Who is this choice relevant to?

Designer with a poor signal at their workspace

You mainly upload from one floor where the Wi-Fi signal is weak, and want to find out if a well-positioned repeater will do the job. The Consumentenbond advises taking both the connection and the placement into account.

Working across several floors

You move between floors while working and want coverage wherever you upload, so the number of Wi-Fi points and the connection between them both matter. This is in line with the Consumentenbond’s advice and tips for choosing and using a system.

Using an existing router and cabling

You want to keep your current router and may be able to run a network cable to the floor where you work. Check the operating mode and compatibility: TP-Link, FRITZ! and the Consumentenbond all identify these as important considerations.

What should you consider when choosing?

A single wireless repeater

Choose this option: if the signal is poor mainly in one workspace and the repeater itself can still receive a good Wi-Fi signal in a suitable spot between there and the router.

Bear in mind: the wireless connection back to the router and where you place the repeater. The model’s stated speed won’t tell you how fast your uploads will be across your floors.

A wired access point

Choose this option: if there’s a suitable network cable to the floor where you work, or you can install one.

Bear in mind: the cable route, an available connection and the access point’s correct operating mode.

Multiple Wi-Fi points or mesh

Choose this option: if you upload from several floors and one extra point won’t provide coverage in all of them.

Bear in mind: the connection between the points and compatibility. The Consumentenbond’s guide uses two points as a starting point for two floors and three for three floors, not as a guarantee for every home.

Key consideration What should you check? Who is this most important for?
Upload speed in your workspace Compare a speed test using a cable connected to the router with tests in the places where you plan to upload. When I upload large design files, I want to know whether the internet connection itself or the Wi-Fi is the limiting factor. Around 36% of consumers prioritise usable upload speed.
Connection between floors Check whether a wireless point will receive a signal in its planned position and whether a network cable is available. When I work on different floors, I want a connection wherever I upload, without a weak link between Wi-Fi points. Around 29% of consumers put this connection first.
Compatibility with your router Check your router model, the mesh features you want, the access point mode and the connection method. If I want to keep my current router, I want to know in advance which features will work with it. Around 21% of consumers prioritise router compatibility.
Total cost and aftercare Work out how many points you need and whether any cabling is required. Also check update information and warranty terms. When I choose a solution for several floors, I want to consider the number of devices and the practical aftercare. Around 14% of consumers prioritise total cost and aftercare.

Common mistakes when extending Wi-Fi

  • Comparing only the maximum speed on the box

    Your internet speed and the Wi-Fi connection where you upload are separate factors. A model’s stated wireless speed doesn’t measure your upload speed across several floors.

    First, test the connection using a cable at the router, then compare it with the connection in your workspaces, as the Consumentenbond advises.

  • Placing a repeater where there’s hardly any Wi-Fi

    A wireless point between the router and your workspace needs to connect to the rest of the network. Otherwise, the connection to your workspace will still be limited.

    Choose a spot in between where the signal is usable, then test the connection wherever you upload. A wired access point is an alternative if you have a network cable available there.

  • Assuming every mesh system works with every router

    Mesh features can depend on both the router and the system. For example, TP-Link says that OneMesh requires a compatible OneMesh router, and that EasyMesh Ethernet backhaul needs to be supported at both ends.

    Check the documentation for your router model, satellite and preferred operating mode before choosing a combination.

  • Confusing the manufacturer’s warranty with your statutory rights

    The Dutch government explains that the Netherlands has no fixed statutory warranty period. A manufacturer’s warranty and your statutory right to a product that meets expectations are not the same thing.

    Keep your purchase and product information, and contact the seller if something goes wrong.

Brands to consider

TP-Link

The RE605X is a Wi-Fi 6 repeater with a gigabit Ethernet port and access point mode. It’s worth considering if you want to add a single point or can use a network cable.

  • TP-Link says the RE605X can work as a standard extender with an existing router.
  • TP-Link says a compatible OneMesh router is required for OneMesh. Stated wireless speeds are not measured upload speeds across floors.

