Who is this guide for?

Portfolio uploaders with a poor connection at their workspace

You upload files from a room where Wi-Fi is weaker than near the router. First, compare a wired upload test near the router with one at your workspace. This will help you work out whether the issue is your internet connection or local coverage.

Households with a mix of old and new Wi-Fi devices

You want to keep a laptop, phone and older devices connected. Consumentenbond points out that devices using an older Wi-Fi version can connect, but won’t automatically benefit from Wi-Fi 6 improvements.

Households with several rooms affected

You have coverage problems in more than one place. In that case, consider more than just adding a single point: think about how many points you need, where to place them and whether they’re compatible with your existing router.

What should you look for?

Wireless Wi-Fi extender

A good fit if: Wi-Fi is weak mainly in one workspace and there’s still a spot between the router and that room with a usable signal.

Bear in mind: the connection to the router remains wireless, so performance depends on placement and your home.

Wired access point

A good fit if: you can run a network cable to your workspace and want to add Wi-Fi there for other devices.

Bear in mind: running a cable takes extra installation work; check that the model you choose has an access point mode.

Mesh with multiple points

A good fit if: several rooms have coverage problems and one additional point is unlikely to be enough.

Bear in mind: the number and placement of the points matter. Consumentenbond notes that not every mesh system offers good coverage.

Powerline with Wi-Fi

A good fit if: there’s no usable wireless connection to the problem room and running a network cable isn’t practical.

Bear in mind: performance also depends on your home’s electrical wiring. devolo also notes that interference can occur with certain VDSL connections.

Choose based on the connection you need. First, test your upload speed, then decide whether you need to improve coverage in one room or several, and check the connections and compatibility.

Concern What to look for when buying Who is it for?
Reliable uploads Compare a wired upload test near the router with one at your workspace. Then check where an extender can still receive a usable signal from the router. If I upload portfolios from a room with weak Wi-Fi, I want to know whether the limitation is my internet connection or the coverage. Around 33% of consumers put reliable uploads first.
A mix of devices Check the Wi-Fi bands and standards supported by your devices, and whether mesh features work with your exact router model. If I use old and new devices at home, I want to know in advance which features each device can use. Around 27% of consumers prioritise compatibility with different devices.
A wired workspace Check whether you can run a cable to your workspace and whether the model has an access point mode. If I have a permanent workspace and can run a network cable to it, I want a Wi-Fi point with a wired connection. Around 20% of consumers put this solution first.
Coverage in several rooms Map out the rooms with problems and check that your router is compatible with the mesh points. For powerline, check the connection and signal where you plan to use it. If several rooms have coverage problems, I want to improve more than just the place where I upload. Around 20% of consumers prioritise coverage in different areas.

Common buying mistakes

  • Assuming a high AX speed guarantees fast uploads

    Upload speed also depends on your internet connection and the connection between your workspace, the extension point and the router.

    Compare a wired upload test near the router with one at your workspace. Don’t choose based only on a quoted Wi-Fi link speed.

  • Assuming every mesh device works with every router

    TP-Link’s OneMesh requires a compatible OneMesh router. FRITZ! describes Mesh integration with a FRITZ!Box; this doesn’t confirm the same integration with other routers.

    Before you buy, check your exact router model and the mesh technology it supports.

  • Assuming powerline is a guaranteed fast alternative to Ethernet

    Your electrical wiring affects performance. devolo also notes that VDSL interference may occur in certain circumstances.

    Check which adapters are included in the kit and assess the connection in your own home. If you have VDSL, also check the manufacturer’s guidance on possible interference.

Relevant brands to consider

TP-Link

The RE605X and RE705X are Wi-Fi 6 extender options with a gigabit port and access point mode.

  • TP-Link says the RE605X has a signal indicator to help you find a suitable position.
  • OneMesh requires a compatible OneMesh router. Quoted Wi-Fi speeds are not measured upload speeds in your home.

FRITZ!

The FRITZ!Repeater 1200 AX is worth considering if you already have a FRITZ!Box or want a gigabit LAN connection.

