Who is this guide for?

Designer with a weak connection in one room

If you upload design files from a room with weak Wi-Fi, compare the connection in your workspace with a wired test at the router. The Dutch Consumers’ Association recommends using a wired connection for a speed test.

Resident on a busy shared network

When housemates are online at the same time, bear in mind that your Wi-Fi connection and your internet package’s upload speed are separate things. A repeater won’t increase your package’s capacity.

Resident who doesn’t manage the network

If you can’t change the router settings or aren’t allowed to run a cable yourself, check in advance which installation options and mesh features are compatible with the existing router. Agree any changes with the network administrator.

What should you look for when uploading over shared Wi-Fi?

First, find out where the connection is falling short. Comparing a wired upload test at the router with Wi-Fi in your workspace will help you work out whether the range, cabling or internet connection needs further investigation.

What to consider What should you check? Who is this important for?
Uploading from your workspace Compare a wired upload test at the router with Wi-Fi in your workspace, preferably at busy times too. If I need to send design files from my room, I want to know whether Wi-Fi is the limiting factor; around 33% of consumers put reliable file uploads first.
Simultaneous use Check the Wi-Fi versions supported by the router and devices, and see whether a cable can be used for the backhaul connection. If my housemates are online at the same time, I want to know which connections share capacity; around 27% of consumers prioritise capacity for simultaneous users.
Range and placement Choose an intermediate spot where the repeater still gets a good signal from the router, and check the connection there. If my room has poor coverage, I’m looking for a spot that can reach both the router and my workspace; around 20% of consumers put range and placement first.
Router and permission Check the router model, the requirements of the mesh feature you want and whether you have permission to install or run cabling. If I don’t manage my housemates’ router, I want to know which installations are allowed and which features work together; around 13% of consumers put compatibility and network management first.
Purchase and running costs Check whether a cable is needed, what installation involves and the power consumption of the exact model. If I want to keep the cost of an extra Wi-Fi point under control, I consider the purchase price, electricity and any cabling; around 7% of consumers put these costs first.

Common buying mistakes

  • Confusing Wi-Fi speed with upload speed

    A stated Wi-Fi speed doesn’t measure how quickly your design file is sent over the internet. If the wired upload at the router is also too slow, a repeater won’t fix the bottleneck.

    First, test the connection via cable at the router, then in your workspace, preferably at similarly busy times.

    This could save you an unnecessary purchase if the internet connection or wired connection is the limiting factor.

  • Putting the repeater where the signal is weakest

    A wireless repeater needs a usable connection to the router, so a spot with virtually no router signal isn’t an obvious choice.

    Try an intermediate spot with a power socket. If a cable is possible and permitted, compare a wired connection using access point mode.

  • Confusing general router compatibility with mesh compatibility

    A device may work with a router as a standard repeater, while a brand-specific mesh feature may have additional requirements.

    Check the exact router model and the requirements for the mesh feature you want to use.

Relevant brands to compare

TP-Link

According to TP-Link Netherlands’ product specifications, the RE705X is a Wi-Fi 6 repeater with a Gigabit Ethernet port and access point mode.

  • Wired access point mode is an option if you can run Ethernet to the spot you need.
  • OneMesh requires a compatible OneMesh router. Stated wireless speeds are not measured upload speeds.

FRITZ!

The FRITZ!Repeater 1200 AX may be a good fit if you already have a FRITZ!Box and want to use its mesh features.

  • FRITZ! lists a Gigabit LAN connection and LAN use with a FRITZ!Box; use with other routers is also mentioned.
  • Automatic transfer of Wi-Fi settings applies when used with a FRITZ!Box, not with every router.

ASUS

The RP-AX58 is a Wi-Fi 6 repeater for anyone who wants to check compatibility with ASUS AiMesh.

  • ASUS lists AiMesh support and compatibility with almost any Wi-Fi router.
  • A router from another brand won’t automatically support AiMesh. The stated specifications are not an independent upload speed test.

NETGEAR

The EAX15 is a Wi-Fi 6 model for extending an existing network wirelessly.

  • NETGEAR lists a Gigabit Ethernet port and the option to use the existing network name.
  • A stated maximum Wi-Fi speed doesn’t guarantee the speed at which a file will upload over the internet.

devolo

According to devolo, the WiFi 6 Repeater 3000 can be used in both repeater and access point mode.

  • The manufacturer lists a Gigabit LAN connection and access point mode, allowing for a wired set-up.
  • The mesh feature is described as working with other compatible devolo products. The stated speed is not a measured upload speed.

Products for extending your Wi-Fi

These products include wired access points and a wireless repeater. Before buying, check that the installation will work with your network. The Dutch Authority for Digital Infrastructure states that radio equipment must meet the applicable product requirements and carry the correct CE marking.

Ubiquiti UniFi AP U7 Long-Range access point

Ubiquiti UniFi AP U7 Long-Range

An access point for extending a network over a wired connection. Check whether managing it through the UniFi Network platform suits your set-up.

Wi-Fi 7 and a 2.5-Gigabit Ethernet uplink. The specified power supply requires compatible PoE+ (802.3at) equipment.

Joybuy
WiFi Repeater Pro Black

Wifi Repeater Pro Black

A wireless repeater for extending an existing Wi-Fi network. Place it where it can still get a good signal from the router.

The product description lists 2.4 GHz and a stated speed of up to 300 Mbps. This is not a measured upload speed.

Joybuy
TP-Link EAP725-Wall, 5012 Mbit/s, white, with Power over Ethernet

TP-Link EAP725-Wall, 5012 Mbit/s, white, PoE

A wired access point for extending your network if wall or ceiling mounting is an option.

The product description lists Wi-Fi 7, PoE and three Ethernet ports, including 2.5G support. The stated installation uses PoE.

Joybuy
TP-Link TL-WA801N access point and Wi-Fi extender

TP-Link TL-WA801N

This access point also offers range extender mode. Check which mode and connection are right for the location you have in mind.

The specifications list 2.4 GHz, up to 300 Mbit/s, two antennas, WPS and Passive PoE. The stated speed is not a measured upload performance.

Joybuy

Frequently asked questions

Will a Wi-Fi booster help if uploads are slow even next to the router?

Not necessarily: a repeater won’t increase the upload speed of your internet package. Compare a wired test at the router with Wi-Fi in your workspace. The Dutch Consumers’ Association recommends a wired connection for a speed test.

Where should you place a wireless repeater?

Place it somewhere it can still get a good signal from the router and reach the room with poor coverage. Test the connection in your workspace; distance and obstacles can weaken the router signal.

Will every mesh feature work with your housemates’ router?

No. Check the requirements of the specific mesh feature. TP-Link requires a OneMesh router for OneMesh, while FRITZ! describes automatic mesh integration with a FRITZ!Box. Standard repeater use and full mesh integration are not the same thing.

What costs and practical details should you check first?

Check whether you need a cable, whether you’re allowed to connect one and the power consumption of the exact model. Also check which installations and router settings are permitted in your shared house.

Do you need a permit or registration to use a Wi-Fi repeater at home in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, using the designated Wi-Fi frequencies is licence-exempt under the applicable conditions of use, with no notification or registration required. However, the radio equipment itself must meet the applicable product requirements and carry the correct CE marking.