FRITZ!

The FRITZ!Repeater 1200 AX has a gigabit LAN connection. It’s worth considering if you use a FRITZ!Box or want to install a wired point.

  • FRITZ! describes mesh integration with a FRITZ!Box, as well as use over Wi-Fi or LAN with routers from other brands.
  • With a router from another brand, don’t assume you’ll get the same FRITZ! mesh features.

devolo

The WiFi 6 Repeater 5400 can be placed on its own; devolo also describes using it as an access point when network cabling is available.

  • devolo lists two gigabit LAN ports for this model, along with mesh support for other devolo Wi-Fi products.
  • The maximum wireless speed quoted by devolo doesn’t guarantee a particular upload speed on another floor.

Joybuy products for extending Wi-Fi

This selection includes mesh systems, a repeater and access points for extending Wi-Fi or setting up a wired point. Before buying, check that the model you choose suits your router, connection method and workspace.

TP-Link Deco X50 mesh system, 3-pack, dual-band and Wi-Fi 6

TP-Link Deco X50 (3-pack), dual-band, Wi-Fi 6

A mesh system for extending Wi-Fi to multiple areas of your home.

The product information lists three units and three gigabit Ethernet ports per unit.

View at Joybuy
WiFi Repeater Pro Black

WiFi Repeater Pro Black

A repeater for extending an existing wireless network.

The product information lists 2.4 GHz and the use of multiple extenders.

View at Joybuy
TP-Link Omada EAP653 wireless access point

TP-Link Omada EAP653

An access point for installations where you can run an Ethernet connection to the floor where you work.

The product information lists Wi-Fi 6, one gigabit Ethernet port and Power over Ethernet (PoE).

View at Joybuy
TP-Link TL-WA801N access point and Wi-Fi network extender

TP-Link TL-WA801N access point and Wi-Fi extender

An access point or extender to consider if you’re planning a wired setup. Check which mode suits your configuration.

The product name lists N up to 300 Mbps, two antennas, WPS and Passive PoE.

View at Joybuy
TP-Link Deco XE75 tri-band mesh system with Wi-Fi 6E

TP-Link Deco XE75 tri-band, Wi-Fi 6E

A mesh system for extending Wi-Fi across several floors. Check where you can place the units and how they connect to each other.

The product information lists three units and three gigabit Ethernet ports per unit. The product name lists tri-band support at 2.4 GHz, 5 GHz and 6 GHz.

View at Joybuy

Frequently asked questions

Can a Wi-Fi booster fix slow uploads on my internet plan?

Not if the internet connection itself is the bottleneck. First, test with a computer connected to the router using a network cable, then compare the connection in your workspaces, as the Consumentenbond advises.

Where should I place a wireless repeater?

Put it somewhere it can still get a good signal from the network. Keep obstacles between Wi-Fi points to a minimum, then test the connection wherever you upload. The Consumentenbond stresses the importance of placement.

Is an Ethernet port on the repeater enough for a wired connection between floors?

No. An Ethernet port on its own doesn’t confirm that the repeater is connected to the router by cable. Check whether the model can connect to the router by cable in access point mode. In another mode, the port may be intended for a wired end device.

What are my rights if a Wi-Fi booster bought online doesn’t work properly?

If Dutch consumer law applies to your purchase, you’re entitled to a product that meets expectations and can contact the seller to find a solution. The Dutch government explains that the Netherlands has no fixed statutory warranty period; a manufacturer’s warranty is separate from your statutory rights. When you buy online, you generally have a 14-day cooling-off period, subject to exceptions.

Does a Wi-Fi booster need a CE marking to be sold in the Netherlands?

Radio equipment placed on the market in the Netherlands must meet the relevant European requirements. The Dutch Authority for Digital Infrastructure explains that the manufacturer applies the CE marking once the equipment meets these requirements. Check the marking on the specific model.