  • FRITZ! describes a Mesh connection with a FRITZ!Box and a LAN connection.
  • Using it with other routers doesn’t automatically mean you’ll get the same FRITZ! Mesh integration.

devolo

Magic 2 WiFi 6 next is a powerline alternative with Wi-Fi for rooms where a wireless connection to the router or running a cable is difficult.

  • devolo says the Starter Kit includes two adapters and two gigabit ports.
  • Actual powerline throughput also depends on your electrical wiring; VDSL interference can occur in certain circumstances.

D-Link

The E15 is a dual-band Wi-Fi 6 extender for anyone exploring the EAGLE PRO AI mesh ecosystem.

  • D-Link lists mesh support with other EAGLE PRO AI devices and quoted speeds of 1201 Mbps on 5 GHz and 300 Mbps on 2.4 GHz.
  • These are manufacturer specifications, not measured portfolio upload speeds or proof of compatibility with every router.

Joybuy products for this situation

This selection includes mesh kits for multiple rooms and wired access points for a permanent workspace. According to the Dutch Authority for Digital Infrastructure, stricter requirements apply to wireless equipment placed on the EU market from 1 August 2025. Check the applicable conformity requirements and the correct CE marking for the specific item.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 2-pack

An option to consider if you’re looking for a two-unit mesh kit to improve coverage in several areas.

View at Joybuy
TP-Link Deco X50, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 3-pack, dual-band Wi-Fi 6

A mesh kit to consider if you want to improve coverage in several rooms.

The product name lists Wi-Fi 6 (802.11ax) and 2.4 and 5 GHz bands. Check which bands and features your own devices support.

View at Joybuy
TP-Link Omada EAP653 wireless access point, 2976 Mbit/s, PoE

TP-Link Omada EAP653, 2976 Mbit/s, PoE

A wired access point to consider if you can run a network cable to your workspace.

The product name lists 2976 Mbit/s and Power over Ethernet (PoE). A quoted Wi-Fi speed is not a measured upload speed.

View at Joybuy
TP-Link EAP725-Wall, 5012 Mbit/s, white, PoE

TP-Link EAP725-Wall, 5012 Mbit/s, white, PoE

A wall-mounted access point to consider for a permanent location where you can provide a wired connection.

The product name lists 5012 Mbit/s and Power over Ethernet (PoE). Check that the cabling and power supply required are suitable for your setup.

View at Joybuy
TP-Link Deco XE75, tri-band Wi-Fi 6E

TP-Link Deco XE75, tri-band Wi-Fi 6E

A mesh option to consider if you want to improve coverage in several rooms.

The product name lists 2.4, 5 and 6 GHz bands and Wi-Fi 6E. Check that your devices support the bands you want to use.

View at Joybuy

Frequently asked questions

How can you tell whether an extender could help with portfolio uploads?

First, test your upload speed using a cable connected to the router, then test it again at your workspace. If the wired upload is already slow near the router, look at your internet connection first. If the problem is mainly at your workspace, investigate Wi-Fi coverage and placement.

Will older devices still work with a Wi-Fi 6 extender?

Yes. Devices using an older Wi-Fi version can stay connected, but won’t automatically benefit from Wi-Fi 6 improvements, according to Consumentenbond. Also check which Wi-Fi band and security settings each device supports.

What should you do after installation to use it safely?

Check for available firmware updates and install them. Also make sure the extender is positioned where it can still receive a usable signal from the router.

What’s the difference between a manufacturer’s guarantee and your statutory consumer rights in the Netherlands?

A manufacturer’s guarantee does not replace your statutory consumer rights. According to ACM ConsuWijzer, the seller is responsible if a product used normally develops a fault sooner than you could reasonably expect. You may then be entitled to a repair, replacement or refund.

Can wireless equipment be placed on the European market without the correct CE marking?

According to the Dutch Authority for Digital Infrastructure, wireless equipment that does not meet the applicable European requirements must not be placed on the EU market; the correct CE marking is required. Stricter requirements have applied since 1 August 2025 to equipment placed on the market from that date. Check the conformity and marking of the specific item.