Percussionist mixing separate tracks
You record several instruments or microphones at once and want to adjust their levels individually later. Tascam and Zoom describe models with separate recording channels.
For a straightforward stereo mix, a compact mixer may be all you need. If you want separate percussion tracks that you can edit later, choose a model with confirmed multichannel USB. And if you also want to record without a computer, look for a mixer with an SD recorder. Always check how many microphone inputs and separate recording tracks the exact model offers. Yamaha specifies four mono microphone inputs and 2-in/2-out USB for the MG10XU, while Tascam lists a 12-in/10-out USB interface and SD recording for the Model 12.
You record several instruments or microphones at once and want to adjust their levels individually later. Tascam and Zoom describe models with separate recording channels.
You want to connect a small microphone setup and are happy with a single pre-mixed recording. Yamaha specifies 2-in/2-out USB for the MG10XU.
You want to capture a rehearsal or session directly onto a memory card, then transfer the files to a computer later. The Tascam Model 12 and Zoom LiveTrak L-12 combine SD recording with a USB interface.
Suitable if: you use no more than four microphones and a stereo mix is enough. Yamaha gives the MG10XU as an example, with four mono microphone inputs.
Trade-off: the balance between instruments is largely fixed once you have recorded the stereo mix; the four inputs do not give you four separate USB tracks.
Suitable if: you want to process each percussion source separately later. Tascam specifies a 12-in/10-out USB interface for the Model 12, while Mackie describes the Onyx12 as a mixer for multitrack recording over USB.
Trade-off: as well as checking the USB routing, consider how many physical microphone inputs you need to use at once.
Suitable if: you also want to record without a computer. Tascam describes SD recording on the Model 12, while Zoom lists twelve separate SD tracks for the LiveTrak L-12.
Trade-off: you’ll need a suitable memory card, and you’ll have to transfer and manage your files. Zoom states that simultaneous recording in audio interface mode and to SD is limited to 48 kHz.
For consumers recording percussion at home, the choice mainly comes down to how you want to record and how many microphones you need to use at once.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Separate USB tracks | Check which physical channels are sent separately to your recording software over USB. | I want to be able to change the balance of individual percussion sources after recording; around 36% of consumers prioritise separate tracks for this reason. |
| Microphone inputs | Count the microphone and line sources you need to use at once, and check that the exact model has the right connections. | When I use several microphones at once, I want to be able to connect them all; around 29% of consumers prioritise having enough simultaneous microphone inputs. |
| Stereo recording | Check that the USB recording captures the stereo mix you want and that there are enough microphone inputs. | If a single pre-mixed recording is enough, I don’t need to edit separate tracks afterwards; around 21% of consumers mainly choose this straightforward stereo setup. |
| Recording without a computer | Check the SD recording mode, the number of separate tracks and the available monitor outputs. | I want to record a session directly onto a memory card and transfer it later; around 14% of consumers prefer to record without a computer. |
A mixer may have several physical channels but offer a different USB recording configuration. Yamaha specifies four mono microphone inputs and 2-in/2-out USB for the MG10XU.
Decide in advance whether you want to keep a stereo mix or separate microphone signals, then check the USB specifications for the exact model.
An SD slot alone doesn’t tell you which recording modes are available or how many separate tracks you can record.
If computer-free multitrack recording is important to you, check the SD track capacity and recording mode for the exact model.
Zoom states that the LiveTrak L-12 is limited to 48 kHz when audio interface mode and SD recording are used simultaneously.
Check the combination of recording format, USB, SD and monitoring that you actually plan to use.
The MG10XU is a compact option if stereo-focused USB recording is all you need.
The Model 12 combines a mixer, a multichannel USB interface and a built-in SD recorder.
The Onyx12 is an analogue USB mixer for anyone looking for hands-on mixer controls and multitrack recording via a computer.
The LiveTrak L-12 combines separate SD recording with a USB interface and several monitor mixes.
The CQ-12T is a compact digital mixer with multichannel USB and SD recording.
No. Check the physical microphone inputs and USB recording channels separately. Yamaha specifies four mono microphone inputs and 2-in/2-out USB for the MG10XU; Tascam specifies a 12-in/10-out USB interface for the Model 12.
Start by positioning the microphones, then listen to a short test recording before capturing a full session. Yamaha describes drum overheads as a use for stereo microphone setups and discusses phase-coherent positioning.
Check which memory cards your chosen model supports, and plan how you’ll transfer and store your recordings. Tascam describes SD recording and transferring WAV files; Allen & Heath recommends a Class 10 U1 SDHC card for the CQ series.
Business.gov.nl explains that businesses selling or trading electrical or electronic equipment in the Netherlands must ensure it meets the applicable European requirements; the manufacturer must affix the CE marking. Ask the seller whether the model on offer is intended for the Dutch market.