Choose your camera and lens as a combination. First decide how large you want the details on the watch face to appear in the frame, and how much room you need in front of the lens for your lighting. A macro lens can magnify small details, but it won’t prevent reflections. For a series of online shop images, a fixed set-up and consistent white balance matter too. Check which lens is actually included in the set on offer.
Who is this guide for?
Online shop owner showcasing watch face details
You want to make small markings and finishes clearly visible. Choose your camera body and lens based on the magnification you need, not just the number of megapixels. Canon Netherlands and Nikon Netherlands provide lens-specific magnification details.
Seller of highly reflective watches
You want to stop the hands, glass or metal from reflecting the camera and light sources. So, alongside choosing a camera, pay attention to the shooting angle and lighting. Your Product Photographer describes reflections on watches, while Sony Netherlands explains the difference between focusing distance and working distance.
Online shop owner creating a large photo series
You want to photograph watches in a consistent way. Keeping the framing, lighting and colour settings consistent will help you create a more uniform series. Canon Netherlands explains how to use a tripod for consistent product photos, while Nikon Netherlands discusses setting the white balance in advance.
What should you consider when choosing?
Start with the framing you want, then check whether the lens leaves enough room for your lighting set-up. Test for reflections and consistency with the actual watches you plan to photograph.
| What to consider |
What should you look for? |
Who should prioritise this? |
| Small details |
Check the maximum magnification of the exact lens, and take a test shot of a watch in the size you sell. |
If I want to show small markings clearly, I focus on the lens’s magnification. Around 33% of consumers prioritise magnifying details. |
| Reflections |
Try a different shooting angle and check whether there’s enough room around the watch to position the lights. |
With reflective glass, I first want to see whether a different angle or lighting set-up changes the reflection. Around 27% of consumers give manageable reflections top priority. |
| Consistent photos |
Check that you can position the camera steadily and use the same white balance when the lighting stays the same. |
When I photograph a series of watches, I want to match the framing and colours as closely as possible. Around 20% of consumers prioritise this consistency. |
| Complete equipment |
Check what’s included in the set and the lens mount, and find out whether you need a separate macro lens to capture the details you want. |
When I want to know exactly what I need to buy, I check the camera body, lens and set-up together. Around 20% of consumers look first at the complete equipment package. |
Common pitfalls
-
Assuming a camera body or standard kit is a complete macro set-up
A magnification figure applies to a specific lens; a camera body can be used with different lenses.
Check exactly what’s included in the set, the lens mount and the maximum magnification of the lens actually on offer.
Adjusting the lighting and taking multiple shots can take extra time.
Camera brands and lenses to consider
Canon
The EOS R50 is an RF/RF-S camera body that you can pair with a compatible lens. Assess the lens separately if you want to capture small details on a watch face.
- Canon Netherlands lists a maximum magnification of 1.4× for the separate RF 100mm F2.8L Macro IS USM lens.
- That magnification applies to this lens, not to the EOS R50 body or every R50 kit. Check which lens is included in the offer.
Nikon
The Z50II is a Z system camera that you can assess with the separate NIKKOR Z MC 50mm f/2.8 lens for small subjects.
- Nikon Netherlands specifies a 1:1 reproduction ratio for this lens.
- Nikon Netherlands states that there is around 5 cm of space in front of the lens at the minimum focusing distance. Bear in mind that limited space can make it harder to position lighting around the watch.
Sony
The α6700 has an E-mount. The separate FE 90mm F2.8 Macro G OSS is an option to consider if working distance is important to you.
- Sony Netherlands specifies a maximum magnification of 1.0× and a working distance of around 13 cm at the minimum focusing distance for the SEL90M28G lens.
- This distance applies to that lens and focusing setting. More room in front of the lens won’t prevent reflections by itself, so test the camera and lighting angles with the watch.
Cameras for product photography
These Joybuy product picks are cameras for photography and product images. For each model, check whether the lens is suitable for the framing and detail magnification you want for a watch face.
No image available
Komery W6 12× optical zoom, 4K digital camera, 64 MP
The listed zoom is useful if you want to try different framings. Check that the lens can also capture the close-up shots you want of your watches.
The product name lists 12× optical zoom, 4K, 64 MP and Wi-Fi.
Joybuy
No image available
DJI Osmo Pocket 3 Creator Combo
This version could be a good fit if you want to make videos as well as take product photos. Check separately whether the camera meets your close-up requirements.
The product name lists a 1-inch CMOS sensor, 4K/120fps, 3-axis stabilisation and an included microphone.
Joybuy
No image available
DJI Osmo Pocket 3
This camera could be worth considering if you want to explore photography and video with one compact camera. Check that the lens can capture the watch face at your desired framing.
The product name lists a 1-inch CMOS sensor, 4K/120fps and a 2-inch rotating touchscreen.
Joybuy
No image available
Sony ZV-E10 + 16–50 mm zoom lens, black
The included zoom lens can be useful if you want to try different framings for wider shots. Check that this combination can also capture close-ups of your watches.
The product name lists a 16–50 mm zoom lens.
Joybuy
No image available
Sony Alpha A6100 + 16–50 mm f/3.5–5.6 OSS II
This version could be a good fit if you’re looking for a camera with a zoom lens for different framings. Check that the lens can capture the level of detail you want on the watch face.
The product name lists a 16–50 mm f/3.5–5.6 OSS II lens.
Joybuy
Frequently asked questions
Do you need a 1:1 macro lens for every watch face photo?
No, it depends on the framing you want and the size of the details. Compare the maximum magnification of the lens included in the set on offer. This figure is a property of the lens, not of every camera body.
How can you stop the camera appearing in the watch glass?
Try a different shooting angle and assess the lighting with the watch in place. Changing the camera alone won’t guarantee a reflection-free shot.
What can you do if the whole watch face isn’t in focus?
You can take photos using different focus points and combine them with software. Nikon calls this technique focus stacking; check which features your specific camera supports.
What should you bear in mind when cleaning the camera sensor?
Check your photos for dust spots, especially after changing a lens. Canon warns that dust can get onto the sensor and offers cleaning as a separate service. Check the terms for your model and service centre.
What should a Dutch online shop bear in mind when photographing watches for sale?
Your product presentation must not mislead consumers about what’s on offer or leave out important information. So check that edits don’t give a misleading impression of the watch face, colour or condition. The Netherlands Authority for Consumers and Markets describes these rules for product presentation.
Does consumer protection automatically apply if you buy a camera for your online shop?
Not always. According to ACM ConsuWijzer, consumer protection doesn’t automatically apply when you use a product mainly or exclusively for business. Before placing a business order, ask about the applicable seller and manufacturer terms; the circumstances determine what applies.