Who is this guide for?

Makers who want to show cutting lines clearly

You’re filming a sheet of paper while your hands are moving, and want to make sure shadows or uneven lighting don’t obscure the steps.

Makers who explain paper colours

You use paper in different colours and want them to look consistent from one shot to the next. So pay attention to the light colour and your camera’s white balance.

Makers with a temporary workspace

You want to clear the table after your lesson, and need to know how much room the light, its mount and its power supply will take up.

What should you look for when buying?

Start by considering coverage across the whole sheet and where your hands will be. Then weigh up colour reproduction, space around the table and power options.

What to consider What should you check? Who is this important for?
Visible cutting lines Film the whole sheet while moving your hands; check the direction of the light and whether a diffuser or light modifier is included with that version. If your hands block the light as you cut, you’ll want the lines to remain visible on camera. Around 36% of consumers put shadow control first.
Paper colours Check the colour temperature range and record a test using your own paper with the white balance set. If you use paper in different colours, you’ll want them to remain recognisable in the footage. Around 29% of consumers prioritise colour accuracy.
Space and mounting Measure the free space on your table and check the clamp, mounting points, stand and cables included with the set you’re considering. If you need to clear the table after your lesson, you’ll want to know how much room the light takes up and how to store it. Around 21% of consumers put set-up space first.
Power and banding Check the power requirements and included power supply; test the light with your own camera, brightness level and recording settings. If you want to use the light with a particular power source or avoid banding in your footage, it’s important to test it with your own equipment. Around 14% of consumers prioritise power or banding.

Things to watch out for when buying

  • Don’t assume every Ulanzi VL49 is the same version

    There’s a VL49 with fixed white light and a separate VL49 RGB. The model name alone doesn’t make the two versions interchangeable.

    Compare the full version name and key specifications before you choose.

  • Don’t assume every USB-C power supply will deliver maximum brightness

    Elgato states that the maximum light output of the Key Light Air MK.2 depends on the power available.

    Check the output of your power source and what’s included with the version you’re buying.

    Depending on the power source you use, you may need a suitable separate adapter or power bank.

  • Don’t confuse the battery in the controls with battery power for the Godox ES45 Kit

    The manual distinguishes between the light’s mains power supply and the built-in battery in the detachable control unit.

    If you want to film without a mains socket, check which component runs on battery power.

  • Don’t assume a light or panel set includes every modifier and stand

    The amaran COB 60x S uses compatible light modifiers; the NEEWER NL660 is available as a light on its own or in a version with a stand.

    Check the contents of the exact set before planning your set-up.

    You may need to buy a suitable light modifier or stand separately.

Brands and models to consider

NEEWER

The NL660 is an adjustable bi-colour LED panel. NEEWER offers it as a light on its own or in a version with a stand.

  • NEEWER lists a diffuser, an adjustable colour temperature of 3200–5600 K, and power via an adapter or a suitable battery, available separately.
  • Check what’s included and test the coverage on your own work surface; stated light and colour values come from the manufacturer.

Godox

According to the manual, the ES45 Kit is an adjustable panel for a desk set-up, with a detachable control unit.

  • The manual lists a colour temperature range of 2800–6500 K and an included mains adapter.
  • The built-in battery powers the control unit; don’t assume the light itself runs on battery without the mains adapter.

Elgato

Elgato describes the Key Light Air MK.2 as designed for a desk set-up, with a clamp and USB-C power.

  • Elgato specifies 2900–7000 K, a CRI above 94 and a clamp for desks up to 6 cm thick.
  • According to the technical specifications, at least 27 W of available power is needed for the maximum stated light output. Check the power supply and make sure you distinguish the MK.2 from the older Key Light Air.

amaran

The COB 60x S is a bi-colour point-source light with a Bowens mount for compatible light modifiers.

  • According to amaran, the Bowens mount lets you choose compatible modifiers to direct or soften the light on the paper.
  • Consider the chosen modifier, mount and space requirements separately; the manufacturer’s claims about colour performance aren’t an independent assessment of your footage.

Ulanzi

The VL49 with fixed white light is a small rechargeable video light for a portable set-up; the VL49 RGB is a different version.

  • According to Ulanzi, the white-light VL49 has a built-in diffuser, dimmer and USB-C charging.
  • The stated illumination depends on the measuring distance. So check whether a single small light will cover your work surface well enough.

Joybuy products

These Joybuy products are mainly suited to portable video set-ups and adjustable lighting. For each version, check that the mounting, power supply and light coverage are right for filming a whole sheet of paper.

MOMAN PC8 RGB portable video light

MOMAN PC8 RGB portable video light

This portable version has a built-in battery and may suit a set-up you move around. The product information lists adjustable colour temperature and brightness, 1/4-inch mounts and a cold-shoe adapter.

View at Joybuy
Ulanzi VL81 rechargeable LED video light

Ulanzi VL81 rechargeable LED video light

This rechargeable LED video light may suit a portable video set-up.

View at Joybuy
Ulanzi VL49 RGB video light

Ulanzi VL49 RGB video light

This compact RGB version may suit you if you want to adjust the colour temperature and brightness; it’s not the same version as the VL49 with fixed white light. The product title lists a 2000 mAh battery, dimming, 2500 K–9500 K and a magnet on the back. Don’t use the light in damp conditions or with a fast charger above 5 V.

View at Joybuy
Ulanzi 4-inch clip-on ring light

Ulanzi 4-inch clip-on ring light

This clip-on version is designed for filming on a phone and may suit a smartphone set-up. The product title lists three colour temperatures from 3000 K–7000 K and five brightness levels.

View at Joybuy
Ulanzi VL119 10W RGB light wand

Ulanzi VL119 10W RGB light wand

This rechargeable light wand may suit a portable set-up where you want to mount the light on a support. The product information lists 10 W, adjustable CCT from 2500 K to 9000 K, a 1/4-inch thread and a 120° beam angle. At maximum brightness, the stated run time is at least 60 minutes; the stated weight is around 202 g.

View at Joybuy

Frequently asked questions

Where should I position the light if my hands cast shadows over the cutting lines?

Try repositioning the light and record a test while actually cutting. If the edge of the shadow is distracting, try a larger effective light source with a suitable diffuser or modifier, and check that the whole sheet remains visible.

Is a high CRI enough to ensure accurate paper colours?

No. A high CRI alone doesn’t guarantee how paper colours will appear in your footage. Canon Europe explains that white balance affects colour reproduction, so film your own paper under the lighting you’ve chosen and adjust the white balance accordingly.

What can I do if my video has banding?

Record a test using the brightness and camera settings you plan to use during the lesson. Canon Europe explains how electronic sensor readout captures the image frame by frame, while ERCO points out that LED light flicker can show up in video. So assess the combination of light, camera and settings.

What should I check about included parts and my buying rights?

For each version, check whether a stand, clamp, adapter, battery or light modifier is included. According to the Dutch government, for a typical online purchase from a business, consumers often have a 14-day cooling-off period. You’re also entitled to a product that matches the agreement; there’s no fixed statutory warranty period in the Netherlands.

What safety rules apply to an electric video light sold in the Netherlands?

The applicable EU product rules depend on the product. Where those rules require CE marking, it must be present. The European Union and the Dutch government explain that CE marking isn’t an independent test certificate; check the product information and the applicable conformity requirements for the specific version.