Who is this microphone guide for?

Solo intro presenter

You want to record short spoken intros straight to your computer and monitor the sound yourself, without a separate interface.

Recording in a challenging room

You can hear ventilation, computer noise or reflections in your recordings, and can position the microphone close to your mouth. You therefore want to focus on getting the room and microphone placement right.

Podcaster planning to expand

You may want to use an interface or extra microphones later, and are weighing today’s convenience against the equipment you might need in the future.

Which factors matter most when choosing?

USB

A good fit if: you want to record a solo intro straight to your computer without a separate interface; Elgato describes USB as a direct connection option.

Consider: using several microphones or expanding your signal chain later may call for a different setup.

USB and XLR

A good fit if: you want to record over USB now, but may use an interface later; according to the manufacturers, the Shure MV7+ and RØDE PodMic USB both have these connections.

Consider: the extra connection option is most useful if you plan to use that alternative setup in the future.

XLR

A good fit if: you already have a suitable interface or plan to add one; Elgato also recommends an interface and XLR cable for recording to a computer via XLR.

Consider: an XLR microphone doesn’t work as a USB microphone, so factor in the extra equipment you’ll need.

Start by choosing the setup that suits your recording space and preferred connection. Then compare it with the equipment you already have and the controls you’ll need while recording.

Factor What to look for Who should pay extra attention?
Recording directly Check your computer’s connection, the cable supplied and whether the microphone has a headphone output. I want to record my intro on my computer without a separate interface and listen while I speak. Around 29% of consumers rank simplicity for solo recording as their top reason for buying.
Room noise Make a test recording in your intended location and check your speaking direction, distance from the microphone and any distracting sounds. Shure emphasises that positioning the microphone close to the speaker can help reduce reflections in the recording. If ventilation, computer noise or reflections are audible in my intro, I want to find out first what a different microphone position can do. Around 23% of consumers put room noise first.
Equipment needed Check what’s included with the version you choose. To record on a computer via XLR, you’ll need a suitable interface and cable. I want to know which parts will complete my desk setup before I buy, rather than having to connect something else afterwards. Around 18% of consumers rank having a complete setup as their top reason for buying.
Room to expand later Check whether the full model has both USB and XLR; the RØDE PodMic is not the same model as the PodMic USB. I’m starting with a solo intro, but may want to use an interface or more microphone inputs later. Around 18% of consumers rank expandability as their top reason for buying.
Controls and vocal sound Listen to a test recording in your own space and check whether the gain, mute and headphone controls suit the way you work. If my room is suitable, I want to assess the vocal sound and controls while recording. Around 12% of consumers rank vocal detail and easy access to controls as their top reason for buying.

Which buying mistakes can you avoid?

  • Expecting a different microphone alone to fix the room

    Reflections and background noise can make their way into a recording, even in a room that seems quiet. Shure therefore recommends paying attention to the room and microphone placement.

    First, make a test recording where you plan to speak. If needed, adjust the microphone position or the room before giving claims about noise cancellation too much weight.

  • Confusing the RØDE PodMic with the PodMic USB

    According to RØDE, the PodMic USB has both USB and XLR; the separate PodMic has an XLR output.

    Check the full model name and the connections on the version you’re buying. Recording on a computer via XLR requires a suitable interface and XLR cable.

  • Comparing only the microphone, not the complete setup

    What’s included can vary between versions. For example, Sennheiser lists a table stand for the Profile USB and a boom arm for the Profile Streaming Set.

    Make a list of the parts you’ll need for your desk before buying. For XLR, check which interface and cable you’ll need, and whether your chosen set includes a stand or boom arm.

Which microphone brands are worth considering?

Shure

The MV7+ offers USB/XLR connectivity, while the MV7X is an XLR-only option.

  • Shure lists USB-C, XLR, headphone monitoring and digital features for the MV7+.
  • According to Shure, the MV7X has no USB or DSP features, so don’t assume it has the same features as the MV7+.

RØDE

The PodMic USB is designed for anyone who wants USB and XLR on one model; the PodMic has a separate XLR connection.

