Who is this choice relevant to?

Attic worker with a weak signal

You want a reliable connection in your upstairs office and need to decide whether to run a cable or add another Wi-Fi point.

Homeowner without a cable route

You want Wi-Fi coverage in the kitchen too, but can’t run an Ethernet cable to the other floor. Where you place the mesh nodes and how they connect to each other are important considerations.

Buyer who wants to keep their modem

You’re looking for an extension that works with your existing provider’s modem, without replacing your entire internet connection.

What should you look for?

Move or adjust your existing router

Choose this if: tests suggest that the router’s current position or settings are limiting its range.

Bear in mind: moving the router won’t always solve signal loss between floors or through walls.

Wired access point or mesh node

Choose this if: you can run an Ethernet connection to your attic office and want to connect a node there.

Bear in mind: you’ll need a suitable cable route, a spare port and a device with the right connection mode.

Wireless mesh system

Choose this if: running cables isn’t practical and there are suitable spots for a series of nodes.

Bear in mind: the connection between wireless nodes also depends on their position and any obstacles.

One new router

Choose this if: your current router doesn’t meet your needs and tests point to a good spot for a single device.

Bear in mind: a new router on its own won’t guarantee good coverage in both rooms.

Test the connection in both locations and check where an extra node can still get a good signal. The Consumentenbond advises against using the Wi-Fi version as the only measure of performance. If you’re buying equipment sold in the Netherlands, also check that the specific model carries the CE marking; the Dutch Authority for Digital Infrastructure states that this marking is compulsory.

What to consider What should you check? Who is this most relevant to?
Coverage between floors Test in both locations and see where an extra node can still receive a strong enough signal. I want usable Wi-Fi in both the kitchen and attic office, not just beside the modem. Coverage is the top purchasing priority for around 36% of consumers.
Reliable connection for work Check whether you can run Ethernet upstairs and test the connection at your workstation. When I work upstairs, I want a stable connection there, not just a high advertised speed. A reliable connection for work comes first for around 29% of consumers.
Installation without cables Check the connection instructions, available modem ports and whether there are suitable spots for the nodes. I can’t run a cable between floors and want to know whether wireless nodes can still be positioned effectively. Avoiding the need to run new cables is the top priority for around 21% of consumers.
Equipment needed Work out how many nodes you need and how many devices will need a continuous power supply. I don’t want to add extra devices if better placement or settings will do the job. Avoiding unnecessary equipment is the main consideration for around 14% of consumers.

Common purchasing mistakes

  • Assuming the advertised coverage guarantees a signal in the attic

    Floors and other obstacles affect the connection. An advertised coverage area doesn’t automatically show how Wi-Fi will spread through your home.

    First, test Wi-Fi where you use it and check where an extra node can still receive a strong enough signal.

    Poor positioning could mean you still need another node or a cable route.

  • Assuming a different pack size is the same product

    Sets with the same model name may contain different numbers of devices, which affects how you can arrange them between the modem, kitchen and attic.

    Before ordering, check the full model name and how many nodes are included in the box.

  • Assuming Wi-Fi 7 guarantees better coverage

    The Consumentenbond points out that the Wi-Fi version alone doesn’t determine performance. A newer designation doesn’t tell you how well the signal will reach the rooms in your home.

    First compare where the nodes can go, how they connect to each other and which connections you need.

Brands to consider

TP-Link

The Deco X50 is a Wi-Fi 6 mesh option that, according to TP-Link, is available in sets of different sizes.

  • TP-Link lists three Gigabit ports and optional Ethernet backhaul for the Deco X50.
  • The manufacturer’s stated coverage isn’t a measurement taken in your home, so check the pack size and placement.

FRITZ!

According to FRITZ!, the FRITZ!Mesh Wi-Fi Set 1700 is an extension option that can also connect to an existing router.

  • The manufacturer describes connecting via LAN, including to a router from another brand.
  • Connecting it to your existing router doesn’t prove that the signal will remain strong enough between floors. Check the set and connection method.

