What should you look for when choosing?
One wireless repeater
Choose this if: only your study has poor coverage and there’s a spot between the router and the room with good reception.
The trade-off: you don’t need a network cable, but the repeater itself needs to receive a usable signal from the router.
Wired access point
Choose this if: you can run a network cable to or near your study.
The trade-off: check that the device supports the right access point mode; an Ethernet port for a laptop doesn’t prove that it does.
Mesh with multiple points
Choose this if: several rooms or floors have poor coverage, or you already use compatible points from the same system.
The trade-off: you’ll be using several devices, and mesh features depend on the combination of router and points.
For a live lecture, what matters most is the connection where you watch. So compare coverage, the option of a wired connection and compatibility with your existing router.
| What to consider |
What to check before buying |
Who should pay particular attention? |
| Coverage where you watch |
For wireless placement, choose a spot between the router and study where Wi-Fi reception is still good; then test it in the room. |
I need a usable signal in my regular viewing spot to follow the lecture; around 36% of consumers prioritise coverage there. |
| Wired connection |
Check whether you can run a cable to your study and whether the device can work as an access point. |
If I want to avoid a wireless link in the middle during a live lecture, I check whether running a cable is practical; around 29% of consumers prioritise a wired connection. |
| Router compatibility |
Make a note of your router model and check standard repeater operation and mesh requirements separately. |
If I’m extending coverage to more rooms, I want to know whether my router and extra points work together; around 21% of consumers give more weight to compatibility and expandability. |
| Costs and management |
Compare buying with renting, the number of points you need, installation support and power consumption. |
If I want an easy-to-manage setup and a clear picture of ongoing costs, I compare all the components; around 14% of consumers prioritise costs and management. |
Products at Joybuy
This selection includes standalone wireless repeaters, a device with access point mode and mesh systems with multiple points. The right option for you depends in part on how many rooms have poor coverage and whether you can run a network cable.
No image available
Wifi Repeater Pro Black
A wireless repeater for extending an existing Wi-Fi network; place it somewhere it can still receive a usable signal.
2,4 GHz; stated maximum speed: 300 Mbps.
View at Joybuy
No image available
TP-Link Omada EAP673-Extender
A network repeater for extending an existing Wi-Fi connection; check that you place it within range of that network.
Dual-band 2,4/5 GHz; QoS; connection speeds listed as 10, 100 and 1000 Mbit/s.
View at Joybuy
No image available
TP-Link TL-WA801N
An option to consider if you need an access point or Wi-Fi extender; check which mode suits your connection.
2,4 GHz; passive PoE; the product information lists access point and range extender modes, two antennas, WPS and up to 300 Mbps.
View at Joybuy
No image available
TP-Link Deco BE68 2-Pack
A mesh system with two units for extending coverage to several areas; this isn’t a standalone repeater for one room.
The product information lists wired and wireless backhaul and three network ports per unit.
View at Joybuy
No image available
TP-Link Deco E4 3-pack
A mesh system with three units for use in several rooms; check whether you need multiple points rather than a standalone repeater.
Dual-band 2,4/5 GHz; Wi-Fi 5 (802.11ac); the product information lists Ethernet ports and management through the Deco app.
View at Joybuy
Frequently asked questions
Where should I place a wireless booster?
Don’t automatically put the booster in the study with the poorest reception. The Consumers' Association recommends placing it where the router signal is still good, between the router and the room; then check the result where you watch.
Is an Ethernet port on a repeater the same as a wired access point?
No. You can connect a laptop to the repeater by cable while the repeater itself communicates with the router wirelessly. For a wired connection back to the router, the device needs to support a suitable access point or LAN bridge configuration.
Will mesh work with my existing router?
That depends on the combination of devices and the specific mesh features. Check the compatibility requirements for your router model; standard repeater operation doesn’t automatically mean that the system’s mesh features will be available.
Should I budget for costs after buying?
Yes. Compare buying with renting, how many points you need and the electricity costs of running them continuously. For provider-supplied points, terms and costs depend on the plan and subscription you choose.
Do I need a licence for ordinary home Wi-Fi in the Netherlands?
According to the Digital Infrastructure Inspectorate, Wi-Fi can be used in the Netherlands without a licence, notification or registration, provided the applicable conditions are met. This is separate from the product requirements for radio equipment placed on the Dutch market, including the requirement for the correct CE marking; check this for the specific device.