Teacher with a permanent writing desk
Films from directly above or at an angle over the writing surface, and wants to minimise hand shadows so brushstrokes are easy to see.
For a permanent writing desk, an adjustable panel is usually more practical than a small camera light. If your hand often blocks the light, consider a set of two panels. A compact light is better suited to a portable setup or when you only want to add light to a small area of the paper. Set up the camera and lighting together: Sony suggests shutter speeds of 1/50 or 1/100 second on a 50Hz mains supply as a possible way to reduce flicker, but the result depends on the camera and light source.
Films from directly above or at an angle over the writing surface, and wants to minimise hand shadows so brushstrokes are easy to see.
Combines video lighting with ceiling or work lights and wants to avoid distracting bands and changes to paper or ink colours during filming.
Films in different locations and weighs compact power and easy mounting against having enough light on the writing surface.
Best for: a permanent writing desk where you can position and angle the panel beside the camera.
Consider: a single panel can still cast a noticeable hand shadow; check with a test recording.
Best for: a setup where one light does not sufficiently reduce shadows from your writing hand and there is room for a second light source.
Consider: you’ll need more space to set everything up, and should check the power supply and any additional batteries required.
Best for: a portable setup or when you only want to add light to a small area of the paper.
Consider: a small light may not illuminate a larger writing surface as evenly; battery life depends on the brightness setting.
| What to consider | What to look for | Who should pay particular attention? |
|---|---|---|
| Hand shadows | Check whether you can angle the panel and whether a diffuser and stand are included; review the whole writing surface in a test recording. | When I film from above, I want to see my pen strokes even as my hand moves across the paper. Around 36% of consumers say controlling hand shadows is their top priority. |
| Flicker and bands | Record a test clip with all the lights on. For a 50Hz mains supply, Sony suggests 1/50 or 1/100 second as possible shutter speeds; check the results with your camera and lighting. | When using artificial light, I want to avoid bands disrupting my lesson recording. Around 29% of consumers say reducing flicker is their top priority. |
| Paper and ink colours | Check the adjustment range of the exact light and assess the paper and ink in a test image using the lighting you plan to film with. | If viewers need to assess the colour of my paper and ink, I want them to be clearly recognisable under my recording lights. Around 21% of consumers say colour rendition is their top priority. |
| Setup and power | Check what’s included, such as an adapter, diffuser, stand and battery. Only compare battery life when the brightness settings are specified. | When I film in different locations, I want to be able to carry and connect the light easily. Around 14% of consumers say portability is their top priority. |
Shutter speed and other artificial light sources can also affect whether bands appear. A claim about a light does not tell you how the complete camera and lighting setup will perform.
Before a long lesson, record a test clip using the camera settings you intend to use and all the lights that will be on while filming.
A failed recording could mean filming again or switching off existing lights.
The NEEWER set reviewed lists adapters and stands, but NP-F batteries are not included.
Compare the contents of the exact version with how you plan to power and position the light.
Ulanzi lists a maximum of 9000 K for the VL49 RGB, while a Joybuy listing gives 9500 K. These figures do not confirm that it is the same version.
Before buying, check the full model name and key specifications of the item on offer.
The NL660 is an adjustable bi-colour panel. A set with two panels, diffusers and stands is also available for a permanent desk setup.
The P260C Pro is a diffused bi-colour panel for anyone who wants to move and adjust a single light source.
The P60x is an adjustable bi-colour panel for a permanent filming setup where colour adjustment matters.
The VL49 RGB is a compact option for a small or portable setup.
This selection of Joybuy products includes compact camera lights and a COB studio light. Before choosing, decide whether the light can illuminate the whole writing surface, and check what power and mounting equipment is included with each item.
Image unavailable
A portable camera light to consider if you want a mobile video setup; check that it provides enough coverage for your entire writing surface.
The product name specifies RGB and a portable LED video light.
Check the applicable CE marking on the specific item.
Image unavailable
A portable video light to consider if you need to take your lighting with you; use a test recording to see whether your setup sufficiently illuminates the paper and your moving hand.
The product name specifies 60 W, RGB, 345 g and continuous lighting.
Check the applicable CE marking on the specific item.
Image unavailable
A COB studio light to consider for a permanent setup; check which light modifier and mount will work with your filming position.
The product name specifies 200 W, 2700–7000 K, a built-in power adapter and a Bowens mount.
Check the applicable CE marking on the specific item.
Image unavailable
A rechargeable video light to consider for portable filming; check that its coverage suits the size of your writing surface.
The product name specifies a rechargeable LED video light.
Check the applicable CE marking on the specific item.
Image unavailable
A compact camera light to consider if you move your setup often; check that it provides enough coverage for your writing surface.
The product name specifies a 2000 mAh battery, 2500–9500 K and a magnet on the back.
The product information states that the light is not waterproof. Also check the applicable CE marking on the specific item.
Start by recording a test clip with all the lights that will be on during the lesson. For a 50Hz mains supply, Sony suggests 1/50 or 1/100 second as possible shutter speeds to reduce flicker; the result depends on your camera and the light sources you use.
Not always. First, record the whole writing surface with one panel. If your hand obscures important strokes, you could add a second light source as fill light. The NEEWER set reviewed lists two panels and two stands.
The Netherlands Food and Consumer Product Safety Authority states that the applicable CE marking is required for electrical consumer products. Check the marking and product information for the specific item; a CE marking does not automatically mean it has undergone independent testing.
According to ACM ConsuWijzer, online consumer purchases usually come with a 14-day cooling-off period after delivery. The seller is also responsible for putting things right if the product does not meet what you could reasonably expect; a commercial guarantee does not replace this statutory right.
Check the mount and cable before filming, and follow the manual for the exact model when cleaning it. The amaran P60x manual advises disconnecting the light before cleaning and recommends a dry microfibre cloth; for another light, follow its own manual.