Who is this relevant to?

Archive manager

You want your projects to remain complete and readable after the move. Keeping a separate copy and checking the files afterwards are more important than simply choosing a fast stick. The Library of Congress recommends keeping at least two copies of personal digital files.

Editor working with large projects

You’re moving a lot of source material, so you need to match the capacity, file system and write speed to the files you’re actually taking with you. Adobe explains how to collect project files in Premiere and copy them to a new location.

Working between two locations

You’re moving material between computers that may have different USB ports. If the files contain personal data, you’ll also need to consider suitable security while transporting them; the Dutch Data Protection Authority links security measures to processing and privacy risks.

What should you look for?

First, make a list of everything in the project folder, including the largest files. Then check the ports, file system and write specifications of the stick. Plan for a separate copy too, and check that the files can be read.

What to consider What should you check? Who is this important for?
Recovery and a complete copy Keep a separate copy, then open the project and the media it uses after copying to check them. I don’t want to rely on a single stick during the move. Around 31% of consumers prioritise recoverability and a complete project copy.
Capacity and large files Check the total project size and the largest file. Also check the file system and usable capacity. If I want to take all the files used in the project, the largest individual file must fit too. Around 25% of consumers prioritise capacity and room for large files.
Write time Compare the stated write speed and check that the computer’s port and any hub can support it. For a large one-off transfer, I want to know whether the stick can write data quickly enough. Around 19% of consumers put copying time first.
Connection to both computers Check that the stick works with the USB ports at both workspaces. If you’re using an adapter or hub, check its supported transfer speed too. If the old and new computers have different ports, I want to transfer material without connection problems. Around 13% of consumers give compatibility the highest priority.
Personal data protection Decide whether you’re taking personal data with you and what security, access controls and key management are needed. When I transport personal data, I want to limit unauthorised access and match security measures to the risks. Around 12% of consumers prioritise privacy protection.

Common pitfalls

  • Relying on the stick you’re transporting as your only archive copy

    If the stick is lost or becomes unreadable, you’ll have no backup for the project files unless you’ve kept a separate copy.

    Before travelling, keep at least one separate copy and check that the files are readable when you arrive.

    Keeping an independent copy requires extra storage space and time to check the files.

  • Choosing capacity without checking the project files and file system

    An editing project may refer to source footage, audio and other media used in the project. FAT32 also limits individual files to 4 GiB, as documented by Microsoft.

    Check the project’s dependencies, its total size and the largest file. Then make sure the file system and both computers are suitable.

    If the files don’t fit, you may need to copy them again or use a different storage device.

  • Confusing read speed with the speed at which files are written

    A stated read speed doesn’t tell you how quickly you can put your archive on the stick. Samsung says that write speed for the BAR Plus 512GB is slower than its stated read speed; Kingston highlights the importance of a suitable host port for the DataTraveler Max.

    Compare the write specifications and check the port and any hub. Don’t treat stated maximum speeds as guaranteed copying speeds.

    If the speed isn’t right for your setup, the transfer could take longer than you allowed for when packing.

Brands to consider

Kingston

The DataTraveler Max and IronKey Locker+ 50 G2 are different ranges, designed for transfers and secure portable storage respectively.

  • Kingston specifies capacities of up to 1 TB and write speeds of up to 900 MB/s for the DataTraveler Max. Optimal performance depends on the host device and how you use it.
  • For the IronKey Locker+ 50 G2, Kingston specifies hardware encryption, a maximum capacity of 256 GB and write speeds of up to 115 MB/s. These specifications don’t apply to the DataTraveler Max.

SanDisk

The Extreme PRO Flash Drive with USB-C may suit you if a USB-C port and the available capacity work for both workspaces.

  • SanDisk lists capacities of up to 2 TB and write speeds of up to 900 MB/s for this product range.
  • These are manufacturer specifications, not transfer speeds measured during a move. Check the exact model and host port.

Transcend

According to Transcend, the JetFlash 930C has both a USB-A and a USB-C connector.

  • The datasheet lists models with capacities of up to 512 GB and maximum speeds of 420 MB/s read and 400 MB/s write.
  • You can’t use both connectors at the same time. Check that the capacity you choose is enough for your project files.

