If you’re only mixing vocals that have already been recorded, and your computer’s headphone output works well with your software, try that first: you may not need an audio interface at all. For new vocal recordings, a USB-powered interface could save you a power socket, provided your computer port supplies enough power and the model has the right microphone inputs and monitoring features. Specifications describe connections and controls, not how a model sounds in your room.
Who is this choice relevant to?
Mixing existing vocal tracks
You mainly want to listen to and balance harmonies, without recording anything new. Try your computer’s existing output first; Apple Support lists this as an alternative to an external audio interface for GarageBand on a Mac.
Singer recording harmony overdubs
You record vocals one at a time and want to hear yourself alongside the existing tracks, without necessarily using an extra mains adaptor. Compare the USB power requirements and how the live input and computer playback are monitored.
Two people recording together
You need two microphone channels that can be used at the same time. Check the phantom power, USB power and monitoring for each model; manufacturers such as Focusrite, MOTU and Audient describe different requirements and control options.
What should you look for?
First decide whether you’re only mixing existing recordings or also want to record vocals. Then check whether your computer can power the interface and whether its connections suit the number of microphones you’ll use at once.
| What to consider |
What should you check? |
Who is this important for? |
| Power without an extra socket |
Compare the model’s power requirement with your computer port. Also check that any USB hub you use supplies enough power. |
If I don’t want to use an extra power socket, the interface needs to work with my computer. Around 33% of consumers in this situation make power their top priority. |
| Do you need an interface? |
First try playing existing tracks through your computer’s output and headphones. Then consider which connections or controls you’re missing. |
If you only want to mix existing vocal tracks, you can start with your computer’s output. Around 25% of consumers in this situation make mixing their top priority. |
| Overdubbing one vocal |
Check that the microphone input and any phantom power are suitable for your microphone, and how you’ll hear the live vocal alongside computer playback. |
If I record vocal takes one after another, I want to hear the new vocal alongside the earlier layers. Around 25% of consumers in this situation make overdubbing their top priority. |
| Two microphones at once |
Check how many microphone channels can be used at the same time, and how the XLR, jack and phantom power circuits work on each model. |
For a two-person recording, I need two microphones on separate channels. Around 17% of consumers in this situation make simultaneous recording their top priority. |
Common pitfalls
-
Buying an interface because your project has lots of vocal tracks
The number of existing digital tracks doesn’t determine how many physical microphone inputs you need just to mix them.
First check whether your mixing software and headphones work with your computer’s existing output.
An extra device and USB port could go unused if you don’t need additional connections.
-
Assuming USB power will work through any hub
A USB-powered interface may still not get enough power from a computer port or passive hub. Audient specifies a minimum of 0.9 A at 5 V via a suitable USB 3.0 connection for the iD14 MKII; Arturia warns that a passive hub may not supply enough power to the MiniFuse 2.
Check the exact model’s power requirements, the output of your computer port and which cables are included.
Depending on your setup, you may still need a suitable powered hub or a separate power supply.
-
Assuming two connections mean two independently usable microphone channels
On the Scarlett 2i2 4th Gen, connecting a jack cable disables the XLR input on the same channel. Focusrite also states that phantom power applies to both inputs at once.
Map out your signal path for simultaneous recording and check the input switching and phantom power on the exact model.
You may need a different model or setup for another combination of sources.
-
Confusing a dedicated headphone volume control with a separate headphone mix
According to Arturia, the MiniFuse 2’s headphone output follows the same monitor mix, although its volume can be adjusted separately.
If two singers need different headphone mixes, check the signal routing rather than just the number of volume controls.
Relevant brands to consider
These models illustrate different connection and control options; a brand mention alone says nothing about availability or suitability for every setup.
Focusrite
The Scarlett 2i2 4th Gen is a two-channel option for vocal recording, with direct monitoring controls and USB power.
- Focusrite’s manual lists two XLR microphone inputs, a headphone output and an optional separate 5V power input.
- Connecting a jack cable disables the XLR input on the same channel. The 48V phantom power applies to both inputs, so check that it suits your microphones.
MOTU
The M2 is a USB-powered, two-channel option with individual input switches and clearly visible level meters.
- MOTU specifies two combo inputs, a monitor switch and phantom power for each input, plus headphone and line outputs.
- These connection and control specifications don’t prove an audible advantage over another brand in your setup.
Arturia
The MiniFuse 2 is a compact USB setup with a control for blending the live input and computer playback.
- Arturia documents two inputs, 48V phantom power, a headphone output and power supplied via the USB connection to the computer.
- According to Arturia, the headphone output follows the same monitor mix, with its own volume control. A passive hub may not supply enough power.
Audient
The iD14 MKII may be worth considering if you want to power two phantom-powered microphone channels via USB and your host port meets the requirements.
- Audient specifies bus power for two channels of phantom power via a USB 3.0 connection that supplies at least 0.9 A.
- According to Audient, a USB-C port supplying 1.5 A offers more headroom for headphones. This depends on the port and is not a general statement about listening performance.
PreSonus
The Studio 24c is a USB-powered, two-channel option with an analogue control for mixing live inputs and computer playback.
- PreSonus specifies two mic, line and instrument inputs, a headphone output and MIDI in and out.
- The official product information mentions a software trial period. Read the terms of the specific bundle before assuming it includes a full licence that won’t expire.
Audio interfaces on Joybuy
Related products coming soon.
Frequently asked questions
Do I always need an interface to mix harmonies that have already been recorded?
No, not if your software and your computer’s built-in audio output play your existing tracks well. For GarageBand on a Mac, Apple Support describes playback through the built-in audio output as an alternative to an external interface; check whether this works with your computer and headphones too.
How can I avoid a USB interface still needing a power socket?
Compare the exact model’s power requirements with your computer’s USB port. Audient specifies a minimum of 0.9 A at 5 V via a suitable USB 3.0 port for the iD14 MKII; Arturia warns that some passive hubs may not supply enough power to the MiniFuse 2.
What should I check when connecting a condenser microphone?
Check whether your microphone needs 48V phantom power and use the designated microphone input. According to Focusrite, on the Scarlett 2i2 4th Gen, switching on phantom power affects both XLR inputs, while connecting a jack cable disables the XLR input on the same channel.
Which Dutch consumer rights and safety rules are relevant when buying online?
Electrical and electronic equipment sold in the Netherlands must comply with the applicable European product rules; check that the specific product listing confirms compliance. According to the Dutch government, distance purchases generally come with a 14-day cooling-off period, subject to exceptions. The legal guarantee entitles you to a product that works as it should; there is no fixed general guarantee period in the Netherlands, and the seller is your point of contact if something goes wrong.