Teacher demonstrating brushstrokes
You’ll mainly need a steady overhead view that keeps the artwork and your hands in shot. Check the capture area and focusing distance before you buy.
Choose an adjustable document camera if brushstrokes, hands and the work surface will be the main focus for most of the lesson. Choose a webcam with a desk view if you regularly switch between showing your face and your work. Measure the area you need to show, check the focusing distance, and test the lighting, colour and sound in your own setup. Manufacturer specifications can’t predict how glaze or paint will look under your lighting.
You’ll mainly need a steady overhead view that keeps the artwork and your hands in shot. Check the capture area and focusing distance before you buy.
You want to show your face and the work on your desk at different times, without having to set up the camera again each time.
You need a setup that fits on your desk and should check whether the camera can be positioned at the distance you need.
First decide what matters most to you: showing the work surface, sharp close-ups, colour and lighting, spoken explanations, or switching between the teacher and the demonstration.
A good fit if: you want to show your hands and artwork from above for most of the lesson.
Bear in mind: the arm and your artwork need to fit within the available space and capture area.
A good fit if: you’re usually on camera and want to show your desk from time to time.
Bear in mind: an angled desk view doesn’t guarantee that the whole work surface will be shown from directly above.
A good fit if: you often stand up or move between workstations while explaining.
Bear in mind: tracking a teacher is not the same as keeping a steady frame on the brush and artwork.
| What to consider | What to look for when buying | Who is this important for? |
|---|---|---|
| Work surface and hands | Measure the space taken up by your artwork, materials and hands, then compare it with the capture area and camera position. | I want to keep the piece, paint and my hands in view together while I demonstrate. Around 31% of consumers prioritise showing the entire work surface. |
| Focusing at working distance | Measure the distance from the lens to the painted surface and check that it falls within the stated focusing range. | When I’m demonstrating fine brushstrokes, I want the painted surface to stay in focus at my working distance. Around 25% of consumers prioritise focusing at close working distances. |
| Lighting and colour | Make a test recording with your own lights and paints, and check for reflections on glazed work. | If viewers need to distinguish between paint colours, I want to see how my lighting affects colour and reflections. Around 19% of consumers prioritise lighting and colour. |
| Spoken explanations | Record a test lesson from your usual working position and check that your explanations are easy to understand. | I want to be clearly heard while looking at my work rather than at the monitor. Around 13% of consumers give spoken explanations top priority. |
| Switching between frames | Try switching between your face and the work surface in your recording software. | When I switch between showing my face and my artwork, I want both frames to be practical to use. Around 12% of consumers prioritise switching between the teacher and the demonstration. |
A webcam shows your desk from wherever it’s positioned. The name of a camera mode alone won’t tell you whether the whole piece and your hands will be in shot.
Mark out the space you need on your desk and try the intended camera angle before choosing a model.
You may need a different camera mount or a second camera angle to get the view you want.
A resolution figure doesn’t tell you whether the camera will focus at your working distance or show the whole work surface.
Check the focusing distance, capture area and positioning first; then compare resolutions.
An extra manufacturer’s warranty is not the same as your right to a product that is fit for purpose. The Dutch government states that there is no fixed statutory warranty period in the Netherlands.
Check any additional warranty terms separately. If there’s a fault, contact the seller.
Document cameras for physical teaching materials; the V4K PRO 120 is worth considering if an overhead view is your main shot.
The MX Brio is a webcam for showing the teacher, with Show Mode for showing the desk.
The Link 2 range combines webcam use with DeskView; the Link 2 also has a moving gimbal.
The Facecam Neo is designed for a fixed recording setup with a separate mount.
The Tiny 2 is a tracking webcam for lessons where the teacher moves around the room.
These webcams suit a fixed desk setup for spoken explanations. Check whether the positioning you choose for each model will also work for showing your work surface.
Image unavailable
Suitable for spoken lesson explanations from a fixed setup on a laptop, desktop computer or monitor.
The product name lists 4K UHD, 8 MP, autofocus, dual built-in microphones and a privacy shutter.
The product description lists a clip mount and noise reduction for speech.
Image unavailable
Suitable for a fixed desk or screen setup when you want to record spoken explanations.
The product name lists 2K QHD.
The product description lists a noise-cancelling microphone, mounting on a monitor or laptop, and tripod mounting.
Choose a document camera if you want to show your hands and artwork almost continuously and the capture area suits your work. If you’re usually on camera and want to show your desk from time to time, consider a webcam with Show Mode or DeskView and check the framing in your own setup.
Measure the distance from the lens to the painted surface and make a test recording with your hands moving. Elgato lists a focusing range of 30–120 cm for the Facecam Neo; IPEVO lists a range starting at 10 cm for the V4K PRO 120. Clean the lens according to your model’s instructions: for the Facecam Neo, Elgato recommends a microfibre cloth and advises against using paper towels or cleaning products.
For online purchases from a business, you’ll often have a 14-day cooling-off period, with some exceptions. The Dutch government states that there is no fixed statutory warranty period in the Netherlands; however, you are entitled to a product that is fit for purpose and can contact the seller if there’s a problem. Check the terms that apply to your purchase.
This depends on the purpose and how you film and use the footage. According to the Dutch Data Protection Authority, the GDPR applies when someone films professionally or commercially on behalf of a business or organisation. Before recording, check which privacy rules apply to identifiable participants and your intended use of the footage.