Who is this guide for?

Duos who want to hear how they play together

You’re looking for a clear left-to-right balance and a shared sound, and you can try different microphone positions in the room. Shure explains how stereo miking can make the placement of instruments audible.

Players in a reverberant rehearsal room

You want to reduce unwanted room sound and understand that recording closer to the instrument can sound different from hearing it at a listening distance. DPA Microphones discusses this trade-off in its guide to recording a violin.

Recordists who want to adjust each violin separately

You want more control over the two parts afterwards, so you’ll need two suitable microphones and separately recordable channels. Your recording setup should also take account of microphone placement and possible spill between the players.

What should you look for?

Adjustable stereo pair

Choose this if: you want to record the duet as a single stereo image and adjust the distance and angle of two microphones.

Trade-off: you’ll need to set up two microphones and their cables. The farther away they are, the more room sound you’ll pick up.

Fixed X/Y stereo microphone

Choose this if: you want to set up one microphone position for both players without placing two separate microphones.

Trade-off: the capsules are set at a fixed angle, so you can’t adjust their positions independently.

Two closer-positioned microphones

Choose this if: reducing unwanted room sound or adjusting each part separately matters more than creating a single shared stereo image.

Trade-off: recording close up can change the perceived sound of the violin, and it won’t eliminate spill between the players.

Recorder with built-in stereo microphones

Choose this if: you want to record the duet using a recorder with microphones built into the same device.

Trade-off: built-in microphones can’t be positioned around the room separately, unlike standalone microphones.

Consideration What should you check? Who should pay particular attention?
Stereo image Make a test recording from the intended position and compare the balance between the two players. If I want to hear both violins as one cohesive stereo image, I want to be able to try different positions. Around 29% of consumers prioritise the stereo image of the duet.
Room sound Listen to test recordings made at different distances and judge whether the room sound is intrusive. If the rehearsal room is too prominent in the recording, I want to be able to reduce the amount of room sound. Around 29% of consumers prioritise reducing unwanted room sound.
Adjusting each part separately Check whether you can connect two microphones to separate recording channels and whether the power supply is suitable. If I want to process the parts separately after recording, I need two suitable channels. Around 21% of consumers prioritise being able to adjust each violin separately.
Setup and portability Consider whether built-in microphones will do, or whether you’ll need separate microphones, storage and a power supply. If I want to record a rehearsal without lots of separate equipment, a simple setup is important. Around 21% of consumers prioritise being able to pack up and set up quickly.

Common buying mistakes

  • Thinking a stereo microphone will solve a reverberant room

    Stereo recording also captures information about the surroundings. Choosing a different microphone model won’t automatically change how much room sound ends up in the recording.

    Make short test recordings at different positions in the rehearsal room and listen to find the balance you want between direct sound and room ambience.

  • Buying a microphone without checking the full two-channel setup

    A single microphone isn’t a set for two violins. The model you choose may also require specific inputs or power; according to RØDE, the NT5 requires P48 via XLR.

    For each model, check how many microphones are included, the connections, the required power and the accessories supplied with that version.

  • Assuming two microphones will give you two completely separate violin tracks

    Placement affects how much sound from the other player each microphone picks up. Spill can still occur even when you use two microphones.

    Record both players together and listen to each channel separately before settling on your final setup.

Brands to consider

RØDE

The NT5 and NT4 offer two different options: a matched stereo pair or a microphone with fixed X/Y capsules.

  • RØDE says the NT5 is available as a matched pair for stereo recording.
  • According to RØDE, the NT5 requires P48 via XLR. The manufacturer says the NT4 runs on a 9V battery or P48 and has a fixed capsule angle.

LEWITT

The LCT 040 MATCH stereo pair is designed for those looking for two cardioid instrument microphones that can be positioned separately.

  • LEWITT describes the LCT 040 MATCH as a matched stereo pair.
  • LEWITT’s quick-start guide specifies 48V power. Check that you also have the necessary recording inputs; a pair won’t automatically give you isolated violin tracks.

DPA

The 4099 CORE+ is an option for placing a microphone closer to an instrument.

  • DPA offers different 4099 versions and instrument clips.
  • For a duet, check that you have two suitable microphones and clips. DPA describes close-miking as a trade-off compared with the sound of the instrument at a distance.

ZOOM

The H5studio is a portable recorder with built-in microphones and connections for adding external microphones.

  • ZOOM specifies two XLR/TRS inputs with +48V phantom power and a headphone output.
  • The built-in microphones can’t be positioned separately on two microphone stands.

Tascam

The DR-40XP combines a portable recorder with adjustable built-in stereo microphones and external inputs.

  • Tascam specifies adjustable built-in microphones for X/Y or A/B configurations.
  • According to Tascam, the two external inputs support 48V phantom power. The built-in microphones remain part of a single recorder.

Products on Joybuy

Related products coming soon.

Frequently asked questions

How should you start positioning microphones for two violins?

Start with a short stereo test recording of both players in their actual playing positions. Listen to check whether the balance and amount of room sound are right, then move the setup and compare again. Shure doesn’t recommend one universal microphone position for every instrument and room.

Do you always need a separate power supply for two condenser microphones?

Not if your recorder provides the connections and power required by your chosen pair. For example, RØDE specifies P48 for the NT5, while ZOOM specifies two XLR/TRS inputs with 48V phantom power for the H5studio. Check that the microphones and recorder work together: one microphone input isn’t a two-channel setup.

How should you look after microphones after a rehearsal?

LEWITT advises protecting the LCT 040 MATCH from moisture, dust and extreme temperatures. Follow the manufacturer’s care instructions for other models. If a product you bought as a consumer is faulty, the seller must provide a solution under Dutch government guidance; this is separate from any manufacturer’s warranty.

Can you publish a recorded duet online without further checks?

Not without checking the rights first. Dutch government guidance covers copyright in music and performers’ neighbouring rights; a copy for personal use can’t simply be distributed or made public. Privacy rules may also apply if you publish other people’s personal data. Before publishing, check whose permission you need.

What cooling-off period applies when you buy a microphone online?

According to Dutch government guidance, a 14-day cooling-off period applies in many cases when you buy from a business at a distance, although there are exceptions. The guidance says that an online purchase from a private seller isn’t covered by distance-selling rules. Check who the seller is and which terms apply to your order.