First, measure your upload speed using a wired connection and compare it with Wi-Fi at your design workstation. A new router will not increase the upload speed of a limited internet connection. If the main issue is poor Wi-Fi coverage behind walls or ceilings, consider repositioning your equipment, adding a wired access point or using mesh with multiple nodes. Before buying, also check how the device connects to your provider’s equipment, which operating mode you need and whether the device has a CE marking.
Who is this guide for?
Designer with a hard-to-reach workspace
You upload files from an area of the loft where walls, ceilings or distance weaken the Wi-Fi signal. In that case, the position of an extra Wi-Fi node may matter more than a higher speed rating. The Consumers’ Association (Consumentenbond) lists walls, ceilings and other obstacles as factors that can interfere with the signal.
Creator of large design files
You regularly send or sync large files and want to find out whether your internet connection or local wireless network is the bottleneck. The Consumers’ Association points out that upload speed matters when sending and syncing files.
Buyer who wants to manage their own network
You want to connect your own router, so you’re paying attention to provider settings, connections and security updates. ACM ConsuWijzer explains that you can choose your own equipment; also check which settings your connection requires.
What should you look out for when setting up Wi-Fi in your loft?
Start by finding out whether your internet upload speed or the Wi-Fi signal at your design workstation is the limiting factor. This will help you decide whether to adjust your current setup, add a router or wired access point, or install multiple Wi-Fi nodes.
| What to consider |
What should you check? |
Who is this most relevant for? |
| Coverage at your workspace |
Compare Wi-Fi at your workspace with a wired connection, and check where an extra node could go. |
If I upload from an area behind walls or ceilings, I want to know where a Wi-Fi node is needed. Around 36% of consumers give coverage at their workspace top priority. |
| Upload speed |
Measure your upload speed using a wired connection and then over Wi-Fi; compare the results with the speed your connection provides. |
If I send large design files, I want to know whether my internet connection or Wi-Fi is limiting the transfer. Around 29% of consumers prioritise file transfers. |
| Connection and management |
Check the router or access point mode, the ports and the settings your provider makes available. |
I want to connect my own router correctly and keep its software up to date. Around 21% of consumers give connection and management top priority. |
| Expansion required |
Work out how many Wi-Fi nodes you need and whether you can run a network cable to an access point. |
I don’t want to choose extra equipment or a different connection until measurements show it’s necessary. Around 14% of consumers prioritise avoiding unnecessary upgrades. |
Equipment placed on the market in the Netherlands must meet the applicable European requirements for radio equipment and carry a CE marking. Check the marking on the device being offered; a product listing alone does not confirm that an individual item complies.
Common pitfalls when choosing Wi-Fi for design files
-
Assuming the stated Wi-Fi speed is the same as your upload speed
Your home Wi-Fi and the upload speed of your internet connection are two different things. A higher Wi-Fi speed rating won’t automatically increase the upload capacity of your broadband plan.
Before choosing equipment, compare a wired upload speed test with a Wi-Fi test at your design workstation.
-
Expecting one new router to fix every dead spot
Walls, ceilings and distance can all affect coverage. Moving your router may help, but it won’t necessarily provide coverage behind every obstacle.
Make a note of the workspaces with poor coverage. First see whether repositioning the router or adding a wired access point is possible, then compare mesh setups.
-
Confusing a mesh system with a single access point
A mesh system may include several nodes, while a standalone router or access point is a single device. The number of nodes and how they connect affect where you can place them.
Check exactly what’s included in the box, which connections are available and whether the nodes can be linked by cable.
Brands to consider
TP-Link
TP-Link describes the Deco X50 as a Wi-Fi 6 mesh range available with one, two or three nodes. It may be worth considering if you need Wi-Fi in several areas of your loft.
- TP-Link lists three gigabit ports per Deco X50 and app-based setup.
- The stated maximum coverage of a 3-pack is not a measurement of performance in your loft. Check the exact version and its connections.
FRITZ!
FRITZ! describes the FRITZ!Box 4060 as a standalone Wi-Fi 6 router that can connect to an existing cable, DSL or fibre-optic modem and be expanded with mesh.
- According to FRITZ!, the model has one 2.5-gigabit WAN port and three gigabit LAN ports.
- This router won’t necessarily replace every provider modem; check how it connects and which settings are required.
ASUS
ASUS describes the RT-AX86U Pro as a standalone Wi-Fi 6 router with access point mode and AiMesh capabilities. It may suit anyone who wants to manage their own network setup.
- The manufacturer lists a configurable 2.5-gigabit WAN/LAN port.
- Check the specifications and applicable warranty terms for the version on offer.
NETGEAR
NETGEAR describes the Orbi RBK762S as a Wi-Fi 6 mesh system with a router and satellite to provide coverage in multiple areas.
- The manufacturer’s data sheet lists a separate wireless backhaul and gigabit ports.
- Stated coverage and speeds are not measured performance figures for a converted loft. Check the exact system configuration and support.
Products at Joybuy
This selection includes mesh systems with multiple nodes and standalone Wi-Fi routers for a design workspace in a converted loft.
No image available
TP-Link Deco BE68, 2-pack
This mesh system comes with two nodes and is designed to provide Wi-Fi in multiple areas.
The product description lists Wi-Fi 7 and 10, 2.5 and 1-gigabit WAN/LAN ports. It also mentions wired or wireless backhaul.
View at Joybuy
No image available
TP-Link Deco X20 AX1800, 2-pack
This two-node mesh system may be useful if you need Wi-Fi in more than one area of your loft.
The product description lists Wi-Fi 6, gigabit Ethernet ports and the option of Ethernet backhaul. Setup and management via the Deco app are also mentioned.
View at Joybuy
No image available
TP-Link Deco X50, 3-pack
Three mesh nodes may suit a loft where you need Wi-Fi in several areas.
The product title lists Wi-Fi 6 and dual-band 2.4 GHz/5 GHz. According to the product description, each unit has three gigabit Ethernet ports.
View at Joybuy
No image available
ASUS RT-AX52 Pro AX3000
A standalone router may suit you if you want to set up a single Wi-Fi point and consider expanding later.
The product description lists Wi-Fi 6, gigabit connections and AiMesh support for expansion with compatible routers.
View at Joybuy
No image available
TP-Link Deco XE75 Pro, 3-pack
This three-node mesh system may be worth considering if you want to extend Wi-Fi to several areas.
The product title lists tri-band Wi-Fi 6E on 2.4 GHz, 5 GHz and 6 GHz. According to the product description, each unit has three gigabit Ethernet ports.
View at Joybuy
Frequently asked questions
How can you tell whether a new router will improve your upload speed?
First, measure your upload speed using a computer connected by network cable. Compare this with a Wi-Fi test at your design workstation. If the wired connection is also slow, look into your connection or broadband plan before choosing a router.
How do you install and maintain your own router?
Check which connection details your provider makes available and which operating mode you need. Then keep the router software up to date using the manufacturer’s app or website; switch on automatic updates if they’re available.
Should you factor in anything besides the router when making your choice?
Check whether you need extra Wi-Fi nodes or cabling, and whether switching to a different internet connection would involve recurring costs. If a fault is covered by the Dutch statutory guarantee, the retailer is responsible for providing a solution at no cost; this guarantee is not automatically limited to any manufacturer’s warranty.
Can you use your own Wi-Fi router in the Netherlands?
According to ACM ConsuWijzer, you’re free to choose your own router, but you should check which connection settings are required. Radio equipment placed on the market in the Netherlands must also meet the applicable European requirements and carry a CE marking. Check the marking on the device being offered.