Who is this advice for?

Percussionist dealing with room noise

You’re recording acoustic percussion, but background noise and the sound of the room are also being picked up. Start by adjusting the microphone position and listening to what’s actually being recorded; changing the mixer won’t replace this step. Shure explains how the distance from the sound source affects the balance between the instrument, reverberation and background noise.

Percussionist who wants separate tracks

You’re using several microphones and want to balance the instruments individually afterwards. So don’t just look at the number of mixer channels; check the USB routing for the specific model too. Allen & Heath describes a setting on the ZEDi-10FX that sends four mono inputs separately to your computer.

Home recorder who wants to record independently

You want to use headphones and may also want to record without a computer. Compare the actual SD recording features and check which functions remain available in your chosen recording mode, as Zoom notes for the LiveTrak L-8.

What should guide your choice?

USB stereo mix

Suitable if: you balance the microphones on the mixer in advance and don’t need separate tracks. Yamaha specifies four mono mic/line inputs and USB audio with 2 inputs and 2 outputs for the MG10XU.

Bear in mind: four physical inputs aren’t the same as four independent USB recording tracks; it’s less flexible to adjust the combined balance afterwards.

Separate USB inputs

Suitable if: you want to edit your microphones individually afterwards. Allen & Heath specifies four mic/line inputs and a 4-in/4-out USB interface for the ZEDi-10FX. The M1–M2–M3–M4 setting sends the four mono inputs separately.

Bear in mind: the selected USB routing mode determines which signals your computer receives. Separate tracks won’t remove room noise that the microphones have already picked up.

SD card recording

Suitable if: you want to record without a computer, or standalone recording alongside USB is important to you. Zoom says the LiveTrak L-8 can record separate tracks to an SD card.

Bear in mind: in 96 kHz mode, the LiveTrak L-8 doesn’t support features including EQ, effects, overdubbing and use as an audio interface.

If you’re looking to record percussion in a noisy flat with a USB mixer, your choice mainly comes down to room noise, separate tracks, suitable inputs and how you want to monitor or record.

Concern What to check Who this matters to
Reducing room noise Make a test recording with different microphone positions and listen to the balance between the percussion and background noise. If I’m recording in a noisy room, I first want to hear how much background noise the microphone picks up. Around 36% of consumers would consider reducing room and background noise their main concern.
Separate tracks Check the number of USB recording inputs and which routing mode sends the microphones through separately; Allen & Heath describes the M1–M2–M3–M4 mode for the ZEDi-10FX. If I want to balance microphones separately later, I look for independent tracks rather than just the number of mixer channels. Around 29% of consumers would prioritise post-production of separate percussion tracks.
Suitable inputs Count the microphones you’ll use at the same time and check the model’s available mic/line inputs and phantom power requirements. If I’m connecting several percussion sources at once, the inputs need to suit my microphones. Around 21% of consumers would consider connecting multiple microphones at once their main buying concern.
Monitoring and recording without a computer Check the headphone output, what is saved to the SD card and which features are available in your preferred recording mode. If I want to listen while recording or work without a computer, I look at monitoring and standalone recording features. Around 14% of consumers would prioritise this way of recording.

Common buying mistakes

  • Assuming four mixer inputs mean four USB tracks

    The Yamaha MG10XU has four mono mic/line inputs, but Yamaha specifies USB audio with 2 inputs and 2 outputs. So the number of physical inputs doesn’t tell you how many separate signals your computer receives.

    Before buying, check both the number of USB inputs and the signal routing on the exact model.

  • Expecting a mixer to make the room quieter

    A microphone also picks up sound from its surroundings. And using headphones won’t stop acoustic percussion from being heard by your neighbours.

    Make test recordings with different microphone positions and listen to the result. The Government of the Netherlands recommends trying to agree on a solution together first if you’re having problems with noisy neighbours.

  • Assuming every SD recorder saves separate tracks

    PreSonus describes the StudioLive AR8c’s SD recorder as recording the stereo mix, while Zoom says the LiveTrak L-8 records separate tracks to SD.

    Check separately what your chosen model records via USB and saves to an SD card.

Brands and models to consider

Yamaha

The MG10XU is an option if you want four mono mic/line inputs and a combined USB recording is all you need.

  • Yamaha specifies four mono mic/line inputs, a headphone output and +48 V.
  • The specified USB audio is 2-in/2-out, so the four physical inputs aren’t four separate USB recording tracks.

Allen & Heath

The ZEDi-10FX suits a setup where you want up to four mono microphones as separate computer inputs.

  • Allen & Heath specifies four mic/line inputs and 4-in/4-out USB.
  • To get four separate mono inputs, you need to select the appropriate routing mode; other modes send different sources through.

Zoom

The LiveTrak L-8 is an option if separate SD tracks and recording alongside or without a computer are important to you.

  • Zoom lists six microphone preamps, separate SD tracks and four headphone outputs.
  • In 96 kHz mode, features including EQ, effects, overdubbing and use as an audio interface aren’t available.

Tascam

The Model 12 offers a more comprehensive setup, combining a mixer, standalone multitrack recorder and multichannel USB interface.

  • Tascam specifies a 12-track SD recorder and a 12-in/10-out USB interface.
  • Tascam Europe lists the Model 12 under discontinued products on its European downloads page. This alone doesn’t tell you whether it’s currently available in the Netherlands.

PreSonus

The StudioLive AR8c is worth considering if you want to combine separate computer recording with standalone stereo recording.

  • PreSonus specifies four microphone inputs and an 8x4 USB interface.
  • According to PreSonus, the SD recorder saves the main mix in stereo, so don’t expect separate microphone tracks on the SD card.

Joybuy products

Related products coming soon.

Frequently asked questions

Will buying a better USB mixer get rid of background noise?

No. A mixer can’t stop a microphone from picking up sound from the room. Try different microphone positions and listen to see whether the balance between the percussion and background noise changes. Placing the microphone very close can also affect the sound of the instrument.

How can I record several percussion microphones separately on my computer?

First count the microphone inputs you need, then check which inputs are sent separately to your recording software via USB. On the ZEDi-10FX, the M1–M2–M3–M4 setting sends the four mono inputs through separately. Yamaha specifies 2-in/2-out USB for the MG10XU, despite its four mono microphone inputs.

Can I record without my computer switched on?

That depends on the model and its recording features. Zoom says the LiveTrak L-8 can record separate tracks to an SD card, while the SD recorder on the PreSonus StudioLive AR8c is designed for the stereo mix. For the L-8, also check which features are available in your chosen recording mode.

Who should I contact if my mixer is faulty?

If your product is faulty, contact the seller. The Government of the Netherlands says there is no fixed statutory guarantee period for all products in the Netherlands; what you can expect from a product depends, among other things, on the product itself and the information provided at the time of purchase. Any manufacturer’s guarantee is in addition to this.