Who is this relevant to?

Bookbinder filming their work

You film from above or at an angle, focusing on your hands, and want to fill in the shadows on the side away from the window without obscuring your work. Canon Europe describes using fill light on the opposite side as a way to reduce shadows created by the main light.

Teacher showing material colours

You want paper and covering materials to look true to life on camera, and need control over colour temperature and white balance. Canon Europe recommends setting the white balance to suit the lighting conditions.

Maker with a small filming table

You need to leave room for your book, tools and camera, so you’re comparing a table clamp or compact light with a separate stand. Check that the chosen mount fits your table and can reach across the work surface.

What should you look for when buying?

Start by considering where the light will sit in relation to the window and the book. Then assess its spread, colour settings and how much space the mount takes up.

What to consider What to look for Who is this most important for?
Keeping your work visible Check that the light, diffuser and positioning can cover the work surface. Dimming makes it easier to balance the fill light with the window light. When filming above the book, I want to see my hands and fold lines without shadows hiding the details. Around 36% of consumers prioritise keeping their work visible.
True-to-life material colours Check the adjustable colour temperature of the exact model and assess a test shot using your camera and materials. I want the paper and covering materials to look true to life with a mix of window and artificial light. Around 29% of consumers give colour reproduction their highest priority.
Keeping the work surface clear Check the dimensions and mounting method of the light and any stand, and test whether the light covers the whole book. On a busy table, I want to be able to leave the book, tools and camera in place. Around 21% of consumers consider making room the most important factor.
Recording time and noise Check the power supply or battery life at your chosen brightness, and listen during a test recording from the microphone position. When giving spoken instructions, I want to record the lesson without an inconvenient interruption or audible fan noise. Around 14% of consumers focus mainly on power, recording time and noise.

Pitfalls to avoid

  • Comparing lux figures without checking the test setup

    A figure for a bare light or reflector doesn’t automatically tell you how much light a softbox will put on your book. Distance and the light modifier affect the comparison.

    Only compare figures measured at the same distance and with the same type of light modifier. Also check which accessories are included with the version you’re considering.

  • Assuming a small light will cover the whole work surface

    Ulanzi states that the VL49 RGB delivers up to 800 lux at 0.5 m. That figure doesn’t show how evenly it will light an entire bookbinding table.

    Work out the size of the area you’ll be filming and test the light distribution before choosing this light for a full lesson.

  • Assuming every version is ready for a long recording session

    Power, mounting and included accessories vary by setup. The NL660 kit described by NEEWER does not include batteries.

    Check what’s included with the exact version, along with its power requirements and mounting options, and make a test recording with your planned setup.

Brands to consider

NEEWER

The NL660 is a bi-colour panel option. The kit described includes two panels, diffusers and stands.

  • NEEWER says the kit offers adjustable colour temperature from 3200–5600 K and dimming.
  • Check whether you need a kit with two panels. The batteries described are not included.

amaran

The 100x S is a bi-colour COB light for anyone looking for a standalone light to use with a carefully chosen modifier.

  • Aputure specifies an adjustable range of 2700–6500 K for the 100x S.
  • The lux figures differ for the bare light and the included reflector, and don’t describe a softbox setup. Aputure states that it has active cooling.

Godox

The SL60IIBi is a bi-colour COB option if a Bowens light modifier is part of your planned setup.

  • Godox specifies an adjustable range of 2800–6500 K and a Bowens mount.
  • The stated 25.100 lux at 1 m applies with the standard reflector. Assess your final setup and the cooling noise separately.

Elgato

The Key Light Air MK.2 is a panel with a desk clamp, suited to a workspace where it’s difficult to position a floor stand.

  • Elgato specifies an adjustable range of 2900–7000 K and up to 2100 lumens, depending on the power source.
  • Check the edge of your table, mounting height and coverage over your book. The stated light output doesn’t prove that the work surface will be lit evenly.

Ulanzi

The VL49 RGB is a small rechargeable light to consider for close-up details or as an additional fill light.

  • Ulanzi lists a 2000 mAh battery and up to 800 lux at 0.5 m.
  • The measurement distance and compact size don’t tell you how well it will light a larger work surface. Don’t confuse this model with the differently specified VL49 Pro.

Video lights at Joybuy

This selection includes compact video lights, smartphone ring lights and a clamp light. Check that each model’s light spread and mounting method suit your bookbinding work surface.

Ulanzi VL81 rechargeable LED video light, black

Ulanzi VL81 rechargeable video light, black

An option to consider if you film with a smartphone and want a light that can attach to it.

The product information lists three colour temperatures and five brightness levels.

View at Joybuy
Ulanzi VL49 RGB video light with 2000 mAh battery

Ulanzi VL49 RGB, 2000 mAh, 2500K–9500K

A compact option for close-up fill light; the stated light output doesn’t describe how it will illuminate an entire bookbinding table.

The product title lists a 2000 mAh battery, dimming, a rear magnet and a range of 2500K–9500K. Ulanzi states that it delivers up to 800 lux at 0.5 m.

View at Joybuy
Ulanzi 4-inch ring light for smartphones

Ulanzi 4-inch smartphone ring light

An option for smartphone filming, with the light attached to your phone. Check that it doesn’t obstruct your view of the work.

The product title lists three colour temperatures from 3000K–7000K and five brightness levels.

View at Joybuy
Ulanzi VL119 10W RGB light wand

Ulanzi VL119 10W RGB light wand

A portable light wand to consider if you want a tripod mount and adjustable colour. Check how the light falls on your work surface in a test recording.

The product information lists a range of 2500K–9000K, CRI 95, a built-in battery and a 1/4-inch mount.

View at Joybuy
Aigostar rechargeable LED clamp light, black

Aigostar rechargeable LED clamp light, 4000K

A clamp light to consider for a small work table. Check that the clamp fits and that the adjustable lamp base can reach the book.

The product title lists three light settings, 4000K, 2,5 W and 160 lm. The colour temperature is not described as an adjustable range.

View at Joybuy

Frequently asked questions

Where should I position a light when filming by a window?

Use the window as your main light if it makes the book easy to see, then try adding light on the shadow side. Take a test shot to check that your hands aren’t hiding details, and adjust the position and brightness as needed. Canon Europe describes this as using key and fill light; the best position depends on your space.

Why does white paper change colour while I’m filming?

A camera may record light sources with different colour temperatures differently from the way your eye sees them. Take a test shot using the actual combination of window and artificial light, then set the white balance accordingly. Canon Europe describes setting the white balance as a way to adjust colour reproduction in challenging lighting conditions.

What should I check about mounting and power?

Check that the clamp fits your table, or that you can position a stand outside the work area. Also check which power supply and light modifier are included, and whether the version you’ve chosen requires a separate battery. Follow the model’s instructions for use and cleaning.

Do I need to buy an extra manufacturer’s warranty in the Netherlands?

No. Buying an extra manufacturer’s warranty is not a requirement for your statutory rights when making a consumer purchase. According to ACM ConsuWijzer, the seller remains responsible if a product doesn’t do what you could reasonably expect during normal use. This doesn’t mean that every video light has one fixed statutory warranty period.

What rules apply to electrical video lights sold in the Netherlands?

Businesses that place electrical equipment on the market or trade in it must comply with the applicable European rules, as explained by the Dutch Ondernemersplein. The requirements for CE marking and an EU declaration of conformity depend on the rules that apply to the specific product and its power supply. A seller’s statement alone does not confirm that an individual light is compliant.