Who is this buying guide for?

Maker with a glossy game board

Films cards, the board and moving hands from above, and wants to adjust the direction and softness of the light to keep details visible. Canon Europe explains how diffused light can soften shadows, while NEEWER describes the diffusers supplied with the NL660 set reviewed.

Maker in a shared workshop

Wants to keep walkways clear and move or put away the lighting after filming. Mounting, cables and any tripod feet all play a part; NEEWER, Elgato and SmallRig describe different setup options.

Maker recording a voiceover

Wants to match the light colour to changing ambient light and take potential fan noise into account while recording. amaran and Godox describe adjustable lights. Godox says the SL60IIBi has a quieter fan, but that doesn’t tell you how audible it will be in this workshop.

What should you look for when buying?

What to consider What should you check? Who is this most important for?
Clarity and reflections Film a glossy card and moving hands; assess the angle of the light, the diffuser and how well the playing area is covered. If I want the cards and board to remain clear without distracting reflections or hand shadows, I put the positioning of the lights first. Around 33% of consumers say clarity is their main consideration.
Space and mounting Measure the available table edge and space beside the table; check where tripods and cables can go. If I need to keep the walkway clear and pack the setup away after filming, I focus on the mounting and setup. Around 27% of consumers give shared space top priority.
Colour in changing light Check the adjustable colour temperature and film a familiar game component using the lighting that will be on during recording. If game colours need to stay recognisable as the ambient light changes, I want to be able to match the light and camera white balance to the image. Around 20% of consumers put colour consistency first.
Sound and power Record a quiet section with the light on; also check whether the power supply or battery life will suit the planned recording time. When I’m recording a voiceover, I don’t want distracting noise from the light or an interruption caused by a flat battery or unsuitable power supply. Around 20% of consumers say uninterrupted recording and practical power are their main considerations.

Pitfalls to avoid

  • Assuming a lux reading with a reflector is the same as light with a softbox

    For the 100x S, amaran gives a maximum of 30,500 lux at 1 metre with the Hyper Reflector at 5,600 K. That isn’t the same setup as using a softbox.

    Only compare light readings when the distance and accessories used are the same. Also check what’s included with the exact version.

  • Treating different NL660 versions as the same kit

    NEEWER describes both a single panel and a two-panel set. The set reviewed includes two stands, but the NP-F batteries mentioned are not included.

    Before buying, check which version and accessories are on offer, and whether you have room for the stands in your workshop.

  • Assuming you’ll get maximum brightness with every power supply

    Elgato lists different maximum light outputs for the Key Light Air MK.2 depending on the power supply. Elgato says a suitable power adapter is not included.

    Check the power supply for the exact version before relying on its stated maximum light output.

  • Focusing only on the light and forgetting about the workshop setup

    A desk clamp, tripod feet and power cables each need a different spot around the gaming table. In a shared workshop, this can affect the available walkway.

    First decide where the table, camera, players and walkway will be. Then choose a clamp, tripod setup or portable mount.

Relevant brands and product ranges

NEEWER

The NL660 range reviewed includes a single panel and a two-panel set. The set may be useful if you want to light the board from two directions.

  • NEEWER says the two-panel set includes two diffusers and two stands, with adjustable white light from 3,200–5,600 K.
  • The NP-F batteries mentioned are not included. The manufacturer’s information doesn’t show how reflections will look on your board game.

Elgato

The Key Light Air MK.2 is a desk panel for setups with a suitable table edge, making it an option if you have limited floor space.

  • Elgato specifies a desk clamp for desks up to 6 cm thick and an adjustment range of 2,900–7,000 K.
  • The stated maximum of 2,100 lumens depends on the power supply. According to the specifications, a suitable power adapter isn’t included; coverage across a whole board game hasn’t been demonstrated.

amaran

The 100x S is a standalone COB studio light for anyone who wants to put together their own setup with a suitable Bowens light modifier.

  • amaran specifies a colour temperature of 2,700–6,500 K and a Bowens mount.
  • The stated 30,500 lux at 1 metre applies with the Hyper Reflector at 5,600 K, not with a softbox. A softbox and stand aren’t listed as included in the box.

