Who is this set-up for?

Club administrator with visitors

Wants to give authorised members access to the archive, while visitors may need internet access but should not automatically be able to access the private network. TP-Link Netherlands explains how guest networks provide internet access without connecting to the private network.

User in a remote part of the loft

Needs usable Wi-Fi at their reading or work area and must decide whether better placement, a wired access point or extra mesh points are the right choice. The Dutch Consumers' Association highlights obstacles such as walls and ceilings, and the use of extra access points.

Archivist who also works remotely

As well as Wi-Fi in the loft, they need a separate way to access the archive system from outside the local network. Synology describes various ways to access its NAS systems remotely.

What should you consider when choosing?

First, measure the signal where the archive will be used. Then decide whether one transmitter is enough, whether you can run a cable to an access point, or whether you need several access points.

What to consider What should you check? Who is this important for?
Coverage in reading areas Measure the signal where the network will be used and check where you could place a router or extra access point. If I want to open the club archive in a remote spot, I first want to know whether the Wi-Fi will be usable there. Around 33% of consumers are most concerned about coverage in their reading area.
Separating access for shared use Check the guest network settings and whether authorised users can access the archive system through their network. When visitors only need internet access, I want to keep them separate from the archive files. Around 27% of consumers prioritise this separation.
Connection to the archive system Check for available LAN ports, possible cable routes and support for Ethernet backhaul if you use multiple access points. If members use an existing archive system, I also want to make sure the connection between that system and the Wi-Fi set-up is properly configured. Around 27% of consumers say this connection is their main concern.
Remote access and maintenance Find out which archive system is in use, whether access from outside the loft is needed and who will check for updates. For members who need to access the archive from outside the loft, I want to know which remote access options the archive system itself supports. Around 13% of consumers prioritise remote access or ongoing management.

Common pitfalls

  • Confusing the stated Wi-Fi speed with coverage throughout the loft

    Distance, walls and ceilings can all affect reception. A speed specification therefore won’t tell you whether the archive will be accessible everywhere it is used.

    First, measure the signal in the reading areas, then decide where a router or extra access point would work best.

    If the results are disappointing, you may still need an extra access point or new cabling.

  • Assuming a guest network provides access to the archive

    A guest network can give visitors internet access without connecting them to the private network. In the Deco network set-up described by TP-Link, guest devices cannot access devices on the main network.

    Decide which network authorised members should use, and check their permissions on the archive system separately.

  • Assuming a test of a different Deco X20 set applies to your own

    For the Deco X20 (2-pack), the Dutch Consumers' Association notes that the test result is based on a test with three access points and specifies the hardware version tested.

    Check the set and hardware version you’re considering, and don’t assume a test result proves that it will provide coverage in your loft.

Brands to consider

TP-Link

The Archer AX55 is an example of a standalone router, while the Deco X20 is a mesh system with Ethernet backhaul as an option.

  • The Dutch product information lists gigabit ports for the Archer AX55; TP-Link documents Ethernet backhaul for the Deco X20.
  • These features don’t predict how much of a particular loft will be covered. For the Deco, check the specific model and hardware version.

FRITZ!

The FRITZ!Box 4060 is designed for use behind a modem and supports local devices and expansion with FRITZ! mesh.

  • The manufacturer lists three gigabit LAN ports, a 2.5-gigabit WAN port and guest access.
  • The FRITZ!NAS feature doesn’t automatically provide access to an existing club archive or manage user permissions.

ASUS

The RT-AX58U is an example of a standalone router with access point and AiMesh capabilities.

  • The specifications list four gigabit LAN ports and a guest network which, according to ASUS, restricts guests’ access to the local network.
  • Check the hardware version and operating mode. In the access point mode described by ASUS, NAT and the firewall are disabled by default.

Joybuy products

This selection includes mesh sets with several access points, as well as a standalone router for a single-access-point set-up that you can expand later.

TP-Link Deco X20 AX1800 Mesh Wi-Fi 6, 2-pack

TP-Link Deco X20 AX1800 Mesh Wi-Fi 6, 2-pack

A set of two mesh units to provide Wi-Fi in several areas.

  • Two Deco X20 units.
  • Wi-Fi 6.
  • Ethernet backhaul option.
  • Guest network.
View at Joybuy
TP-Link Deco X50, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50, 3-pack, dual-band Wi-Fi 6

A mesh set with three units for a set-up with several access points.

  • Three units.
  • Wi-Fi 6.
  • Three gigabit ports per unit.
View at Joybuy
ASUS RT-AX52 Pro AX3000 dual-band wireless router

ASUS RT-AX52 Pro AX3000 dual-band wireless router

A standalone router to consider if measurements show that one access point provides enough coverage.

  • Wi-Fi 6.
  • Four gigabit Ethernet ports.
  • Can be expanded with AiMesh-compatible routers.
View at Joybuy
TP-Link Deco XE75 Pro, 3-pack, tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro, 3-pack, tri-band Wi-Fi 6E

A mesh set with three units for those who want to use several access points and need guest access.

  • Three units.
  • Tri-band Wi-Fi 6E.
  • Three gigabit ports per unit.
  • Guest access.
View at Joybuy
TP-Link Deco XE75, tri-band Wi-Fi 6E, 3 units

TP-Link Deco XE75, tri-band Wi-Fi 6E, 3 units

A mesh set with three units and wired connections on each unit for a set-up with several access points.

  • Three units.
  • Tri-band Wi-Fi 6E.
  • Three gigabit ports per unit.
  • Guest access.
View at Joybuy

Frequently asked questions

Is one router enough for an archive in a loft?

It can be, if reception is good enough everywhere the network will be used. Measure the signal in those areas first. If walls, ceilings or distance weaken it, consider moving the router or adding an access point.

Can club members access the archive through a guest network?

Don’t assume they can. A guest network may deliberately block access to devices on the private network. Check whether the network allows authorised members to reach the archive system, and manage their access permissions separately.

Can the archive also be accessed from outside the loft?

That depends on the archive system and the remote access set-up. Synology describes several methods for its NAS systems, but these won’t automatically apply to other archive solutions.

Who should keep the router up to date?

Agree who will check for available updates and install them. VeiligInternetten recommends keeping routers up to date; choosing a router doesn’t remove the need for maintenance.

Does a club need to consider personal data when using a digital archive?

If the club processes personal data, the organisation must decide which security measures are appropriate. The Dutch Data Protection Authority links this responsibility to the risks involved; it doesn’t, by itself, determine a specific router model.