Teacher demonstrating cutting lines
You film your hands and paper from above and want to make sure a shadow from your hand does not obscure the next cut. Canon Netherlands explains how the angle and quality of natural light change.
Start by filming a test while you cut. If the window light is mostly enough, try adding a little fill light before choosing a more powerful lamp. An adjustable panel or a lamp aimed at the table is a good option if you want to position the light by your work surface. A COB light with a suitable modifier gives you another way to shape the beam, but requires extra attention to diffusion, mounting and power.
You film your hands and paper from above and want to make sure a shadow from your hand does not obscure the next cut. Canon Netherlands explains how the angle and quality of natural light change.
You want the paper colours to remain recognisable as the light coming through the window changes. Canon Europe explains how daylight can vary in colour.
You need room for your camera, hands and lamp without a stand or mount getting in the way of the cutting area. A clamp or table-mounted fitting may therefore influence your choice.
A good fit if: a test recording already shows the paper clearly enough, but you are losing detail on the other side of your hands.
Trade-off: you may not need a powerful key light, but window light changes with the time of day and conditions, so check the image again.
A good fit if: you want to position and adjust a light source beside the window in a small or medium-sized workspace.
Trade-off: the clamp, arm, diffuser and power supply vary by model and version, so check what is actually included.
A good fit if: you need more control over the direction and shape of the light and have room for a suitable mount.
Trade-off: a bare or tightly focused light source will not automatically give you soft light across the table. Check that the modifier is compatible and follow its instructions.
| What to consider | What to look for | Who it matters to |
|---|---|---|
| Visible cutting lines | Film while you cut; assess the whole work surface and consider light direction, dimming and diffusion. | When I film from above, I want to be able to follow my hands and cutting lines at the same time. Around 31% of consumers prioritise being able to see the cutting clearly. |
| Paper colours | Compare the recording with the actual paper and check whether the colour temperature is adjustable. Test it in the window light you film in. | When using coloured paper, I want to know whether the shades will remain recognisable on camera as the daylight changes. Around 25% of consumers give recognisable colours top priority. |
| Positioning on the table | Measure the available space and table thickness; check the clamp, arm and height, and whether the lamp can be kept out of shot. | At a small work table, I want to leave room for my hands, tools and camera. Around 19% of consumers prioritise having a suitable, uncluttered workspace. |
| Recording without interruptions | Test your preferred power supply and camera settings; check the recording for noise, flicker or visible bands. | For a lesson that runs continuously, I do not want to have to stop unexpectedly or discover a distracting image. Around 13% of consumers give uninterrupted recording top priority. |
| Complete set-up | Check whether the mount, power supply, diffuser, battery and any light modifier are included with the specific version. | Before I order, I want to know what else I need for my table and lighting set-up. Around 12% of consumers prioritise buying a complete set. |
A quoted light output is based on the manufacturer's measuring set-up and, by itself, does not tell you how evenly your paper will be lit on camera.
Compare the shape of the light, positioning and diffusion, and make a test recording of the whole cutting area.
For the Key Light Air MK.2, Elgato links the stated maximum brightness to having sufficient power and notes that a power adapter is not included.
Check the power requirements and the contents of the box for the exact version.
A directional light source and a panel do not produce the same shape of light. For the amaran 60x S, Aputure recommends a softbox for prolonged light softening.
Before choosing, check which modifier is suitable, how it is mounted and the instructions for your model.
SmallRig gives different battery life figures for the RC 60B Lite Edition at maximum power and in ECO mode.
Compare your expected recording time with the stated operating mode, and check whether your preferred external power supply is supported.
The LC30D and LC30Bi are lamps designed for table use. The LC30Bi is worth considering if you want adjustable light colour alongside window light.
The Key Light Air MK.2 is a desk panel for anyone looking for a mount that attaches to the edge of the table.
The NL660 is a larger, adjustable panel for a set-up with a separate stand or the version supplied with a stand.
The amaran 60x S is a directional bi-colour COB light for a set-up with suitable diffusion.
The RC 60B Lite Edition is a portable bi-colour COB option if you regularly move your lesson set-up.
This selection mainly includes clip-on and desk lamps for additional lighting. It also includes a phone ring light and a camera bundle with an extra LED video light. Check that the mount and light position suit your camera and cutting area. For the exact version, also check the product safety information and which parts are included.
No image available
The clip-on mount and adjustable lamp heads could be useful if you want to position the light on a work table and adjust its direction.
The product name lists three colour modes, dimming, a rechargeable design and flexible goosenecks.
No image available
The clip and adjustable neck may suit you if you want to attach a lamp to the edge of your work table. Check beforehand that the clip fits your table top.
The product name lists three light colours, five brightness levels, stepless dimming, a 1000 mAh battery, USB-C and a 315° rotating clip.
No image available
As well as an LED video light, this bundle includes a DJI Osmo Pocket 4 camera, so it is not a standalone light for an existing camera set-up.
The product description lists an adjustable range of 3200–5500 K for the included Ulanzi VL81.
No image available
The product name specifies a clip-on mount for a desk lamp. Check that the mount and position suit your cutting area and camera.
No image available
This ring light is designed to attach to a smartphone. Check that it is compatible with the camera you use to record your lesson.
The product name lists three colour temperatures from 3000K–7000K and five brightness levels.
No. Start by making a test recording while you cut. If the paper and your hands are clearly visible enough, the existing light may be sufficient. Check the image again if the time of day or weather changes, as daylight can vary.
Make a test recording with the lamp, dimming level and camera settings you plan to use, then play it back. For flicker under a light source in a 50Hz region, Sony lists 1/50 or 1/100 second as possible shutter speeds. What works also depends on the camera and the light source.
Use a suitable modifier and follow the instructions for the exact model. For the amaran 60x S, Aputure recommends using a softbox for prolonged light softening rather than using the soft cloth at full power for extended periods. This is the manufacturer's guidance for that model.
Not necessarily. According to the Dutch Government, consumer purchases are covered by a statutory guarantee, and the seller must provide a solution if a product is faulty. The Netherlands does not have a fixed statutory guarantee period, so check whether paid extra cover actually gives you additional rights.
Applicable European product rules apply to electrical and electronic equipment. According to Business.gov.nl, once the relevant requirements have been met, the manufacturer must affix the required CE marking and draw up an EU declaration of conformity. Business.gov.nl notes that CE marking is not a quality mark. Check the product information for the exact version.