Who are these mixers for?

Radio play group with three or four performers

Needs enough simultaneous microphone inputs and an individual headphone control for each performer. Tascam and Zoom list four microphone and headphone connections for the Mixcast 4 and PodTrak P4next respectively.

Radio play creator focused on editing

Wants to edit voices and other audio sources separately after recording, so checks how multitrack recording via USB or memory card works. Tascam, Zoom and RØDE describe features for recording separate tracks.

Two-person creator at a busy table

Wants to manage two voices and sound cues without setting up a larger four-person system in a shared workspace. RØDE, Mackie and Yamaha describe models with two microphone inputs.

What should you look for?

Four performers at once

Choose this option: if four performers need a wired microphone and their own headphones at the same time. Tascam and Zoom each list four microphone inputs and four headphone outputs for the Mixcast 4 and PodTrak P4next.

Trade-off: Tascam says the Mixcast 4 has sound pads, a touchscreen and a 14-in/2-out USB interface; Zoom says the P4next can be powered by two AA batteries or USB. These are different features, not evidence of a difference in sound quality.

A compact setup for two voices

Choose this option: if no more than two performers use a wired microphone and headphones at once. The RØDECaster Duo, Mackie DLZ Creator XS and Yamaha AG08 each list two microphone inputs.

Trade-off: the RØDECaster Duo offers sound pads and multitrack recording, while the Yamaha AG08 is designed for computer control and USB routing. Check the physical connections: extra audio channels or pads don’t automatically mean extra microphone inputs.

For every performer recording at the same time, count both a microphone input and a headphone output. The percentages below relate to the purchasing priorities listed; use them as a guide, not as a reason to skip checking a specific model’s connections.

Concern What should you check? Who does this matter to?
Enough simultaneous performer connections Count the wired microphones and headphone outputs needed at the same time; also check whether each headphone’s volume can be adjusted separately. If I’m recording with three or four performers at once, I want everyone to be able to plug in and monitor directly. Around 36% of consumers prioritise having enough performer connections.
Separate tracks for editing Check whether the USB or card recording option you want captures separate tracks, and make a test recording beforehand. I want to be able to adjust a voice after recording without changing the whole mix. Separate editing is a priority for around 29% of consumers.
Effects and controls during the performance Check whether you can assign your own sounds to the pads and adjust performer levels separately. If I want to trigger cues during the radio play, accessible controls and clear level settings matter to me. Around 21% of consumers put live effects and controls first.
Space on a shared table Measure the available space, including connected cables and microphone arms; also check the dimensions and power options for the version you’re considering. I want to leave enough room for the other people and things at the table. A clear, flexible setup is the main concern for around 14% of consumers.

Pitfalls to avoid

  • Counting channels as if they were performer connections

    A mixer may have more assignable audio channels than physical inputs. This means the number of wired performers who can connect directly at the same time may be lower than the channel count suggests.

    Count the physical microphone and headphone connections needed for each simultaneous performer, not just channels, faders or pads.

    If not all performers can connect directly, you may need extra equipment.

  • Assuming USB automatically records separate tracks

    On the RØDECaster Duo, multitrack recording needs to be set up; according to RØDE, multitrack recording to a computer works via USB1. Another connection or setting may therefore not produce the same recording.

    Check the multitrack settings and connection in the manual, and test the files before your radio play session.

    A recording without the tracks you need may take longer to edit or leave you with fewer options for correcting it.

  • Assuming built-in or uploaded sounds are free to publish

    The fact that a mixer can play a sound doesn’t, by itself, tell you anything about the rights to a protected work or an existing recording.

    Before publishing, note where effects and music clips come from and what uses are permitted.

    You may need rights or replacement material before publishing.

Brands to compare

These models offer different ways to connect performers and record. Compare the features of the specific version with your table setup; the brand names on this page don’t indicate availability.

Tascam

The Mixcast 4 is designed for a setup with up to four directly connected microphones and four headphones, with SD multitrack recording and a USB interface.

  • Tascam lists sound pads, a touchscreen and separate recording tracks.
  • Check that its more extensive controls will fit on your shared table; these features alone don’t demonstrate an independent quality advantage.

Zoom

According to Zoom, the PodTrak P4next combines four XLR inputs and four headphone outputs with microSD and USB recording.

  • Zoom lists separate headphone volume controls and power via AA batteries or USB.
  • Make sure you’re looking at the P4next, not the older PodTrak P4; claims about noise reduction and vocal sound are manufacturer claims.

RØDE

The RØDECaster Duo suits up to two wired microphones and two headphones, with sound pads and recording to a computer or storage device.

  • RØDE describes sound pads and multitrack recording.
  • To record multitrack to a computer, multitrack needs to be set up and USB1 is required, according to RØDE.

Mackie

The DLZ Creator XS is a compact option for two microphones and two headphones, with recording via USB or removable storage.

  • Mackie lists guided setup and automatic level adjustment.
  • The specification lists two microphone preamps, not four; automatic level adjustment doesn’t guarantee that every recording will sound good without being checked.

Yamaha

According to the European specification, the AG08 is designed for a computer-based setup, with two microphone inputs, two headphone outputs, sound pads and USB routing.

  • The specification lists six sound pads and extensive USB routing.
  • USB channels aren’t extra physical microphone inputs. According to Yamaha, the headphone and headset outputs on channel 1 can’t be used at the same time.

Joybuy products

Related products coming soon.

Frequently asked questions

Can I edit the voices separately later?

Yes, if the mixer and recording method you choose capture individual tracks. Tascam and Zoom list separate recording features; on the RØDECaster Duo, multitrack recording must be enabled, and recording to a computer requires USB1, according to RØDE. Make a test recording before your session.

What should I set up before the first recording?

Connect the intended microphone and headphones for each performer, set the levels and make a short test recording to check which tracks are saved. For the RØDECaster Duo, RØDE describes separate settings for multitrack recording to storage and via USB.

What about the warranty and cooling-off period for an online purchase in the Netherlands?

For a consumer purchase, the seller must help if the product is faulty; according to the Dutch government, the Netherlands doesn’t have a fixed statutory two-year warranty period. Online purchases generally come with a cooling-off period of up to 14 days after delivery, subject to legal exceptions, according to ACM ConsuWijzer. Check the seller and the terms of the specific offer.

Can I publish performers’ voices, music and effects in the radio play?

Consider publication rights separately from buying the mixer. For identifiable personal data, the Dutch Data Protection Authority describes the applicable GDPR legal bases; consent isn’t necessarily the only possible basis. Permission or an appropriate licence may be required for existing protected works and music recordings, subject to applicable exceptions. What’s needed depends on the people involved, the material and how you publish it.