Check the connection where you watch and near the router, ideally while your housemates are using the network as they normally would. A standalone repeater is best suited to one room with weak coverage and a spot in between where the router signal is still good. Choose a wired access point if you can run an Ethernet cable, or consider mesh if several rooms have problems. None of these Wi-Fi solutions will increase the speed of your broadband package.
Who are these solutions for?
Watching in a room with weak coverage
You stream in one room where the signal drops out, even though Wi-Fi works closer to the router. A well-placed repeater is one option to consider; the Consumers' Association recommends placing a booster between the router and the area with weak coverage.
Housemates with problems in several rooms
You use several devices at once and have coverage problems in more than one place. Compare whether you need multiple Wi-Fi points and how they connect to the router.
Watching where you can use a network cable
With permission, you can run a cable to your viewing area and want to check whether an access point can connect to the router by wire. To do this, check that the model you choose supports access point mode.
What should you look for when choosing?
One wireless repeater
Choose this when: coverage is poor mainly in one room where you watch, and there is a spot between the router and the room with a strong enough signal.
Consider: the connection between the repeater and the router is still crucial; a repeater placed in a dead zone cannot restore that connection.
Wired access point
Choose this when: you have permission to run an Ethernet cable from the router to the room.
Consider: running the cable takes planning and agreement with your housemates or network administrator; check the access point mode and the port you need.
Multiple mesh Wi-Fi points
Choose this when: several rooms or floors have coverage problems and one Wi-Fi point is not enough.
Consider: additional points require equipment, power and installation; check that the mesh feature works with your existing router.
Check the connection first
Choose this when: streaming also stutters close to the router, or the connection is poor in several places.
Consider: testing takes time, but it can help you avoid buying Wi-Fi equipment when the internet connection itself needs attention.
Test where you watch and closer to the router, including while the network is being used as usual. The right solution mainly depends on where the signal is weak and whether you can use a cable.
| Concern |
What should you check? |
Who is this important for? |
| Coverage where you watch |
Find a spot in between with a usable router signal, then test streaming in the room. |
If you mainly watch in one room, you’ll want to know whether a repeater still has a connection halfway there. Around 33% of consumers prioritise coverage where they watch. |
| Using the network at the same time |
Test during normal network use and check whether the problem also occurs close to the router. |
If your housemates are online at the same time, you’ll want to check whether your stream stays stable. Handling simultaneous use is also a priority for around 33% of consumers. |
| Wired connection |
Check whether you’re allowed to run a cable and whether the device has access point mode and the Ethernet port you need. |
If you have a cable running to where you watch, you’ll want to know whether you can use it to connect to the router. Around 17% of consumers prioritise a wired connection. |
| Router and network management |
Check the router model, mesh compatibility and settings with your network administrator. |
If the network is shared, you’ll want to know in advance whether an extension will work with the existing router and fit in with any arrangements. Router compatibility and management are the main concerns for around 17% of consumers. |
Common buying mistakes
-
Buying an extender to fix a broadband connection problem
Wi-Fi coverage at home and your internet connection are separate links in the chain. If streaming also stutters close to the router, extra Wi-Fi equipment may not solve the underlying problem.
Compare the connection in several places. If it remains slow everywhere, investigate your broadband connection or contact your provider.
An extra device uses electricity, adding to your costs even if it does not fix the cause of the interruptions.
-
Putting the repeater in a room with no router signal
A repeater also needs a usable connection to the router. A strong signal to your TV cannot make up for a weak connection back to the router.
Place the repeater somewhere in between where the signal is good, then test the connection where you watch.
-
Assuming mesh will work with every router
TP-Link OneMesh and ASUS AiMesh are designed for compatible combinations of devices. A device can extend a network without automatically joining the same mesh features.
Before buying, check your router model, the specific version and the mesh feature it supports. You may need different equipment if your existing router is not compatible.
Brands to compare
TP-Link
The RE605X and RE705X are standalone Wi-Fi 6 extenders for extending an existing network.
- TP-Link lists a gigabit port and access point mode for the RE605X.
