Who is this suitable for?

Duet players who want to edit each part separately

If you want to adjust the two microphones separately after recording, check how many recording channels the mixer actually sends to your software via USB. Specifications from Yamaha, Allen & Heath and Zoom show that the number of physical inputs does not, by itself, determine the number of separate recording tracks.

Duet players who want to keep a single mix

If you set the balance while playing and mainly want to record the combined result, a USB stereo mix may be enough. Yamaha specifies four mono microphone/line inputs and 2 IN / 2 OUT via USB for the MG10XU.

Duet players sharing a desk

If two players share the same workspace, it’s not just the microphone connections that matter. You’ll also need room for cables and a way for both of you to listen together. Allen & Heath, Zoom and Tascam models differ, among other things, in their dimensions and headphone options.

What should you look for when choosing?

When recording a violin duet at one desk, start by deciding what kind of recording you want: separate parts, a single combined mix or a standalone recording without a computer.

What to consider What should you check? Who is this important for?
Separate recording tracks Compare the number of microphone inputs with the number of separate USB channels or internal recording tracks. If I want to adjust the two violin parts separately afterwards, I’ll check the actual channel routing. Around 36% of consumers prioritise separate post-production.
Combined stereo mix Check which signal is recorded via USB and make a short test recording. If I can set the balance while playing and then keep a single duet mix, the USB output for the combined signal is crucial. Around 29% of consumers prioritise this kind of direct mix.
Space and listening together Measure the available space, including room for cables, and check the headphone connections. If we’re sharing a desk and want to listen together using wired headphones, I’ll consider both the footprint and the listening options. Around 21% of consumers choose mainly based on shared workspace and listening needs.
Microphone connections and power Check the connection type and whether your chosen microphones need phantom power. If I want to connect my existing microphones or add more later, I’ll check the inputs and power options on the exact model. Around 14% of consumers prioritise compatibility or room to expand.

Common pitfalls

  • Confusing the number of mixer channels with the number of USB recording tracks

    A mixer may have more physical inputs than separate USB recording channels. Yamaha specifies 2 IN / 2 OUT via USB for the MG10XU, while Allen & Heath specifies 4-in/4-out for the ZEDi-10. Check the full model name too: the ZED-10 and ZEDi-10 have different USB specifications.

    Before choosing a mixer for separate post-production, compare the USB specification and channel routing for the exact model.

  • Overlooking microphone placement

    When recording acoustic instruments, microphone placement and the sound of the room affect the recording.

    Start with a short test recording featuring both violins, then adjust the microphone placement before recording the full session.

  • Assuming one headphone output means two listening positions

    Yamaha specifies one headphone output for the MG10XU, and Zoom lists one for the LiveTrak L6. Tascam lists two headphone options for the Model 12.

    Decide in advance whether both players want to listen via wired headphones at the same time, and check the connections on the exact model.

Brands to consider

These brands offer different recording setups. The features listed apply to the specific models below and not necessarily to every product from each brand.

Yamaha

The MG10XU is an analogue USB mixer for a duet where a combined mix is all you need.

  • Yamaha specifies four mono microphone/line inputs, +48 V phantom power and 2 IN / 2 OUT via USB.
  • Four physical inputs don’t mean four separate USB recording tracks; this model has one headphone output.

Allen & Heath

The ZEDi-10 is a good fit for players who want to record microphones on separate USB channels.

  • The manufacturer specifies four microphone inputs, global 48 V phantom power and 4-in/4-out USB.
  • Check the channel routing in your recording software and make sure the dimensions of approximately 332,9 × 274,6 mm will fit on your desk.

Zoom

The LiveTrak L6 combines a USB interface with standalone multi-track recording to microSD.

  • Zoom specifies two XLR/TRS combo inputs and separate recording to microSD. Phantom power is available for the two XLR inputs.
  • Both microphone inputs are needed for two violin microphones, and the model has one headphone output.

Tascam

The Model 12 combines a mixer, USB interface and built-in recorder for a more extensive setup.

  • Tascam specifies a built-in 12-track recorder, a 12-in/10-out USB interface and two headphone options.
  • The extra recording and monitoring options may not be necessary if you’re only using two violin microphones; consider the controls and desk space required.

Soundcraft

The Notepad-8FX is a compact analogue mixer with a USB connection and built-in effects.

  • Soundcraft lists a built-in USB interface and a headphone volume control.
  • Before choosing this model for separate violin tracks, check which signals can be recorded separately via USB.

Related products on Joybuy

Related products coming soon.

Frequently asked questions

Are two microphone inputs enough to record the violins separately on a computer?

Not necessarily: check the number of separate USB channels too. Yamaha specifies four mono microphone/line inputs and 2 IN / 2 OUT via USB for the MG10XU; Allen & Heath specifies a 4-in/4-out interface for the ZEDi-10.

How should I get started with microphone placement?

Start with a short test recording and move the microphones until the balance between direct violin sound and room sound suits the space and performance. Shure recommends varying placement and isolation when unwanted background noise is an issue.

Do violin microphones always need 48 V phantom power?

No, it depends on the microphone. Shure lists phantom power for the SM137, SM81 and KSM137 models. Check the requirements of your exact microphones and the relevant inputs on the mixer.

What should I check before buying to make sure I have everything for the setup?

Check which microphones, cables, headphone options and recording media you already have so you know what else you need. For online consumer purchases in the Netherlands, ACM ConsuWijzer states that you generally have up to 14 days from delivery to change your mind, subject to legal exceptions.

What rules must an electronic mixer meet to be sold in the Dutch market?

Electrical and electronic equipment may be subject to harmonised EU product rules requiring CE marking. The European Union outlines the applicable rules by product category; a general rule does not confirm that a specific version meets all requirements.