Which light is right for you?

Teacher filming close-ups of stitches

If you want to show the needle, thread and hand movements, consider the angle of the light and any shadows that fall across the repair while you sew. Aputure and NEEWER documentation describes adjustable video panels that can be positioned for this kind of setup.

Maker explaining fabric colours

If you’re comparing repair thread with fabric, consider adjustable colour temperature in relation to the room lighting and your camera’s white balance. Nikon describes using a white reference point when setting the white balance.

Maker with a small work surface

If you need to fit a camera, textiles and moving hands into a small space, first work out where a desk clamp or tripod could go and what power supply you’ll need. Elgato and NEEWER list different mounting and box contents for the models mentioned.

What should you look for?

Start with the light’s position and mounting options. Then adjust the lighting and white balance, and record a test clip using the settings you plan to use.

What to consider What to look for when buying Who it’s for
Visible stitches without hand shadows Check whether you can direct the light and dim its brightness; see whether a diffuser is included with the version you’re considering. If I want the needle, thread and my hands to stay visible while I sew, I’ll consider the light’s position and any shadows. Around 40% of consumers give top priority to visible stitches without hand shadows.
Comparing fabric and thread colours Check the adjustable colour temperature range of the exact model and test the fabric with a fixed white balance. When I want to compare fabric and repair thread by colour, I want to see how my camera captures them under the chosen lighting. Around 30% of consumers put colour comparison first.
Preventing banding or flicker Check claims about flicker performance and record a test clip at the brightness, frame rate and shutter speed you plan to use. If I’m filming under artificial light, I want to check first whether my footage shows visible banding. Around 20% of consumers put flicker-free footage first.
Space, mounting and power Measure the available desk edge or tripod space and check the power supply and box contents for the exact version. When my camera, fabric and hands have to share a small work area, I want a mount that won’t get in the way of my setup. Around 10% of consumers let available space and mounting options make the difference.

Common buying mistakes

  • Comparing only CRI or colour temperature

    Manufacturer specifications for a light don’t determine how fabric colours will appear on every camera. White balance and other light in the room also make a difference.

    Compare the specifications for the exact model and record a test clip with your chosen fabric and thread, using a set white balance.

  • Choosing a light without suitable mounting or power options

    The NEEWER NL660 is sold with or without a tripod. Elgato states that the maximum light output of the Key Light Air MK.2 depends on the available USB-C power supply.

    Before buying, check the version, box contents, available clamp space and power supply.

  • Treating lux and lumen figures as the same measurement

    Godox gives a maximum lux figure for the SL60IIBi at one metre with the standard reflector. Elgato lists a maximum lumen figure that depends on the input power. These figures don’t show how much light will fall on your work surface under the same conditions.

    Only compare figures that use the same unit and measurement setup, and assess the light where you’ll be filming.

Brands to compare

The information below applies to the models and versions mentioned. It is not an assessment of an entire brand or an indication of availability.

amaran

A panel option for a portable teaching setup. According to the Aputure manual, the P60x is adjustable from 3200 K to 6500 K.

  • Aputure lists CRI 95+, TLCI 97 and a flicker-free lighting claim for the P60x.
  • These are manufacturer specifications, not an independent test of fabric colours or every camera setting. Check which items are included with the set on offer.

NEEWER

A panel that can be positioned freely. NEEWER lists an adjustable range of 3200 K to 5600 K and mains power via an adapter for the NL660.

  • NEEWER lists dimming, a diffuser and CRI 96+ for this model.
  • According to the listed box contents, a tripod is included only with the ‘with Stand’ version; the NP-F battery is not included. The colour rendering figure is a manufacturer specification.

Elgato

A desk-mounted panel option. Elgato lists a desk clamp and an adjustable range of 2900 K to 7000 K for the Key Light Air MK.2.

  • Elgato says the clamp fits most desks up to 6 cm thick.
  • The stated maximum light output of around 2100 lumens depends on the input power and doesn’t, on its own, show how much light will fall on the fabric. Check the USB-C power supply and whether the light can reach your work surface.

Godox

A COB option if you have room to position a light away from your work surface. Godox lists an adjustable range of 2800 K to 6500 K for the SL60IIBi.

  • Godox lists dimming and control options for this model.
  • The maximum lux figure is measured at one metre with the standard reflector. It doesn’t predict the exposure you’ll get with a different light modifier.

Nanlite

An alternative COB setup. The Nanlite manual lists a range of 2700 K to 6500 K and mains power of 100–240 V, 50/60 Hz for the FS-60B.

  • Nanlite gives average CRI 96 and TLCI 97 figures for this model.
  • Check each listing to see which light modifier, mount and accessories are included.

Video lights on Joybuy

This Joybuy selection features a COB video light for a setup with enough room to position the light away from your work surface. Check which compatible light modifier is included with the version you choose.

COLBOR 200W Bi-Colour COB video light with Bowens Mount

COLBOR 200W Bi-Colour COB video light with Bowens Mount

A COB setup suits a workspace where you can position the light away from the work surface. The Bowens mount provides a way to attach compatible light modifiers. Check whether a suitable light modifier is included with the version you choose.

Power: 200 W.

Colour temperature: 2700 K–7000 K.

Design with built-in power adapter.

Before buying, check the product information for the applicable product safety requirements.

View on Joybuy

Frequently asked questions

How should I set up the lighting and camera when fabric colour matters?

Keep the lighting as consistent as possible while filming, choose a suitable colour temperature and set the white balance for the light falling on the fabric. A white reference point can help. Then review a test clip of the fabric and repair thread.

Is a light described as ‘flicker-free’ enough to rule out banding?

No, that claim doesn’t rule out banding in your footage. The amaran P60x manual describes its light as flicker-free, but the result also depends on your camera and settings. Record a test clip under the artificial lighting you plan to use. Canon Europe describes adjusting the shutter speed as a possible solution with certain light sources.

Will I need a tripod or battery for the NEEWER NL660?

That depends on the version and power supply you choose. According to NEEWER, ‘NL660 with Stand’ includes a tripod and ‘NL660 Only’ does not; the NP-F batteries listed are not included. For mains use, NEEWER lists a supplied adapter and cable.

How long does the statutory guarantee on a video light last in the Netherlands?

There is no fixed statutory guarantee period in the Netherlands. The Dutch government says that the period for which you can reasonably expect a product to work as intended depends on the product. If a product doesn’t meet the terms of the agreement, contact the seller; any manufacturer’s guarantee is in addition to this.

Which product safety rules apply to an electric video light in the Netherlands?

An electric video light sold in the Netherlands must comply with the rules that apply to that product. Business.gov.nl, the Dutch government’s website, explains that the relevant rules can vary by product; wireless features may also be relevant. Where CE marking is required, the manufacturer declares that the product complies. The Dutch government stresses that CE is not a quality mark and does not, in itself, say how well a light performs when filming.