Godox

The SL60IIBi is a Bowens studio light to consider if you can use an adjustable light modifier in your setup.

  • Godox specifies a colour temperature of 2,800–6,500 K, dimming from 0–100% and a Bowens mount for the SL60IIBi.
  • Godox describes the fan as quieter, but that doesn’t establish how audible it will be in your workshop. Follow the safety instructions for this model.

SmallRig

The RC 60B, version 4376B, reviewed here is a portable option if you move your filming location around the workshop.

  • SmallRig lists a built-in battery, adjustable white light from 2,700–6,500 K and a run time of 45 minutes at full power or 75 minutes in ECO mode.
  • The SmallRig PD charger mentioned must be bought separately. This manufacturer information doesn’t prove that the light can illuminate the whole board without additional mounting equipment.

Portable video lights at Joybuy

These product picks are battery-powered portable video lights for a setup you can move around the gaming table. For each model, check whether the light reaches the whole playing area and whether the specific product on offer has the applicable CE marking; the product name alone doesn’t confirm this.

COLBOR 60W portable RGBCW COB video light

COLBOR 60 W portable RGBCW video light

A battery-powered option to consider if you want to move the light setup while filming; check in a test recording that the spread of light suits the whole board.

The product name lists a built-in 59 Wh battery and adjustable RGBCW light from 2,700–6,500 K.

View at Joybuy
Ulanzi VL81 rechargeable LED video light, black

Ulanzi VL81 rechargeable LED video light, black

Worth considering for a portable filming setup; check that the mount and spread of light work with your camera and cover the whole playing area.

The product name describes the VL81 as a rechargeable black LED video light.

View at Joybuy
Ulanzi VL49 RGB video light with 2,000 mAh battery

Ulanzi VL49 RGB video light, 2,000 mAh

A compact, portable light source to consider if you want flexibility over positioning; test whether one light illuminates the board evenly enough.

The product name lists a 2,000 mAh battery, a magnet on the back and adjustable light from 2,500–9,500 K.

View at Joybuy
Ulanzi LM001 portable mini fill light with 500 mAh battery

Ulanzi LM001 portable mini fill light, 500 mAh

Worth considering as a compact fill light that you can position flexibly; check in a test recording that the light reaches the board and cards.

The product name lists a 500 mAh battery and magnetic mounting.

View at Joybuy
Ulanzi LM07 portable LED video light with zoom lens

Ulanzi LM07 LED video light with zoom lens

Worth considering if you want to position a portable light source precisely; check on camera whether the beam is wide enough for the board, cards and hands.

The product name lists a 2,000 mAh battery, four brightness levels, a colour temperature of 2,000–5,500 K and a weight of 187 g.

View at Joybuy

Frequently asked questions

Do I need continuous light or a camera flash to capture moving hands?

For video, continuous light is a practical choice because you can see how the board and hands are lit while you’re filming. Zoom.nl describes flash as a brief burst of light used mainly for photography.

How can I reduce reflections on cards?

Start with diffused light that you can move in relation to the camera and board, then check the glossiest card in a test recording. Diffusion can soften shadows, but the angle of the light still matters; there’s no guarantee that a particular setup will prevent reflections.

How can I keep game colours recognisable under different workshop lighting?

Check the camera’s white balance under the lighting that will actually be on during recording, and compare a familiar game component in a test clip. Adobe says white balance affects all the colours in an image.

Which marking applies to an electric video light sold in the Netherlands?

According to the Netherlands Food and Consumer Product Safety Authority, the applicable CE marking is mandatory for an electrical video light placed on the market in the Netherlands. Check this for the specific product on offer; a brand name doesn’t prove that an individual item meets the requirement.

What if a light I bought online doesn’t suit me or breaks too soon?

For online consumer purchases, ACM ConsuWijzer says you generally have up to 14 days after delivery to change your mind, subject to applicable exceptions. Your statutory guarantee is separate from any manufacturer’s guarantee. If a product breaks sooner than you could reasonably expect under normal use, contact the seller.