  • RØDE lists both connections and a headphone output for the PodMic USB.
  • According to RØDE, the PodMic has an XLR output only. You’ll need an interface to record on a computer using this connection.

Audio-Technica

The AT2040USB is a dynamic USB option for recording a solo intro.

  • Audio-Technica lists a hypercardioid pickup pattern, mute function and headphone output.
  • Manufacturer claims about rejecting background noise aren’t an independent comparison; assess the results in your own space.

Sennheiser

The Profile USB is a USB option with controls on the microphone.

  • Sennheiser lists a cardioid condenser capsule and gain, mix and volume controls.
  • The Profile USB with table stand and the Profile Streaming Set with boom arm have different contents, so check which version you’re buying.

Elgato

The Wave DX is a dynamic microphone for an XLR setup.

  • Elgato describes the Wave DX as an XLR microphone.
  • To record on a computer via XLR, you’ll also need a suitable interface and cable. Descriptions of sound quality or noise rejection are manufacturer claims.

Microphones and recording systems at Joybuy

The selection below includes USB desktop microphones and wireless microphone systems for spoken recordings. Check that each model’s connections are compatible with your computer and the setup you plan to use for your intro.

DJI Mic Mini 2S with 2 TX, 1 RX and Charging Case

DJI Mic Mini 2S (2 TX + 1 RX + Charging Case)

The two transmitters may suit spoken recordings with two people, such as an intro with several speakers.

The product description lists internal 32-bit float recording and computer compatibility.

Joybuy
Lark M2 wireless lavalier microphone system

Lark M2 Wireless Lavalier Microphone System

A wireless lavalier setup to consider if you want to record speech on the go; check that the connections are compatible with your recording device.

The product name lists 48 kHz/24-bit, a transmitter weight of 9 g and a stated range of 300 m.

Joybuy
USB condenser microphone with cardioid pickup pattern

USB condenser microphone with cardioid pickup pattern

For a fixed USB desk setup where you want to use headphones while recording.

The description lists a cardioid pickup pattern, mute button and headphone connection. Accessories listed include a scissor arm, shock mount, pop filter and USB cable.

Joybuy
DJI Mic 3 with 2 TX, 1 RX and Charging Case

DJI Mic 3 (2 TX + 1 RX + Charging Case)

The two transmitters may suit spoken recordings with several speakers.

The product description lists built-in microphones in the transmitters and computer compatibility; check that the receiver connection suits your setup.

Joybuy
Razer SEIRÉN V3 MINI Quartz USB microphone

Razer SEIRÉN V3 MINI Quartz

A compact USB microphone to consider for recording speech at a desk.

The product description lists a supercardioid pickup pattern and tap-to-mute controls.

Joybuy

Frequently asked questions about podcast microphones

How do I check my speaking distance if a dynamic microphone sounds quiet?

First, check the input level and make sure you’re speaking into the correct side of the microphone. For the PodMic USB, RØDE recommends a distance of around 5–10 cm; don’t assume the same distance will suit other models.

Can I connect an XLR microphone directly to my computer?

Not using the XLR output alone: you’ll need a suitable audio interface and XLR cable for this recording setup, as Elgato explains. A model that also has USB can be connected directly to a compatible device via USB.

What if the microphone I bought online doesn’t work properly?

For a consumer purchase in the Netherlands, the product must conform to the contract, and the seller is your point of contact for a solution. According to the Dutch government, there is no fixed statutory two-year guarantee period. The cooling-off period for online purchases from a business is separate from faults: according to ACM ConsuWijzer, it usually lasts 14 days from delivery, with some exceptions.

Can I use someone else’s music in my published podcast intro?

You can’t make copyright-protected music available to the public without the necessary permission, according to the Dutch government. BumaStemra explains that podcast licences can vary depending on how you publish, and that other rights holders may also be involved. So check the rights for the music and how you plan to publish your podcast.

What should I consider if someone else’s recognisable voice is featured in my intro?

Before publishing it publicly, consider the legal basis for processing personal data and agree the terms with the speaker. The Dutch Data Protection Authority says that consent is needed in most cases to publish another person’s personal data, but also identifies other legal bases and specific exceptions. The right assessment depends on the circumstances of the recording.