Filming hand movements
You film from above or at an angle and want to stop your hands from repeatedly obscuring the cut line. Nikon describes diffusion as a way to make a light source larger, but the setup still needs to fit your table.
For a paper-cutting lesson at a small table, a compact light can work well if you can mount it outside the cutting area and a test recording shows that the cut line remains clearly visible. A larger diffused panel may be suitable if you want to light a larger sheet and have room for its support; a COB light with a light modifier needs space for the light, support and modifier. Also check the power supply, the exact version and the CE marking on the specific light and any relevant electrical components supplied with it. The Netherlands Food and Consumer Product Safety Authority states that CE marking is compulsory for electrical products.
You film from above or at an angle and want to stop your hands from repeatedly obscuring the cut line. Nikon describes diffusion as a way to make a light source larger, but the setup still needs to fit your table.
You need space for paper, your hands and a camera, so you’re choosing a light that can be mounted safely and securely. Elgato says that mounting accessories for the Key Light Mini are not included; tripod contents vary by version of the NEEWER NL660.
You want colour differences to remain clear on camera, so it’s important to consider both the light and your camera’s white balance. Canon Europe explains that white balance should be set to match the light.
Start by checking the space around the cutting area and how the light can be mounted. Then make a test recording to see whether the light, paper colour and camera settings work for your lesson.
Choose this when: you have little room for a lamp base and can mount the light outside the cutting area. Elgato lists a 1/4″-20 thread for the Key Light Mini.
Things to consider: Elgato says mounting accessories are not included. Test whether the compact light covers the whole sheet of paper.
Choose this when: you want to light a larger work area and have room for the panel support. The NEEWER NL660 comes with a diffuser.
Things to consider: the panel and any stand need room to set up. NEEWER says a stand is included only with the ‘with Stand’ version.
Choose this when: you want to control the direction of the light and have room for the light, support and modifier. The amaran COB 60x S has a Bowens mount for use with various light modifiers.
Things to consider: the light head alone won’t give you a complete tabletop setup. Check that the parts you need will fit outside the camera frame.
| What to consider | What to look for | Who should pay particular attention? |
|---|---|---|
| Shadows from your hands | Film with both hands moving and check the light direction, diffusion and coverage of the cutting area. | If I’m filming the cutting from above, I don’t want my hands to obscure the cut line; around 33% of consumers prioritise a clear view of the cutting action. |
| Table space and mounting | Measure the clear space along the edge of the table and check the clamp, thread, support and box contents for the exact version. | I want to keep the lamp and cables from taking up space needed for paper and scissors; around 27% of consumers prioritise keeping their work area clear. |
| Paper colours | Record the paper under your chosen lighting and adjust the white balance to match. | If I’m teaching with coloured paper, I want viewers to be able to tell the colours apart; around 20% of consumers prioritise accurate paper colour. |
| Uninterrupted recording | Check the power supply and make a test video using your planned brightness and camera settings. | I want to film the whole lesson without a power interruption or distracting bands of light; around 20% of consumers prioritise uninterrupted recording. |
A compact light can take up little table space, but you may need to buy the mounting hardware separately. The light also needs to cover the size of paper you’re using.
Before ordering, check how you’ll mount the light and whether there’ll still be enough room for your hands, scissors and camera.
Elgato says the Elgato Key Light Mini does not include a mounting accessory, so you may need a compatible holder.
The NEEWER NL660 is available both without a stand and with a stand; NP-F batteries are not included.
Check the box contents for the exact version you’re choosing.
Depending on the version, you may still need a stand or NP-F battery.
A specification alone won’t show you how paper colours will look on your camera. LED lighting can also produce bands of light in certain recording conditions.
Make a test video using your own paper, camera, moving hands, dimmer setting and planned recording settings.
The Key Light Mini is a compact light head, while the Key Light Air MK.2 is a larger panel supplied with a desk clamp.
The NL660 is a larger panel for a work area with enough space to set up a suitable support.
The P260C Pro is a panel worth comparing if colour temperature, diffusion and power supply are important to you.
The COB 60x S is a point source with a Bowens mount for a light modifier that you choose separately.
This Joybuy pick is a compact supplementary light for indoor filming at a small workspace. Check that the magnetic mount will suit your setup.
No image available
This compact magnetic light has a built-in rechargeable battery and is designed to provide supplementary lighting for indoor filming. Check that you have a suitable place to mount it.
The included PK13 camera clamp is designed for the DJI Osmo Pocket 3; it is not a general-purpose table mount.
Before buying, check the CE marking on this specific light and any relevant electrical components supplied with it. The Netherlands Food and Consumer Product Safety Authority states that CE marking is compulsory for electrical products.
Position the support outside the cutting area and try angling the light. Film a short clip while moving both hands; the best position will depend on your camera, paper size and table.
No. A CRI rating alone won’t predict how paper colours will appear on your camera. Check the colours in a test recording and set the white balance to match the light falling on your work area.
Make a test recording using your intended dimmer setting and camera settings. Sony explains that LED lighting combined with camera settings can cause flicker or bands of light, so don’t assume that a product specification rules out problems with your particular setup.
Yes. The Netherlands Food and Consumer Product Safety Authority states that CE marking is compulsory for electrical products. Check the marking on the specific light and any relevant electrical components supplied with it; a general brand page doesn’t confirm that a particular unit for sale has been checked.
Before ordering, check whether your chosen version includes a support, a suitable power supply and any batteries you need. If a product doesn’t do what you could reasonably expect under normal use, the seller is responsible for providing a remedy under the statutory consumer rights, according to ACM ConsuWijzer. A manufacturer’s guarantee doesn’t replace those rights.