- According to TP-Link, OneMesh requires a compatible OneMesh router. Stated radio speeds are not a measure of streaming performance in a shared home.
FRITZ!
The FRITZ!Repeater 1200 AX is worth comparing if you already have a FRITZ!Box.
- FRITZ! describes a gigabit LAN connection for a wired device and a LAN connection to the router.
- The integrated mesh features described are for compatible FRITZ! devices; using the repeater with another router is not the same as having those mesh features work together.
ASUS
According to ASUS, the RP-AX58 combines coverage extension with AiMesh when used with a compatible ASUS router.
- ASUS also lists compatibility with many other routers and an access point mode.
- AiMesh features require a compatible combination. ASUS also notes regional restrictions on the use of 160MHz channels.
NETGEAR
According to NETGEAR, the EAX15 is a dual-band Wi-Fi 6 extender for expanding an existing network.
- NETGEAR lists a gigabit Ethernet port for a wired device.
- Claims about streaming are not an independent measure of performance in your home.
Joybuy products for these solutions
This selection includes mesh systems for several rooms and standalone repeaters or access points for extending coverage in one place or over a cable.
Image unavailable
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System (2-pack)
A mesh system with two units for using Wi-Fi in several parts of your home.
Wi-Fi 6 and mesh. The product description states that it supports more than 150 devices.
View at Joybuy
Image unavailable
TP-Link Deco XE75 tri-band mesh Wi-Fi system (3 units)
A mesh system with three units for spreading Wi-Fi across several parts of your home.
Tri-band with 2.4, 5 and 6 GHz; the product description lists three gigabit ports per unit.
View at Joybuy
Image unavailable
TP-Link Deco X50 dual-band mesh Wi-Fi system (2-pack)
A mesh system with two units for extending Wi-Fi to several parts of your home.
Wi-Fi 6 with 2.4 and 5 GHz; the product description lists three gigabit ports per unit, as well as OFDMA and MU-MIMO.
View at Joybuy
Image unavailable
Wifi Repeater Pro Black
A standalone repeater for extending an existing wireless network, for example towards one room where you watch.
The description lists two external antennas, an indicator light and WPA-PSK/WPA2-PSK security. The Wi-Fi band described is 2.4 GHz; 5 GHz is not supported.
View at Joybuy
Image unavailable
TP-Link TL-WA801N access point and Wi-Fi extender
An access point to consider if you have permission to run an Ethernet cable to where you watch; the description also lists a range extender mode.
The product name lists speeds of up to 300 Mbps, two antennas, WPS and passive PoE. The Wi-Fi band described is 2.4 GHz; 5 GHz is not supported.
View at Joybuy
Frequently asked questions
How can you tell whether a Wi-Fi booster will help with streaming?
Compare the speed and stability where you watch with the connection closer to the router, including when your housemates are using the network. Netflix recommends 5 Mbps for Full HD and 15 Mbps for 4K UHD on its own service with a stable connection. These are not requirements for every streaming service, and they do not guarantee that a repeater will make your broadband connection faster.
Where should you put a wireless repeater?
Place it between the router and the room with weak coverage, somewhere the repeater can still receive a good signal. If possible, use the signal indicator or setup app, then test the connection where you watch.
What running costs should you expect on top of the purchase price?
Every additional Wi-Fi point uses electricity; with several points, the power consumption of each device adds up. The Consumers' Association includes energy use in its tests. Compare the stated power consumption of the model you choose with how long you use it.
Do you need a licence to use Wi-Fi at home in the Netherlands?
According to the Dutch Authority for Digital Infrastructure, ordinary Wi-Fi use on the applicable licence-exempt frequencies is possible without a licence, notification or registration, provided you comply with the conditions of use. Use the correct country and frequency settings; this does not replace the product requirements for radio equipment.
What should you check when buying a Wi-Fi booster?
Check the CE marking on the specific model being offered in the Netherlands. The Dutch Authority for Digital Infrastructure states that CE marking is mandatory for equipment that meets the applicable European requirements; the model name alone does not tell you whether the version on offer meets them.