Who is this guide for?

Filming the whole collage from above

If your hands move across the paper and pieces as you work, coverage of the work surface and control of shadows are important considerations. Adobe lists a good light source and a stable camera mount as key elements of flat-lay photography.

Showing paper colours in a product video

If viewers need to distinguish between paper, paint and ink, pay attention to both your lighting set-up and the camera’s consistent white balance. Canon Europe explains that the colour temperature of the light affects how the camera reproduces colour.

Teaching at a small work table

If you need to fit your camera, hands and materials into a small space, make sure the mount and power supply suit your table and filming location.

What should you look for in video lighting?

Start with the space around your table and the position of your camera. Then decide how much control you need over shadows and colour.

Consideration What should you check? Who is this important for?
Work surface and hand shadows Test the coverage and direction of the light as your hands move across the whole collage; check whether a diffuser or second light source will fit. If you film from above and your hands could obscure details, you’ll want to keep the whole work surface visible. Around 36% of consumers prioritise controlling coverage and hand shadows.
Paper colours Check the adjustable colour temperature range of the exact light and record test clips with a fixed white balance. If you want paper, paint and ink to look recognisable, a consistent filming set-up helps you assess colour reproduction. Around 29% of consumers prioritise colour consistency.
Set-up space Measure the edge of the table and the space outside the frame; check that a clamp or stand will fit the table and provide the required angle for the light. If you have limited room for your camera, hands and materials, you’ll want to mount a light without blocking the work table. Space and mounting are the main considerations for around 21% of consumers.
Power during filming Check which adapter or battery is required, what’s included with the version you’ve chosen and whether the cable will work with your set-up. For long filming sessions, you’ll want to know whether your chosen light can run on the power supply available. A short test clip also helps you check your camera settings. Around 14% of consumers prioritise power and uninterrupted filming.

Buying pitfalls

  • Assuming a COB light’s lux rating tells you how much light will reach your collage

    A measured value depends on the measuring distance and the light modifier used. Godox gives the lux rating for the SL60IIBi at 1 metre with the standard reflector; this value doesn’t automatically apply to a set-up with a softbox.

    Only compare light measurements taken under the same conditions, and check that the light, modifier and stand are compatible.

    You may need to buy a compatible softbox and possibly a stand separately.

  • Assuming accessories are included with every version

    What’s included varies by model and version. For example, Elgato says the Key Light Air MK.2 requires a suitable USB-C power supply for maximum brightness, which isn’t included.

    Before buying, check the box contents, required power supply and mounting options for the exact version.

    Depending on the light and version, you may also need a battery, adapter or mount.

  • Relying on a CRI or colour temperature claim alone

    The camera’s white balance and the light falling on the paper both affect the colours in your footage. A stated light rating doesn’t guarantee the final image.

    Record a test clip with the paper you use and keep the white balance consistent before filming a full lesson.

Brands to compare

NEEWER

The NL660 is an adjustable LED panel. The product range described includes a single-panel version and a set with two panels and stands.

  • NEEWER says the two-panel set has a colour temperature range of 3200–5600 K per panel and includes diffusers. The two light sources can be positioned separately.
  • NP-F batteries aren’t included. If you’re buying a single NL660, check whether the version you’ve chosen includes a stand. These are manufacturer specifications, not the result of an independent filming test.

Elgato

Elgato describes the Key Light Air MK.2 as a compact panel with a desk clamp for a permanent filming set-up.

  • Elgato lists adjustable lighting from 2900–7000 K and a clamp for desks up to 6 cm thick.
  • The stated brightness depends on the power supply. Elgato says a suitable USB-C adapter for maximum brightness isn’t included; also check whether one light source will cover the whole collage.

amaran

The P60x is a bi-colour panel. The manufacturer lists a softbox and grid as included with the set.

  • amaran lists a colour temperature range of 3200–6500 K for this version, along with an included softbox.
  • A light stand isn’t listed among the stated box contents. Check whether your set-up needs a separate stand.

Godox

The SL60IIBi is a COB video light with a Bowens mount, designed to be used with a compatible light modifier.

  • Godox lists dimming control and an adjustable range of 2800–6500 K. The brand also describes a separate SB-FW6060 softbox measuring 60 × 60 cm.
  • The stated light output was measured with a standard reflector at 1 metre. Don’t assume this value applies to a set-up with a softbox.

Video lighting at Joybuy

This selection includes LED video lights, a ring light and a camera bundle with a light. Compare the listed lighting settings, mounting options and power requirements with the space and camera set-up you use.

COLBOR 200W bi-colour COB LED video light with Bowens mount

COLBOR 200W bi-colour COB video light with Bowens mount

The listed Bowens mount may be useful if you want to use a compatible light modifier in your set-up.

The product name lists 200 W, bi-colour 2700–7000 K, COB, a Bowens mount and a built-in power adapter design.

View at Joybuy
10-inch ring light with remote control and tripod

10-inch ring light with remote control and tripod

A ring light may suit you if you’re looking for a central camera mount; use a test clip to see how the light falls on your collage.

The product name lists a 63-inch tripod, a remote control, three colour modes and ten brightness levels.

View at Joybuy
COLBOR 60W portable RGBCW COB video light with built-in battery

COLBOR 60W portable RGBCW COB video light

The product name mentions a built-in battery; check that the stated power supply suits the length and location of your filming sessions.

The product name lists 60 W, a built-in 59 Wh battery, bi-colour 2700–6500 K and full-colour settings.

View at Joybuy
Ulanzi VL81 rechargeable LED video light, black

Ulanzi VL81 rechargeable LED video light, black

The title describes a rechargeable light; before filming, check how you’ll mount it with your camera and table set-up.

The product name lists model VL81, a rechargeable LED video light and the colour black.

View at Joybuy
DJI Osmo Pocket 4 Standard Combo with Ulanzi VL81 LED video light

DJI Osmo Pocket 4 Standard Combo with Ulanzi VL81

This bundle may be a good fit if you’re looking for the camera and the listed LED light; check that the combination works with your existing filming set-up.

The product name lists the DJI Osmo Pocket 4 Standard Combo and a Ulanzi VL81 LED video light.

View at Joybuy

Frequently asked questions

Do I need one light or two for a collage lesson?

Start with the size of your work surface and record a test clip as you move your hands. One well-positioned, diffused light source may be enough. Consider a second, separately positioned light if your hands obscure important steps and there’s room for both mounts.

How can I keep paper colours consistent between lessons?

Keep your lighting set-up as consistent as possible and set your camera’s white balance to suit the light you’re using. A stated colour temperature or CRI isn’t a measurement of how the paper will ultimately look on your camera.

What should I check when setting up and before filming?

Measure the edge of the table and the available set-up space, check the power supply and box contents against your set-up, and follow the manufacturer’s instructions for use and safety. Record a test clip using your chosen camera settings before filming a full lesson.

What extra items might I need?

Depending on the model and version, you may need a stand, softbox, battery or suitable USB-C adapter. Check the box contents and power requirements for the exact version before choosing your set-up.

Is CE marking required for an electric video light in the Netherlands?

This depends on the product rules that apply to the light and its power supply. The NVWA describes a requirement for electrical equipment covered by the applicable Dutch rules; the Low Voltage Directive has a defined scope of 50–1.000 V AC and 75–1.500 V DC. The European Union explains that CE marking is only required when harmonised EU rules specify it for the product. So check the exact version and the rules that apply; CE marking is a declaration made by the manufacturer.