Maker with limited table space
You film your hands and paper from above and want to keep the work surface clear. Measure the edge of the table and check that the clamp and lamp arm will fit there.
Start with this in mind: your work surface and hands should remain clearly visible in the frame. A desk clamp can save table space, while a panel on a separate stand takes up room, and a compact rechargeable light is easier to move. Then choose based on adjustable lighting, the power supply you need and whether the light will illuminate the whole collage area evenly.
You film your hands and paper from above and want to keep the work surface clear. Measure the edge of the table and check that the clamp and lamp arm will fit there.
You want pupils to be able to distinguish shades and details. Look for adjustable white light and the stated colour rendering, and make a test recording with your own camera and materials.
You record a whole lesson or regularly move your filming area. Compare the power options and check which mount and power accessories you’ll need.
Choose this when: you have a suitable table edge and want to keep the work surface clear. Elgato describes the Key Light Air MK.2 as a panel with a desk clamp.
Consider: check the shape of the edge and the clearance underneath the table; according to Elgato, maximum light output depends on the power supply.
Choose this when: you have a permanent filming area and can make room beside the table for a stand.
Consider: the Godox manual gives the panel dimensions as 360 × 240 × 27 mm and says NP-F970 batteries must be purchased separately for battery operation. Remember to allow for the stand and power supply.
Choose this when: you move your setup often or want a small light for fill lighting. SmallRig describes the RM120 3808 as having a built-in battery and diffuser.
Consider: the included cold-shoe mount is not necessarily a table mount; test whether one small panel will cover the collage area sufficiently.
| What to consider | What to look for | Which consumers |
|---|---|---|
| Mounting and space | Measure the table edge and the space beneath it; decide where the light, camera and your hands will go. | I want to keep the collage surface clear and avoid the light or stand appearing in shot. For consumers whose main concern is mounting and workspace, this is the top priority for around 31%. |
| Paper colours | Compare the specifications for the exact model and film a test piece using white paper and your own materials. | I want to show differences in paper and collage colours clearly, including with my camera and the room lighting. Around 25% of consumers prioritise recognisable paper colours. |
| Shadows and details | Check whether a diffuser is included and make a test recording while moving your hands. | I want to point out small components without my hands obscuring the details. Soft, even lighting is the top priority for around 25% of consumers. |
| Power and recording time | Check the power source and accessories required; compare the stated battery life at the specified light setting and watch your test video for light bands. | I want to record a lesson without having to move or recharge the light partway through. Around 19% of consumers put uninterrupted recording and power at the top of their list. |
A clamp may not fit on the edge of a table because of its shape or an obstruction underneath.
Measure the intended spot and check the clamp’s range and the fitting instructions for the model you choose.
Elgato states that the maximum light output of the Key Light Air MK.2 depends on the power supply used.
Check which power supply is included with the version you’re considering and whether it suits your filming setup.
Godox specifies NP-F970 batteries for the LEDP260C, which must be purchased separately. The cold-shoe mount on the SmallRig RM120 is not a freestanding table stand.
Check what’s in the box for each model, along with the batteries required and a suitable mount.
Specifications for the Ulanzi PL25 may vary between versions.
Compare the full model name and specifications of the version on offer before applying those details to your own setup.
The Key Light Air MK.2 is a desk-focused panel for setups where you need to keep the work surface clear.
The RM120 3808 is a compact battery-powered panel for a portable setup or fill lighting.
The LEDP260C is a larger panel for a permanent filming area where there’s room for a separate stand.
The PL25 illustrates what a small, portable panel light can offer.
This selection from Joybuy includes clamp lights and compact video lights for small or portable setups. Check that each product’s mount, lighting settings and power supply suit your table and overhead filming angle.
No image available
A clamp light could suit a small table where you want to attach the light to the edge.
According to the product description, the clamp fits surfaces up to 5 cm thick. The light has three lighting modes, is dimmable and features two independently adjustable lamp heads on a flexible neck.
No image available
The clamp and adjustable lamp head offer an option for positioning the light on the edge of a small table.
The product name specifies three light colours, five brightness settings, a 1000 mAh battery, USB-C charging and a 315° rotating clamp. The product description specifies CRI >90.
No image available
This compact light could suit a portable setup or work as extra lighting for close-up filming.
The product name specifies a 2000 mAh battery and an adjustable range of 2500–9500 K. The light is dimmable and has a magnet on the back. The product description recommends a standard 5 V adapter and warns against moisture and shining the light directly into your eyes.
No image available
The battery and 1/4-inch mount could suit a portable photo or video setup.
The product description specifies a 3300 mAh battery, CRI 95 and an adjustable colour temperature of 2500–9000 K. The stated runtime is up to 60 minutes at full brightness.
No image available
This bundle is designed to provide extra lighting in a setup with the DJI Osmo Pocket 3.
The product description specifies a built-in battery and magnetic mounting for the LM001. The included PK13 clamp is designed for the DJI Osmo Pocket 3.
No, not necessarily. Position the light outside the camera’s frame and test for distracting shadows while moving your hands. Diffusion can soften harsh shadow edges; a test recording will show whether the chosen position works for your work surface.
Measure the table edge at the intended position and check its shape, the clearance underneath and the cable route. Follow the clamp range and fitting instructions for the model you choose, as there’s no universal table thickness that suits every clamp.
First, test the camera and lighting settings in the filming setup you intend to use. Canon Europe explains that some LED light sources can cause banding when used with electronic readout; a stated CRI or battery life won’t rule this out.
According to ACM ConsuWijzer, the seller is responsible for the statutory guarantee. Depending on the circumstances, a faulty product must be repaired, replaced or refunded free of charge. Online purchases often also come with a 14-day cooling-off period after delivery, with some exceptions.
Electrical devices placed on the market must comply with the applicable European rules. Ondernemersplein also explains the EU declaration of conformity, which the manufacturer must draw up and sign. Check the documentation for the specific version before buying.