Who is this advice for?

Artists looking to reduce hand shadows

When you film from above a white drawing surface, your moving hand and the position of the light can affect how clearly your lines and paper show up. Ulanzi recommends starting with two diffused light sources on either side of your work surface.

Creators who want to show the paper’s whiteness and colours

Check the adjustable colour temperature and stated colour rendering of the exact light model. Manufacturer specifications don’t necessarily show how colours will look in your final footage with your camera and white balance settings.

Artists with a small desk

A desk clamp or compact light can be useful when there’s little room for stands. Check in advance that the mount, cables and lights won’t get in the way of your camera or drawing hand.

What should you look for?

LED panel on a desk mount

Best if: you have a fixed, compact drawing space and can position the panel out of the way of your hand.

Trade-off: a single panel may still cast a shadow on the other side of your hand; check the coverage as you draw.

COB light with a diffuser or softbox

Best if: you have room to position the lights around your drawing area and want to shape the light with a modifier.

Trade-off: a bare light source or reflector won’t automatically give you soft, even light; also check the mounting and power requirements.

Small rechargeable camera light

Best if: portability or extra fill light matters more than lighting a large drawing area with a single light.

Trade-off: a compact size doesn’t guarantee even lighting across a full sheet; test the spread in your own setup.

What to consider What to look for Who is this important for?
Hand shadows and coverage Check the coverage across the whole sheet and record a test clip while drawing; see whether there’s room for two light sources or fill light. When I move my hand across the sheet as I draw, I want to avoid shadows repeatedly obscuring my lines. Around 36% of consumers prioritise shadows and even coverage.
Paper whiteness and colours Compare the stated colour temperature and colour rendering for the exact model; check the paper and drawing colours in a test video. If I want to show paper and coloured materials clearly, I consider both the light’s colour and my camera’s white balance. Around 29% of consumers give colour and paper whiteness top priority.
Mounting and workspace Measure the available space and check the clamp range, mounting points and box contents. When my desk is small, I want to mount the light without getting in the way of my camera or drawing hand. Around 21% of consumers choose mainly based on mounting and available workspace.
Power and stable footage Check the model’s power requirements and record a test clip with your own camera to check for possible light banding. For longer recordings, I want to know whether the power supply will last for the session and whether my camera shows light banding. Around 14% of consumers prioritise recording time and stable footage.

Common buying mistakes

  • Choosing based only on lumens, lux or CRI

    A stated value doesn’t tell you how your hand will cast a shadow or how evenly the light will reach your paper. Your camera’s white balance can also affect the colour of white paper.

    As well as checking the specifications, watch a full test clip with your hand in shot and your own camera settings.

  • Assuming a small RGB light will work as your main light

    A portable light won’t necessarily provide even lighting across a full sheet of drawing paper.

    Check the light distribution on your own paper, and don’t use RGB effects as a guide to neutral drawing light.

    Depending on your setup, you may need extra lights or mounts.

  • Assuming the power supply or diffuser is included

    Elgato says that the Key Light Air MK.2 needs a suitable power supply, which isn’t included, to reach full brightness. SmallRig lists the softbox for the RC 60B Lite as optional.

    Before buying, check the exact model, what’s in the box and what you’ll need for your setup.

    A suitable power supply or light modifier may need to be purchased separately.

Brands to compare

Elgato

The Key Light Air MK.2 is a desk panel for a fixed, compact filming setup.

  • Elgato specifies an included desk clamp, adjustable light from 2900–7000 K and a CRI above 94.
  • Elgato says a suitable power supply of 30 W or more is needed for full brightness; it isn’t included. Check the coverage of your drawing area yourself.

Godox

The P260C Pro is a bi-colour panel with a diffuser, designed to be positioned near your drawing area.

  • Godox specifies a colour temperature of 2800–6500 K and average CRI and TLCI ratings of at least 98.
  • These are manufacturer specifications; check the power supply and mounting for your setup, and assess the light distribution on paper.

amaran

The 100x S is an adjustable COB light source for use with separate light modifiers.

