Who is this relevant to?

Someone with a room that has no coverage

You want to get online in the room on the other side of the kitchen. First, check the reception there and see whether moving your router or adding another Wi-Fi point is necessary. The Consumers’ Association recommends assessing Wi-Fi reception and the connection over a network cable separately.

Someone working from home with an unreliable connection

You need a stable connection in the second room, for example for video calls. If you can run a cable to that room, consider a wired access point or a mesh unit with ethernet backhaul. The Consumers’ Association describes both Wi-Fi and cable tests; Ubiquiti lists an ethernet uplink and PoE power for the U6+.

Someone who wants to keep their provider’s router

You want to extend your Wi-Fi without replacing your existing router. Check how the additional system connects and which features remain available in the operating mode you choose. The ACM explains that you can choose your own router; TP-Link notes that some Deco app features are unavailable in access point mode.

What should you consider when choosing?

Start by testing your internet connection over a cable, then check the Wi-Fi in both rooms and in any potential locations for an additional unit.

What to consider What to look for when buying Who is this important to?
Coverage beyond the kitchen Test reception in both rooms and where you plan to put an additional unit. Assess the actual route, not just the stated coverage area. If I need internet in the room beyond the kitchen, I want to know whether an additional unit will itself have a usable connection there. Around 42% of consumers prioritise coverage beyond the kitchen.
A stable connection Compare the wired internet connection with Wi-Fi in the rooms concerned; check that a cable, ethernet port and power supply are available. For video calls or other simultaneous use, I want a stable connection where I work. Around 33% of consumers give stability top priority.
Keeping your existing router Check access point mode, the connection required and which features remain available in that mode. If I want to keep using my provider’s router, I want to know in advance how the additional system will work with it. Around 25% of consumers prioritise keeping their existing router.

Common buying mistakes

  • Assuming the stated coverage area is guaranteed in your home

    Obstacles and the distance between units affect Wi-Fi. An additional unit will only help if it can itself get a usable connection to the main unit.

    Test your existing coverage and check reception where you want to put an additional access point.

  • Putting a repeater somewhere it can’t get a usable signal

    A wireless repeater first needs to receive the existing signal before it can extend it.

    For its wireless range extenders, TP-Link recommends a position roughly halfway between the router and the room with poor reception. Check that the signal is still strong enough there; if it isn’t, consider running a cable.

  • Choosing a mesh system in access point mode without checking which features change

    According to TP-Link, features including parental controls and port forwarding are unavailable in the Deco app when using Deco in access point mode.

    Decide which device will manage your network and check the features available in the specific operating mode you plan to use.

  • Treating an access point as a complete wireless router package

    According to Ubiquiti, the UniFi U6+ has an ethernet uplink and PoE power, and requires a compatible version of UniFi Network.

    Before buying, check that you can arrange the network cable, PoE power supply and the required management setup.

    A wired installation may also require additional connection equipment and time to set up.

Brands to compare

TP-Link

The Deco X50 is a mesh system for extending coverage across several rooms. Ethernet backhaul is an option if you have cabling available.

  • TP-Link lists three gigabit ports on each Deco X50 unit and support for a wired connection between units.
  • According to TP-Link, some advanced features in the Deco app are unavailable when using Deco in access point mode. The stated range doesn’t tell you how much coverage you’ll get in your home.

ASUS

According to ASUS, the ZenWiFi XD5 can connect wirelessly or via existing ethernet cabling.

  • ASUS lists ethernet backhaul and the option to use one network name or separate names.
  • Compatible devices are required for some Wi-Fi 6 features; according to ASUS, 160 MHz is restricted in some regions. Coverage claims don’t show how well the signal will travel through your kitchen.

Ubiquiti

The UniFi U6+ is a standalone access point for anyone looking to install a wired Wi-Fi point and set up the associated management system.

  • Ubiquiti lists a gigabit ethernet uplink and PoE power for the U6+.
  • Check the power supply, cabling and required version of UniFi Network. This access point isn’t a straightforward wireless router replacement.

FRITZ!

The FRITZ!Repeater 1200 AX is an option for extending an existing network, provided you can plug the repeater in at a suitable location.

  • FRITZ! recommends using a network cable in its instructions when cabling and a suitable LAN port are available.
  • According to FRITZ!, interference can affect a wireless connection. This recommendation isn’t an independent comparison with other solutions.

Joybuy products

This selection of Joybuy products includes mesh systems, an expandable router and a repeater for Wi-Fi across several rooms. Choose based on the cabling available, your existing router and where you need to put the additional Wi-Fi point.

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 system, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 system (2-pack)

Suited to anyone looking to extend Wi-Fi across several rooms with two mesh units; the product description also lists ethernet backhaul as a connection option.

AX1800, Wi-Fi 6, 2-pack.

View at Joybuy
TP-Link Deco M4 (3-pack)

TP-Link Deco M4 (3-pack)

Suited to anyone looking to use several mesh units at home; the product description mentions one network and automatic switching between Deco units.

Wi-Fi 5 (802.11ac), dual-band (2.4 GHz/5 GHz), 3-pack.

View at Joybuy
ASUS RT-AX52 AX1800 AiMesh router

ASUS RT-AX52 AX1800 AiMesh router

Suited to anyone looking for a router they can expand later with other AiMesh-compatible routers; those additional routers aren’t listed as included.

Dual-band Wi-Fi 6, 2.4 GHz/5 GHz, Gigabit Ethernet.

View at Joybuy
TP-Link Deco X50 (3-pack)

TP-Link Deco X50 (3-pack)

Suited to anyone looking for a mesh network with three units; the product description lists ethernet backhaul as an option if you have a cable between the units.

Dual-band (2.4 GHz/5 GHz), Wi-Fi 6 (802.11ax), 3-pack.

View at Joybuy
Wifi Repeater Pro Black

Wifi Repeater Pro Black

Suited to extending an existing Wi-Fi network in a specific area; place the repeater where it can still receive a usable signal from the router.

View at Joybuy

Frequently asked questions

Should you order a faster internet connection first?

Not just because the Wi-Fi is weak in one room. First, test your connection using a computer connected with a network cable, then check the router position and Wi-Fi reception in both rooms. A faster connection won’t fix a weak wireless signal inside your home.

Where should you put a wireless repeater if the kitchen is in the way?

Don’t put it somewhere the router signal is almost completely gone. For its wireless range extenders, TP-Link recommends a position roughly halfway between the router and the room with poor reception. Check reception there; according to TP-Link, things such as metal and microwaves can cause interference.

Can you use a mesh system with your existing provider’s router?

According to TP-Link, a Deco system can be used in access point mode behind an existing router. The existing router will then manage the network, and some features in the Deco app won’t be available. Check the instructions for the specific system and the features you need.

In the Netherlands, do you have to use your provider’s router or register your Wi-Fi?

According to the ACM, you can choose your own router if it meets the applicable network and security requirements; additional connection conditions may apply if you use your own modem. The Dutch Authority for Digital Infrastructure states that Wi-Fi on the designated frequencies and subject to the conditions of use is licence-exempt, with no notification or registration requirement.

What compliance requirements should you check when buying?

The Dutch Authority for Digital Infrastructure states that radio equipment must carry the required CE marking. Check the marking on the specific device and the applicable product version; a general product title doesn’t confirm which marking is on the item you receive.