethernet cable to connect the access point.

View at Joybuy

Frequently asked questions

Will a Wi-Fi booster fix every video call that keeps freezing?

No. A Wi-Fi booster won’t fix every cause of interruptions. First compare the connection near the router with the one in the loft, and check your internet connection too. For group video in 720p, Zoom lists a bandwidth requirement of 2.6 Mbit/s download and 1.8 Mbit/s upload. These are requirements for the application, not a guarantee of stable performance from a specific repeater.

Where should you place a wireless repeater?

Don’t automatically put a repeater in the loft. Choose a socket on the way to the dead spot where the router’s signal is still strong enough. TP-Link’s installation guide suggests starting at about the halfway point. Move it closer to the router if the signal indicator shows a weak connection, then test it in the loft.

What costs and service should I consider in addition to the purchase price?

Check how many nodes or adapters you’ll need, whether you have to run cables, how much power the setup will use and what terms the seller offers. According to the Dutch government, when you buy from a business online, you’ll usually have a 14-day cooling-off period. Ask the seller about any relevant exceptions and their returns policy.

Do you need a permit or registration to use Wi-Fi at home in the Netherlands?

In general, you can use Wi-Fi in the Netherlands without a permit, and there’s no notification or registration requirement for licence-exempt frequency use, as long as you follow the designated frequencies and conditions of use. Equipment sold on the market must also meet European product requirements and have the correct CE marking, according to the Dutch Authority for Digital Infrastructure.