Who is this choice relevant to?

Maker with a cellar workspace

You upload design files from a single room in the cellar and want a reliable connection there. The cable route, and the difference between wired upload and Wi-Fi at your workspace, will affect your choice.

Resident with Wi-Fi problems on several floors

You need coverage not just in the cellar but in other rooms too. Consider where additional nodes could go and whether you can connect them via Ethernet.

Home worker with slow file uploads

You want to find out whether the limitation is with your Wi-Fi or your fixed broadband connection, so you can choose network equipment that tackles the actual bottleneck.

What should you look for when buying?

Wired access point in the cellar

Best if: you can run an Ethernet cable to the cellar and need Wi-Fi there.

Bear in mind: the cable route and, for a PoE access point, a suitable power supply.

Mesh system with multiple nodes

Best if: you want to improve Wi-Fi in other rooms as well as the cellar.

Bear in mind: wireless nodes still need a usable signal between them; Ethernet backhaul requires cabling.

One wired repeater

Best if: you need Wi-Fi in one additional spot and can connect the device to your existing router with a LAN cable.

Bear in mind: check that the repeater supports the bridge or access point mode you need.

Replace the main router only

Consider this if: Wi-Fi is also poor close to your current router, even though your wired broadband connection is good.

Bear in mind: a new router does not guarantee coverage through walls or floors; replacing it may also require configuration.

Investigate your broadband connection

Do this first if: repeated wired speed tests at your connection fall short of what your contract promises.

Bear in mind: a faster broadband package will not automatically fix poor Wi-Fi coverage in the cellar.

For uploading design files from a cellar, first identify the upload bottleneck. Then the cable route and the number of rooms that need Wi-Fi will help you decide which set-up is right.

What to consider What should you check? Who is this especially important for?
Wi-Fi in the cellar Take a measurement at your workspace; check whether Ethernet is possible there or where a wireless node would still have a good connection. If I upload design files from one room in the cellar, I want to know whether Wi-Fi reaches it or whether I can run a cable to an additional node. Around 36% of consumers prioritise coverage at their workspace.
Upload bottleneck Compare repeated wired measurements at your connection with Wi-Fi measurements in the cellar and the upload speed stated in your contract. If my upload is slow, I first want to know whether the fixed connection could be the cause. Around 29% of consumers prioritise identifying the upload bottleneck.
Cables and connections Check the cable route, available LAN ports and the power supply or PoE required. I don't want to choose a device that isn't suitable for my cable route, connections or power supply. Installation requirements are the deciding purchase concern for around 21% of consumers.
Purchase and maintenance Check how many Wi-Fi nodes and accessories your set-up requires, and find out how to update the equipment. If I want to know in advance what equipment and management I'll need, the complete set-up matters. Around 14% of consumers prioritise purchase and maintenance.

Consumentenbond recommends testing your internet speed over a network cable. ACM ConsuWijzer lists the minimum and normally available upload speeds for fixed broadband connections as contract details you can use for comparison.

Common buying mistakes

  • Focusing only on the Wi-Fi speed rating

    A stated speed does not tell you how the connection will perform through floors and walls at your cellar workspace.

    Compare a wired measurement at your connection with measurements where you work, then assess the options for adding another node.

  • Putting a wireless mesh node somewhere with no signal

    A wirelessly connected node needs a usable connection to the network itself; placing it in the cellar will not magically fix a weak signal.

    Check the signal at the intended position or find out whether Ethernet backhaul is possible.

  • Treating an access point as a complete router

    The UniFi U6+ is an access point and does not, by itself, replace the router that connects your network to the internet.

    Decide in advance which device will remain as your router and how the access point will receive its network connection and power.

  • Confusing a manufacturer's warranty with your statutory rights

    According to ACM ConsuWijzer, Dutch law does not set a general fixed statutory warranty period of two years.

    Keep your proof of purchase and contact the retailer if there is a problem with a product; a manufacturer's warranty is not the same as your statutory rights.

Brands to consider

TP-Link

The Deco X50 range is a mesh option for coverage in multiple places, including a cellar workspace.

  • TP-Link lists three gigabit ports per node for the standard Deco X50, with optional Ethernet backhaul.
  • The Deco X50-PoE is a different model, with PoE and two 2.5 Gbps ports; don't confuse the two. Stated speeds and coverage areas are not measurements of your cellar.

FRITZ!

The FRITZ!Repeater 1200 AX is an extension node for anyone who wants to keep their existing router and add Wi-Fi in one place.

  • FRITZ! describes a LAN bridge behind a router from another brand.
  • Assess the signal for a wireless connection and compatibility with your own router separately.

