Who is this type of mixer for?

Percussion group mixing tracks afterwards

You want to record several microphones at once and adjust the instruments individually later. So count the usable microphone inputs, as well as the number of tracks the model can actually record. Zoom, Tascam and Allen & Heath describe different multitrack recording options.

Organiser recording without a laptop

You want to record the session directly onto a card at the community centre. Check whether each model saves separate tracks or just a stereo mix to SD. Manufacturers describe, for example, multitrack SD recording on Zoom and Tascam models, and stereo SD recording on Mackie models.

Session leader mixing as they record

You need to be able to control levels or monitor mixes while recording. Compare the controls and monitor outputs on the specific model with your venue’s setup. For example, Zoom lists separate monitor mixes for the LiveTrak L-12.

What should you look for in a USB recording mixer?

Multitrack recording via USB to a computer

Choose this if: you’ll have a computer available during the session and want to edit percussion parts individually afterwards.

Check: the number of suitable microphone inputs and USB recording channels on the exact model.

Separate tracks recorded to SD

Choose this if: you want to record without a computer and mix the instruments separately afterwards.

Check: how many tracks are available in the selected recording mode, and the model’s card requirements.

A stereo mix recorded to SD

Choose this if: you mainly want to keep a single recording of the full performance.

Check: instruments won’t be available as separate input tracks after recording. Mackie describes multitrack recording via USB and direct stereo recording to SD for the Onyx series.

What to consider What should you check? Which consumers is this important for?
Separate tracks and microphone inputs Count the microphones you’ll use at the same time and compare this with the suitable inputs and recordable tracks on the exact model. If I want to adjust percussion parts separately later, both the connections and recording channels need to be suitable. Around 36% of consumers rank separate post-production as their top priority.
Recording without a computer Check whether SD records in stereo or multitrack, and test the card beforehand according to the model’s instructions. If I want to record at the community centre without a laptop, I need to know whether a single stereo file is enough or whether I need separate tracks. Around 29% of consumers rank recording without a computer as their top priority.
Controls and monitoring Work out how many separate monitor mixes you need and whether the controls suit the person in charge. If I also need to manage the mix while the group is playing, practical controls and monitoring are important. Around 21% of consumers rank control during the session as their top priority.
A recording of the whole group Decide in advance whether a ready-to-play stereo mix is enough or whether you want to adjust the instruments later. If I only need a recording of the complete performance, editing each instrument separately doesn’t have to be a deciding factor. Around 14% of consumers rank a single final mix as their top priority.

Common buying mistakes

  • Assuming an SD slot guarantees separate tracks

    SD recording options vary by model. Mackie describes multitrack recording via USB and direct stereo recording to SD for the Onyx series.

    Check separately what your chosen model records via USB and directly to the card.

    If you need separate tracks but the model only records stereo to SD, you may still need a computer to record.

  • Assuming the number of tracks equals the number of microphone inputs

    A recorder with twelve tracks doesn’t automatically let you connect twelve separate microphones directly. Tascam describes the Model 12 as a mixer with ten inputs and a twelve-track recorder.

    Count the microphones you’ll use at the same time, then check the connections and recordable input tracks. Also check whether you need phantom power.

    If your planned microphones can’t be connected directly, you may need additional equipment.

  • Trying out recording settings for the first time during the performance

    The available recording channels can vary by mode. Allen & Heath lists fewer available SD channels at 96 kHz than at 48 kHz for the CQ-18T. Zoom also lists features that are unavailable in 96kHz mode on the LiveTrak L-12.

    Before the session, test your chosen recording mode, card and playback with the inputs you plan to use.

Brands to compare

Zoom

The LiveTrak L-12 combines mixing, a USB audio interface and standalone SD recording for multitrack recording on location.

  • Zoom lists eight mono inputs, five monitor mixes and a 14-in/4-out USB interface for the L-12.
  • Zoom says some features are unavailable in 96kHz mode. Check whether this limitation suits your recording plans.

Tascam

The Model 12 combines a mixer, USB interface and standalone multitrack recorder for sessions with or without a computer.

  • Tascam specifies ten mixer inputs, twelve SD recording tracks and a 12-in/10-out USB interface.
  • According to Tascam, the SD recorder is limited to 24-bit/48 kHz. Twelve tracks aren’t the same as twelve separate microphone inputs.

Allen & Heath

The CQ-18T offers physical microphone connections and digital routing for a more extensive percussion setup.

  • Allen & Heath’s technical sheet lists sixteen XLR-capable inputs, USB-B multichannel audio and SD multichannel recording.
  • Allen & Heath lists fewer available SD channels at 96 kHz than at 48 kHz. Check that the touchscreen controls suit the user.

Mackie

The Onyx12 is an analogue mixer with hands-on controls. Recording via a computer and recording directly to SD offer different options.

  • Mackie lists multitrack recording via USB and direct stereo recording to SD for the Onyx series.
  • If you want to save separate tracks without a laptop, don’t assume the Onyx12 supports this just because it has an SD slot.

Behringer

The FLOW 8 is a compact digital USB mixer with app control for a smaller setup.

  • Behringer describes eight inputs, app control and a USB audio interface.
  • The number of inputs doesn’t prove that you can connect every microphone in your percussion setup directly. Check the connections on this model.

Joybuy products

Related products coming soon.

Frequently asked questions

Can I record every percussion instrument separately with any USB mixer?

No. Don’t assume you can based on the word USB or the number of mixer channels. For the exact model, compare the number of usable microphone inputs with the number of separate channels recorded via your chosen USB or SD option.

What should I check before recording to SD?

Make a short test recording and check that you can play the files back. For SD multitrack recording in the CQ series, Allen & Heath specifies FAT-32 and lists a Class 10 U1 SDHC card. Don’t apply this model-specific instruction to other brands without checking.

Who can help if a mixer bought as a consumer in the Netherlands turns out to be faulty?

According to the Dutch government, the seller must provide a solution. There is no fixed statutory warranty period in the Netherlands. What you can reasonably expect from the product and the cause of the fault are both taken into account.

Can I record people at a community centre and share the recording?

If someone can be identified from an audio recording, the Dutch Data Protection Authority says it may count as personal data. Processing it requires a valid GDPR legal basis; consent is one possible basis. For online livestreams of music events, BumaStemra states that permission is required to use music. A mixer doesn’t grant these rights.