  • Aputure specifies a colour temperature of 2700–6500 K and a CRI of 95 for the amaran 100x S.
  • The stated lux figures vary considerably between the bare light and the reflector. Assess the diffuser and positioning separately.

SmallRig

The RC 60B Lite is a portable COB light for setups where a fixed mains power connection isn’t always available.

  • SmallRig specifies a built-in battery and a colour temperature of 2700–6500 K for the Lite Edition.
  • The softbox is optional, and the stated battery life is shorter at maximum power. These specifications apply to the Lite Edition and not necessarily to other RC 60B models.

Ulanzi

The VL49 RGB is a compact battery-powered light for portable use or as additional fill light.

  • Ulanzi lists a 2000 mAh battery and mounting via a 1/4-inch socket or cold shoe.
  • These specifications don’t prove that a single VL49 RGB will light an entire drawing area evenly.

Joybuy products

These compact, rechargeable camera lights are most useful as portable lights or as extra lighting in a small filming space. Record a test clip to check whether they provide enough coverage for your drawing area.

Ulanzi VL81 Rechargeable LED Video Light Black

Ulanzi VL81 Rechargeable LED Video Light Black

A compact, rechargeable video light for a portable camera setup.

Product information lists an adjustable colour temperature of 3200–5600 K and cold shoe mounting.

View at Joybuy
Ulanzi VL49 RGB Video Light with 2000 mAh battery

Ulanzi VL49 RGB Video Light, 2000 mAh

A compact battery-powered light for portable filming or as additional lighting; assess its coverage for a sheet of drawing paper separately.

Product information lists dimming, an adjustable colour temperature of 2500–9500 K and a magnet on the back.

View at Joybuy
Ulanzi VL119 10W RGB Light Wand

Ulanzi VL119 10W RGB Light Wand

A portable RGB light for photo and video shoots; check that its shape and positioning work for your drawing setup.

Product information lists an adjustable colour temperature of 2500–9000 K and a built-in battery. The stated runtime is at least 60 minutes at maximum brightness.

View at Joybuy
Ulanzi LM001 Portable Mini Fill Light with 500 mAh battery

Ulanzi LM001 Portable Mini Fill Light, 500 mAh

A mini fill light for a compact, portable setup; check on your own paper whether it provides enough coverage.

Product information lists a 500 mAh battery, a magnetic base and a 1/4-inch thread. The stated runtime is up to 1.5 hours.

View at Joybuy

Frequently asked questions

Do you need to buy two lights straight away?

Not necessarily: first, test how your hand casts a shadow across the whole sheet. Ulanzi recommends starting with two diffused light sources on either side if a single source leaves an annoying hand shadow.

Why does white paper look yellow or green in your video?

The colour of the light and your camera’s white balance affect how white is captured. Set the white balance for your filming environment and check a test video; a high stated CRI won’t automatically correct an incorrect white balance.

How can you check whether a light causes banding in your footage?

Record a short test clip with your own camera, recording speed and intended light setting, then check it for banding. Sony explains that rapidly changing LED light can cause banding in camera footage; without a test, it isn’t possible to make a reliable claim about a specific light and camera combination.

What should you check besides the light itself?

Check the box contents for the exact model and whether you’ll need a power supply, mount or diffuser. Elgato says the power supply needed to reach full brightness isn’t included with the Key Light Air MK.2; SmallRig lists the softbox for the RC 60B Lite as optional.

Which purchasing rights and markings are relevant in the Netherlands?

According to the Dutch government, many distance consumer contracts come with a 14-day cooling-off period, subject to exceptions. The European Union explains that CE marking only applies to products covered by specific harmonised EU rules; most electrical and electronic equipment also requires a WEEE marking for separate collection. A marking on a sales page does not, by itself, prove that a specific item on offer complies with all applicable rules.