Ubiquiti

The UniFi U6+ is a standalone access point for a set-up where you can run Ethernet to the cellar and keep your existing router.

  • Ubiquiti lists one GbE network connection and PoE power for the U6+.
  • The access point does not replace the main router; check the power supply and management requirements in advance.

ASUS

According to ASUS, the RP-AX58 can be used as a repeater or access point; AiMesh is designed for compatible ASUS devices.

  • ASUS describes an Ethernet connection when the RP-AX58 is used as an access point or AiMesh node.
  • Wi-Fi 6 requires a compatible client device; stated coverage and speed figures are not measurements of your cellar.

NETGEAR

Orbi is NETGEAR's range of mesh systems for anyone looking for coverage in several rooms.

  • The Orbi product range is designed to provide Wi-Fi coverage throughout the home.
  • For a specific model, check how many nodes you need, the connections available and how the nodes connect to each other; the product range alone does not tell you how it will perform in your cellar.

Joybuy product picks

This selection includes wired access points and mesh systems with multiple nodes. A wired access point is a good fit if you can run a cable to the cellar; mesh may suit you if you need Wi-Fi in more places.

Ubiquiti UniFi AP U7 Long-Range access point

Ubiquiti UniFi AP U7 Long-Range

A wired access point for a set-up where you keep your existing router and can run an Ethernet connection to the cellar.

Wi-Fi 7 access point with a 2.5 GbE uplink. Requires PoE+ (802.3at); UniFi Network management is listed.

View at Joybuy
TP-Link Deco X50 mesh system with 3 nodes, Dual-Band, Wi-Fi 6

TP-Link Deco X50 (3-Pack) Dual-Band Wi-Fi 6

A mesh system with three nodes for a home that needs Wi-Fi in several places.

Wi-Fi 6; three gigabit ports per node and optional Ethernet backhaul, according to TP-Link. This is the standard X50 model, not the X50-PoE.

View at Joybuy
TP-Link Omada EAP653 Wi-Fi access point

TP-Link Omada EAP653

An access point for a permanent additional Wi-Fi spot, if you can run an Ethernet cable to that location.

Wi-Fi 6, gigabit Ethernet port and PoE. Ceiling or wall mounting is listed; check that you have a suitable PoE power supply.

View at Joybuy
TP-Link Deco XE75 Pro mesh system with 3 nodes, Tri-Band, Wi-Fi 6E

TP-Link Deco XE75 Pro (3-Pack) Tri-Band Wi-Fi 6E

A mesh system with three nodes for anyone who needs Wi-Fi in several places around the home.

Tri-band Wi-Fi 6E with 2.4 GHz, 5 GHz and 6 GHz bands. Ethernet ports per node are listed; check which connections your set-up requires.

View at Joybuy
TP-Link Deco X50-PoE mesh system with 3 nodes, Wi-Fi 6

TP-Link Deco X50-PoE (3-Pack) Wi-Fi 6

A mesh system with three nodes for Wi-Fi in several places, with PoE as one of the installation options.

Wi-Fi 6, PoE support and two Ethernet ports per node. This is the X50-PoE model, not the standard Deco X50.

View at Joybuy

Frequently asked questions

How can you tell whether you need a new router or a solution in the cellar?

Compare several upload speed tests using a network cable at your broadband connection with Wi-Fi measurements at your cellar workspace. If the Wi-Fi connection is particularly weak, look at repositioning your equipment or adding another node. If your wired upload is also slow, compare it with your contract and discuss any persistent difference with your provider.

Can you connect an additional Wi-Fi node to your current router?

Yes, provided the device and connections support the set-up you want. FRITZ!, for example, describes a LAN bridge behind a router from another brand. If you want to replace your provider's equipment, check separately which connection settings are required.

What maintenance should you do after installation?

Keep your network equipment's software up to date. ACM ConsuWijzer mentions updates when using your own equipment; after installation, test the upload speed again at your cellar workspace.

What extra equipment and warranty rights should you check?

Check whether your set-up needs a cable, an additional Wi-Fi node or a suitable PoE power supply. ACM ConsuWijzer explains that Dutch law does not set a general fixed two-year period for the statutory guarantee; your statutory rights and a manufacturer's warranty are not the same thing.

Can you use your own Wi-Fi router in the Netherlands, and do you need a licence for Wi-Fi?

ACM ConsuWijzer says you can choose your own modem or router, provided it meets the applicable network and safety requirements. The Dutch Authority for Digital Infrastructure states that Wi-Fi can be used without a licence, subject to the applicable conditions, and without any notification or registration requirement. Radio equipment placed on the EU market must also meet the applicable conformity requirements; manufacturers affix a CE mark when those requirements are met.