ASUS

ASUS describes the ZenWiFi BD4 as a dual-band Wi-Fi 7 mesh system with wired backhaul options.

  • According to ASUS, each listed device has two 2.5GbE ports.
  • Wi-Fi 7 or a stated coverage area doesn’t by itself guarantee a good connection between the kitchen and attic.

KPN

KPN SuperWifi is a provider option for extending an existing home network with extra nodes.

  • KPN describes setup and management using a KPN modem and the accompanying app.
  • Setup and features depend on your modem and configuration, so check they’re suitable for your connection.

Wi-Fi products at Joybuy

The products below are mesh sets or systems for extending Wi-Fi between rooms. Choose the number of nodes based on tests in your kitchen and attic, and check which connections you need.

TP-Link AX1800 whole-home mesh Wi-Fi system, Wi-Fi 6, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-Pack

A mesh option for anyone looking to extend Wi-Fi coverage to several areas.

2-pack; AX1800; Wi-Fi 6.

View at Joybuy
TP-Link Deco X50, 3-pack, dual-band, Wi-Fi 6

TP-Link Deco X50 (3-Pack), Dual-Band, Wi-Fi 6 (802.11ax)

An option for anyone looking to use a mesh set with several nodes.

3-pack; dual-band (2.4 GHz/5 GHz); Wi-Fi 6 (802.11ax).

View at Joybuy
Linksys Velop Pro 7, tri-band, Wi-Fi 7

Linksys Velop Pro 7, Tri-Band, Wi-Fi 7 (802.11be)

A mesh option for anyone considering a tri-band system for their home network.

Tri-band (2.4 GHz/5 GHz/6 GHz); Wi-Fi 7 (802.11be).

View at Joybuy
TP-Link Deco X50-PoE, 2-pack, dual-band, Wi-Fi 6

TP-Link Deco X50-PoE (2-Pack), Dual-Band, Wi-Fi 6 (802.11ax)

An option for anyone looking to use two mesh nodes and considering a PoE setup.

2-pack; PoE; dual-band (2.4 GHz/5 GHz); Wi-Fi 6 (802.11ax).

View at Joybuy
TP-Link Deco XE75 Pro, 3-pack, tri-band, Wi-Fi 6E

TP-Link Deco XE75 Pro (3-Pack), Tri-Band, Wi-Fi 6E (802.11ax)

An option for anyone looking to use several mesh nodes across different rooms.

3-pack; tri-band (2.4 GHz/5 GHz/6 GHz); Wi-Fi 6E (802.11ax).

View at Joybuy

Frequently asked questions

Do I need to replace my internet provider’s router?

No, not necessarily. First, try improving its position and settings, or check whether an extra node can connect to your existing router. In the Netherlands, you’re free to choose your router, but your own equipment must be technically suitable and you may need your provider’s settings. ACM ConsuWijzer explains that you can’t simply use any device in every situation.

Where should I place a wireless mesh node for the attic?

Don’t automatically put the node in the room with the weakest signal: it still needs to receive a usable connection itself. Try a spot between the rooms, then check the connection in both the kitchen and your attic office.

How can I keep my Wi-Fi equipment secure and properly configured?

Keep your router and nodes up to date, use a strong Wi-Fi password and follow the country setting in the instructions. The Dutch Authority for Digital Infrastructure warns that an incorrect country setting can result in excessive transmission power and interference.

Do I need a licence to use Wi-Fi at home?

You generally don’t need a licence to use Wi-Fi on the designated frequencies in the Netherlands, as long as you follow the conditions of use. The Dutch Authority for Digital Infrastructure makes clear that this doesn’t give you permission to use arbitrary frequency or country settings.

Does my statutory guarantee end after two years?

No. According to ACM ConsuWijzer, there isn’t a fixed two-year period for the statutory guarantee on every product. What you could reasonably expect from the product and how it has been used are relevant; any manufacturer’s guarantee is separate.