Working in a space with a cable connection
You want a stable connection in the back room and can run Ethernet to it. An access point or wired mesh node is then worth comparing with simply boosting the main router’s wireless signal.
Start by checking where the Wi-Fi is falling short in the shared workspace and back room, then see whether you can run an Ethernet cable to the back room. If you can, a wired access point or a compatible mesh node with Ethernet backhaul could be a targeted solution. Without a cable, wireless mesh depends on finding a spot where the existing signal is still usable. You don’t necessarily need a new main router: also check the settings, connections and compatibility with your current router.
You want a stable connection in the back room and can run Ethernet to it. An access point or wired mesh node is then worth comparing with simply boosting the main router’s wireless signal.
You want to connect both spaces wirelessly. Pay particular attention to where you can place the additional Wi-Fi point so it can still connect to the existing network.
You want to connect and manage work devices, other users and any guests appropriately. As well as coverage, consider network access and updates.
First, check the connection in both workspaces and whether you can run a cable between them. TP-Link describes Ethernet backhaul as the connection between Deco units via Ethernet. For an additional wireless point, its location and reception of the existing network remain key.
| Requirement | What to look for when buying | Who is this most relevant for? |
|---|---|---|
| Coverage in the back room | Check reception in both workspaces and whether you can run Ethernet to the back room. A wireless point also needs a usable connection to the network. | I want to work at the back of the building too, or connect my hobby devices; around 38% of consumers say coverage and stability are their main priority. |
| Access and security | Check guest access, the security settings available and how updates are managed. | If several people or guests use the network, I want to be able to manage access appropriately; around 23% of consumers say shared access is their main concern. |
| Connection to existing equipment | Check the network mode, mesh compatibility, available Ethernet ports and any power requirements. | I want to keep using my current router and wired devices; around 23% of consumers prioritise compatibility with existing equipment. |
| Installation and everything you’ll need | Compare the number of points required, the cable route and the power supply. For PoE, check that the device and power supply use compatible standards. | I want to know in advance what installation and extra equipment will be needed; around 16% of consumers prioritise the overall installation effort and equipment required. |
The router’s position, obstructions and Wi-Fi channels can all affect the connection. A different router won’t automatically solve a poor placement.
Check reception in both spaces and first try improving the position or settings of your existing router.
You may end up making an extra purchase without improving coverage in the back room.
Stated coverage isn’t a measurement of your rooms. Obstacles and the position of each point affect whether the connection between spaces is usable.
Consider where you can place the points and whether they’ll maintain a connection to each other. Use Ethernet if running a cable is practical.
Depending on the layout, you may need an extra point or still have to run a cable.
According to TP-Link, the TP-Link Deco X50-PoE supports IEEE 802.3at and 802.3bt, but not IEEE 802.3af.
Before buying, check the PoE standard supported by both the Wi-Fi point and the power supply.
You may need a power supply that matches the supported PoE standard.
The Deco X50 range includes options with gigabit ports. The Deco X50-PoE is worth looking into if placement and power via suitable PoE equipment are important to you.
The FRITZ!Repeater 1200 AX is a compact option for extending your network and can be used as an additional access point via LAN.
AiMesh is worth considering if you already have compatible ASUS routers or want to set up a network using them.
NETGEAR describes Orbi as a mesh range for home Wi-Fi. It’s worth comparing if you want to connect spaces wirelessly.
This selection includes mesh kits for multiple rooms and wired Wi-Fi access points. Choose according to whether you can run a cable, the network setup you want and the connections you need.
Image unavailable
A three-unit mesh kit for connecting several spaces wirelessly.
Dual-band (2.4 GHz/5 GHz), Wi-Fi 6 and three gigabit ports per unit.
The product information lists Ethernet backhaul as an option; check the connections required for your chosen network mode.
Image unavailable
A Wi-Fi access point to consider if you can run Ethernet to the room.
The product information lists Wi-Fi 6, PoE, VLAN support and WPA3.
Check that the PoE power supply and network configuration you need are suitable for your setup.
Image unavailable
A three-unit tri-band mesh kit for use across several spaces.
The product information lists 2.4 GHz, 5 GHz and 6 GHz, three Ethernet ports per unit, WPA3, guest access and QoS.
Check that the features and connections are suitable for your existing network and devices.
Image unavailable
A three-unit tri-band mesh kit for connecting several rooms wirelessly.
The product information lists 2.4 GHz, 5 GHz and 6 GHz, Wi-Fi 6E and three gigabit ports per unit.
Check compatibility with your existing network and where you can place the units.
Image unavailable
A Wi-Fi access point to compare if you can run a cable to the room.
The product information lists Wi-Fi 6, one gigabit Ethernet port and WPA3.
Power options include PoE, passive PoE and DC; check which option is right for your installation. Omada SDN management and roaming are also listed.
Not just because coverage in the back room is poor. ACM ConsuWijzer confirms that you’re allowed to choose your own router, but connection and security requirements still apply; ask your provider for the necessary settings if needed. An additional access point is another option.
Check reception in both workspaces and first see whether changing the position or settings of your existing router helps. An additional wireless point still needs a usable connection to the existing network. For a wired point, check the cable route and network mode.
No. According to TP-Link, the Deco X50-PoE supports IEEE 802.3at and 802.3bt, but not IEEE 802.3af. Check the power supply standard and the exact model before choosing your equipment.
For a typical online product purchase, ACM ConsuWijzer says you have a statutory cooling-off period that ends 14 days after delivery, subject to legal exceptions. If a product breaks too soon under normal use, the seller must put it right free of charge, according to information from ACM ConsuWijzer. This is separate from any stated manufacturer’s warranty period.
Radio equipment placed on the market in the Netherlands must meet the applicable European requirements and carry the CE marking. According to the Dutch Authority for Digital Infrastructure, applicable cybersecurity requirements have also been in force since 1 August 2025. Check the specific model and use the correct country setting for Wi-Fi.