Teacher demonstrating cutting lines
If you film from above while your hands and scissors move over the paper, consider the direction and softness of the light so the action stays visible. Adobe explains how diffused light can soften harsh shadows.
For a paper-cutting lesson, choose a light that you can position outside the overhead camera’s view and test across the entire work surface while your hands are moving. A diffused panel, a panel with a desk clamp and a COB light with a separate modifier each need a different setup. Choose one to suit your space, mounting options and power supply. Diffused light can soften harsh shadows, as Adobe explains, but be sure to check the white balance and look for any banding in a test recording made with your own camera.
If you film from above while your hands and scissors move over the paper, consider the direction and softness of the light so the action stays visible. Adobe explains how diffused light can soften harsh shadows.
If you want white and coloured paper to look true to life on camera, look for adjustable colour temperature and set a fixed white balance on your camera. Canon Europe explains that white balance affects how colours are captured under different lighting.
If you need to fit a light, camera, hands and paper into a small space, measure the table edge and available height, and check the mount, cable and power supply in advance. For example, Elgato specifies a desk clamp for tables up to 6 cm thick for the Key Light Air MK.2.
First, check where you can position the light outside the camera’s view. Then make a test recording with your hands moving to assess the light coverage, paper colour and any banding.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Shadows on the cutting line | Check that the light can be directed where you need it, and consider the diffuser and coverage across the whole sheet of paper. Film with both hands in view. | If I want the cutting line to stay visible while my hands are moving, I test the light across the entire work surface. Around 33% of consumers prioritise minimising shadows on the cutting line. |
| Paper colours under artificial light | Check the colour temperature range of the exact model and record a test with a fixed white balance. | If I want white and coloured paper to look consistent in consecutive recordings, I consider both the light colour and the camera’s white balance. Around 27% of consumers prioritise accurate colour reproduction. |
| Space and mounting | Measure the table edge and available height. Check whether the set you’ve chosen includes a stand or clamp. | If my workspace is small, I want to know where the light and camera can go without getting in the way of filming. Around 20% of consumers prioritise available space and mounting options. |
| Flicker and power supply | Test with your own camera. For a USB-C model, check the required power and the options for powering it during longer recordings. | If I want to film a lesson in one continuous take, I check that the power supply is suitable and that no banding appears. Around 20% of consumers prioritise stable recordings and a suitable power supply. |
Light measurements can depend on distance and the light modifier used. Aputure gives measurements for the amaran 100x S under different conditions, while Elgato notes that the Key Light Air MK.2’s output depends on the available power supply.
Compare the test conditions and included accessories, and assess a test recording of the entire work surface.
A COB light may also need a separate modifier and a suitable mount, so check what your setup requires.
What’s included varies by version. The NEEWER NL660 is listed in sets both with and without a stand, and an NP-F battery is not included. Elgato says that the Key Light Air MK.2 needs a suitable power supply for full light output; this is not included in the listed box contents.
Before choosing, check the exact set contents, mounting options and power requirements.
Depending on the model and version, you may need to buy a stand, battery or suitable power adapter separately.
Your camera captures colours under the lighting that’s available. A stated colour rendering figure is no substitute for setting and testing the white balance.
Keep the lighting setup the same and make a test recording of the paper you’ll use in your lesson.
The NL660 is an adjustable bi-colour LED panel for anyone who wants to direct light towards the work surface from the side. The manufacturer lists versions both with and without a stand.
The Key Light Air MK.2 is designed for a desk setup, with a clamp and USB-C power.
The P260C Pro is a diffused bi-colour panel with several power options listed by Godox.
According to Aputure, the amaran 100x S is a bi-colour point light source for anyone who wants to choose their own modifier.
This selection includes different video lighting setups, from a COB light with a modifier to a ring light or compact light wand. Make a test recording to check whether your chosen setup captures the paper and your moving hands clearly.
No image available
An option if you want to use a separate modifier when filming.
The product name specifies 200W, bi-colour 2700K–7000K and a Bowens mount.
No image available
The product description lists video tutorials and online teaching as possible uses. Make a test recording to see how the light falls on your work surface.
The product name specifies a 63-inch stand and remote control. The description lists 3 colour temperatures and 10 brightness levels.
No image available
A portable light source to consider if you want to adjust the lighting position while filming.
The product information lists 10 W, RGB control, an adjustable range of 2500–9000 K and a 1/4-inch connection for a tripod or light stand.
Make a short overhead recording while moving both hands and the scissors. Move or soften the light if a hand obscures the cutting line. A diffuser can soften shadows, but the result depends on your setup.
Adjust your camera’s white balance to suit the lighting and make another test recording. If you see bands, Sony lists shutter speeds of 1/50 or 1/100 second as possible settings in areas with a mains frequency of 50 Hz. According to Netbeheer Nederland, the Dutch low-voltage electricity network has a frequency of 50 Hz. This does not guarantee a band-free result with every combination of light and camera.
Check the contents of the exact version and its power requirements. Whether the NEEWER NL660 set includes a stand depends on the version, and an NP-F battery is not included. For the Elgato Key Light Air MK.2, Elgato lists a suitable power supply for full light output, which is not included in the stated box contents.
According to ACM ConsuWijzer, the statutory guarantee applies alongside any manufacturer’s or seller’s guarantee. If a product breaks earlier than you could reasonably expect during normal use, the seller must offer a solution under the applicable terms. There is no single fixed period that applies to all video lights.
According to the Dutch government, CE marking is mandatory for product groups covered by the relevant EU rules, and the mark must not be placed arbitrarily on other products. Check the specific model and version. A brand name alone does not confirm that the relevant rules have been followed.