Lexar

The JumpDrive P30 is worth comparing if you need a model with a larger capacity.

  • Lexar lists a model with a capacity of up to 1 TB and read and write speeds of up to 450 MB/s.
  • These speeds are manufacturer specifications, not an independent measure of sustained write performance.

Samsung

The BAR Plus 512GB may be a good option if this capacity and a USB-A stick suit the available port and project size.

  • Samsung lists a maximum read speed of 400 MB/s for this model.
  • Samsung says that write speeds are slower. Don’t use the read speed to estimate how long it will take to copy a video archive.

USB sticks at Joybuy

These Joybuy products are USB sticks for taking video project files with you. Check that the capacity, connectors and stated write specifications of each model suit your move. Don’t rely on the stick you’re transporting as your only archive copy.

Kingston DataTraveler Exodia DTX 256 GB USB stick

Kingston DataTraveler Exodia DTX 256 GB

A USB stick for taking project files with you, if 256 GB is enough for the files you’ve inventoried.

The product name lists USB 3.2 Gen 1 and write speeds of up to 625 MB/s; this is not a measured transfer speed.

Keep a separate copy as well, and check that the files can be read.

Joybuy
Kingston DataTraveler Exodia 128 GB USB stick

Kingston DataTraveler Exodia 128 GB

A USB stick for project files, if the total size you’ve inventoried fits within the chosen 128 GB model.

The product name lists USB 3.2 Gen 1 and a Type-A connector. Check that it works with both computers.

Don’t use the stick as your only archive copy; keep a separate copy and check it too.

Joybuy
32 GB USB stick with stated compatibility with USB 3.0, USB-C, Lightning and Micro-USB

32 GB USB stick with multiple connectors

This model may suit you if 32 GB is enough for the files you want to take with you.

The product name lists compatibility with USB 3.0, USB-C, Lightning and Micro-USB. Check which connectors and any adapters are included with the model.

For an archive project, keep a separate copy of the files too.

Joybuy
SanDisk Ultra Flair 64 GB USB 3.0 USB stick

SanDisk Ultra Flair 64 GB

A 64 GB USB stick for project files that fit within the chosen capacity.

The product name lists USB 3.0. The stated speed of up to around 150 MB/s is for reading, not writing.

Plan for a separate copy and check that the files can be read after copying.

Joybuy
SanDisk Ultra Dual Drive Go 512 GB USB stick with USB-C and USB connector

SanDisk Ultra Dual Drive Go 512 GB

A 512 GB USB stick for taking project files between workspaces, if it works with the ports on both computers.

The product name lists USB 3.1 and USB-C; the product description also mentions a traditional USB connector. The stated speed is for reading.

Check the ports on both computers, and keep a separate copy of the project too.

Joybuy

Frequently asked questions

Should I copy only the editing project file?

No, check the media files used by the project too. Adobe describes an option in Premiere Project Manager to collect files and copy them to a new location; check which sequences and media you select. For other editing software, check which project dependencies you need to take with you.

Why won’t a large video file fit when there’s free space?

Check the file system: Microsoft lists a maximum file size of 4 GiB for FAT32. exFAT supports large files; before formatting, check that both computers can use it and back up any existing data first.

How should I look after the archive after I arrive?

Check that the copied files open, and keep copies on separate media and in separate locations. The Library of Congress also recommends checking periodically that files remain readable for personal digital archiving; this doesn’t guarantee that a storage device won’t fail.

What guarantee applies to consumer purchases in the Netherlands?

Alongside any manufacturer’s warranty, statutory consumer rights apply: if a product becomes faulty sooner than you could reasonably expect under normal use, the seller is responsible for providing an appropriate solution. ACM ConsuWijzer explains these consumer rights. This doesn’t guarantee recovery of lost project data; check the applicable terms for business purchases.

Does every stick containing video projects have to be encrypted under the GDPR?

No. The Dutch Data Protection Authority’s guidance doesn’t impose a general product requirement for this specific type of stick. Organisations that process personal data must choose appropriate security measures based on the processing and privacy risks. The regulator cites the loss of a stick containing unencrypted personal data as a possible data breach.