Who is this choice relevant to?

Artists with a permanent filming desk

You film a full sheet of paper from above and want to position the light and camera so that shadows from your hand and reflections don’t overwhelm the drawing.

Drawing instructors focused on colour

You show drawing colours under existing artificial lighting and want to match the colour of the light to your camera’s white balance.

Artists with a small or changing workspace

You need to move or store the light, so you’re weighing up its size and power supply against how much of your drawing area you want to illuminate.

What should you look for when buying?

First, check that the light source, table, camera and position of your hand allow the whole sheet of paper to remain clearly visible in the frame. Then compare colour settings, performance when filming, and the space and power supply required by your chosen setup.

What to consider What to look for Who is this important for?
Evenly lit drawing area Measure the paper and check the positioning and diffuser. Record a test while moving your hand across the whole sheet. If you want every line to stay visible as you draw, pay particular attention to light coverage; around 36% of consumers give this need top priority.
Colour under artificial light Compare the adjustment range of the exact light model and check your footage using a white surface and the selected white balance. If you want drawing colours to look recognisable alongside existing artificial light, colour rendition is key; around 29% of consumers put this need first.
Flicker in the footage Test using the dimmer setting, shutter speed and frame rate you’ll actually use. For light associated with a 50Hz power supply, Sony lists 1/50 or 1/100 second as possible shutter speeds, not as a guarantee. If you want to avoid visible bands in your footage, check how the light and camera work together; around 21% of consumers consider this their main priority.
Space and portability Check the mounting options, available space, power supply and operating time at the brightness you need. If you work at a small table or move the light often, a suitably compact setup matters most; around 14% of consumers put this need first.

Buying pitfalls

  • Assuming a lux rating means the whole sheet will be covered

    The stated lux rating for the amaran 100x S applies with a specific reflector, distance and colour setting. It doesn’t tell you how evenly your paper will be lit.

    Compare the light modifier and mount separately, then assess the whole sheet in a test recording.

    You may need a separate diffuser, softbox or mount to achieve the spread of light you want.

  • Assuming a stand and power supply are always included

    NEEWER offers the NL660 with or without a stand, according to the manufacturer; the NP-F batteries mentioned are not included.

    Check what’s in the box for the exact version before you choose.

    You may need to buy a stand or a compatible NP-F battery separately.

  • Choosing a small RGB light as the main light for a large sheet without testing it

    The Ulanzi VL49’s maximum brightness is stated at 0.5 m. This doesn’t show whether one light will illuminate your entire sheet of paper evenly.

    Measure the area you’ll be filming and make a test recording before using the light as your main source.

    A second light source or a different setup may be needed for a large sheet.

  • Assuming a USB-C panel will reach its maximum light output

    Elgato states that the Key Light Air MK.2’s maximum light output depends on having sufficient input power.

    Compare the power supply required with what you already have and what’s included in the chosen package.

    You may need a compatible USB-C power supply.

Brands to compare

NEEWER

The NL660 is an adjustable LED panel for anyone who wants to direct light onto a permanent drawing desk.

  • NEEWER says the NL660 has a diffuser, 0–100% dimming and an adjustable colour temperature of 3200–5600 K; the manufacturer states CRI ≥96.
  • Check whether the version you choose includes a stand. The NP-F batteries mentioned are not included.

Godox

The ML60II Bi is a compact COB light for a setup using compatible Godox light modifiers.

  • Godox specifies a colour temperature of 2800–6500 K and average ratings of CRI ≥96 and TLCI ≥97.
  • Godox specifies an adapter for Bowens modifiers; the standard accessory mount is not the same as a Bowens mount.

amaran

The 100x S has a COB light source with a Bowens mount, giving you the flexibility to choose a suitable modifier.

  • amaran specifies a colour temperature of 2700–6500 K, CRI 95+ and TLCI 97+.
  • The stated maximum lux rating is measured with the Hyper-Reflector at 1 m and 5600 K. A softbox is not listed among the box contents.

Elgato

The Key Light Air MK.2 is a panel with a desk clamp, designed for a workspace with a suitable desk edge.

  • Elgato specifies 2900–7000 K, a CRI above 94 and an included desk clamp.
  • According to Elgato, maximum stated light output depends on the power supply; a power adapter is not listed among the box contents.

Ulanzi

The VL49 RGB is a small rechargeable light for a limited work area or as an additional light source.

  • Ulanzi lists a 2000 mAh battery and a maximum of 800 lux at 0.5 m.
  • The stated brightness at that distance doesn’t show that one light will evenly illuminate a whole sheet of paper. Also check the colour temperature of the exact version.

Video lights at Joybuy

This selection includes video lights for filming drawings, including compact models and COB lighting. Make a test recording to see whether your chosen light source illuminates the whole drawing area evenly.

COLBOR W60R RGB video light

COLBOR W60R RGB video light, 60 W

A portable video light to consider if you want to adjust the setup for filming your drawings.

The product name specifies RGB, 60 W and a weight of 345 g.

Joybuy
Ulanzi VL81 rechargeable LED video light

Ulanzi VL81 rechargeable LED video light

An option to consider if you need to move your lighting regularly; make a test recording to assess coverage of your drawing area.

The product name describes a rechargeable LED video light.

Joybuy
Ulanzi VL49 RGB video light

Ulanzi VL49 RGB video light

A compact light to consider for additional lighting or a limited workspace; test whether it provides enough coverage for your paper.

The product name specifies a 2000 mAh battery and a dimmable light.

Joybuy
Ulanzi VL119 RGB light wand

Ulanzi VL119 RGB light wand, 10 W

A light wand to consider as an additional source in your filming setup; check the footage to see whether the drawing area is lit sufficiently.

The product name specifies RGB and 10 W.

Joybuy
Ulanzi LM001 portable mini fill light

Ulanzi LM001 portable mini fill light

A compact option to consider if you want to add some extra light; check that the mount suits your table or setup.

The product name specifies a magnetic LED light and a 500 mAh battery.

Joybuy

Frequently asked questions

How should I position the light if my hand casts a shadow on the drawing?

Position the light source at an angle beside the work area and make a test recording with your hand in different positions. A diffuser or suitable softbox can soften and spread the light. If you’re using glossy paper, also check for reflections from the camera angle.

Why does white paper still look yellow or blue when my light is adjustable?

Your new light and the existing artificial lighting may have different colour casts. Set your camera’s white balance to match the light falling on the paper, then check the result with a white surface in the frame.

How can I prevent horizontal bands in my footage?

First, test with the dimmer setting and camera settings you actually plan to use. For light associated with a 50Hz power supply, Sony lists 1/50 or 1/100 second as possible shutter speeds; the result depends on the camera and light source.

Which accessories should I check before choosing a light?

Check whether a stand, light modifier, adapter or battery is included with the specific version. A COB light with a Bowens mount and a light with a different accessory mount may need different fittings.

What product safety rules apply to an electric video light in the Netherlands?

According to the Netherlands Food and Consumer Product Safety Authority, electrical consumer products covered by the relevant European rules must carry the required CE marking. The applicable technical requirements depend, among other things, on the model and the voltage of the light and power supply; the CE mark alone does not prove that an individual item has been inspected.