Which type is right for you?

Band planning to mix later

Are you recording several acoustic sources at once and want to adjust the vocals or instruments separately afterwards? Compare the number of usable microphone inputs with the number of tracks that can be recorded separately. Zoom and Tascam describe models with separate recording and USB routing.

Recording without a laptop

Would you like to record directly in the rehearsal room and transfer the files later? Check whether your chosen model can record separate tracks to SD, rather than just a stereo file. Zoom and Tascam describe models with SD recording.

Making a quick demo

Do you mainly need a group recording you can listen to straight away, and can you use a computer? A USB route focused on stereo may suit you if you can get the balance right while recording. Yamaha and Mackie describe these recording options for specific models.

What should you look for when choosing?

Stereo mix over USB

Choose this if: you want to capture one combined mix during rehearsal and don't need to edit the vocals or instruments separately afterwards. Yamaha specifies a 2-in/2-out USB interface for the MG10XU; Mackie's Standard mode records the main mix on the ProFX10v3+.

Bear in mind: a stereo mix won't let you adjust an individual source later in the same way as a recording with separate tracks.

Separate tracks over USB

Choose this if: you want to mix vocals and acoustic instruments separately after the session, and you use a computer and suitable recording software. Tascam describes a 12-in/10-out USB interface for the Model 12; Zoom lists a 12-in/4-out interface for the LiveTrak L-8.

Bear in mind: USB channels don't automatically correspond to physical microphone inputs. Check the connections and routing for each source you want to record.

Standalone recording to SD

Choose this if: you'd rather record during rehearsal without a laptop, but want to edit the sources separately later. Zoom and Tascam describe SD multitrack recording; Allen & Heath describes this capability for the CQ-12T.

Bear in mind: the model, storage medium and recording settings determine how you capture the tracks. For the CQ-12T, SD and USB-B are the stated multichannel options; USB-A is intended for stereo recording.

What to consider What to look for Relevant consumers
Mixing sources separately later Compare the number of separately recordable tracks with your microphone and instrument setup; check which USB channels are sent to the computer. If I want to adjust vocals and instruments separately later, I focus on having individual source tracks. Around 36% of consumers prioritise this.
Recording without a laptop Check whether SD recording supports multitrack and which storage medium the model uses. When a laptop is impractical during rehearsal, I want to record directly and transfer the files later. Around 29% of consumers prioritise recording without a laptop.
Making a quick group demo Count the microphones you want to connect at once and check whether the USB mode captures the full mix. If I mainly need a group demo I can listen to straight away, I can set the balance while recording. Around 21% of consumers prioritise a stereo demo.
Letting several musicians listen in Count the listening positions and check how many headphone outputs and monitoring options are available. When several musicians want to listen in at once, I want to know which monitoring connections are available. Around 14% of consumers prioritise personal monitoring.

Common buying mistakes

  • Confusing the total number of channels with microphone inputs or recording tracks

    The number of mixer channels alone doesn't tell you how many microphones you can connect at once or how many sources will be recorded separately. For example, Yamaha specifies four MIC/LINE inputs and 2-in/2-out USB for the MG10XU, while Tascam describes a different input and recorder configuration for the Model 12.

    First, make a note of the sources you need to record at the same time. Then compare the physical inputs, microphone preamps and separately recordable tracks individually.

    If the mixer you choose can't capture the sources you need separately, you may need additional recording equipment.

  • Assuming USB-A, USB-B and SD are interchangeable recording options

    On the Allen & Heath CQ-12T, USB-A is intended for stereo recording; SD and USB-B support the specified multichannel options.

    For the exact model, check which port is used for your preferred recording mode and which storage medium you need.

  • Mistaking a stereo mode for separate source tracks

    Mackie describes a Standard mode for the ProFX10v3+ that records the main mix with EQ and effects, and an Interface mode that sends untreated channels 1 and 2. These options don't provide separate recording tracks for every mixer channel.

    Decide in advance whether you need a combined mix or sources you can edit separately, then check which recording mode is right for you.

Brands to compare

Zoom

Zoom describes the LiveTrak L-8 as combining a mixer, SD recorder and USB audio interface, for anyone comparing different recording options.

  • Zoom lists separate SD tracks, six preamps with phantom power and four headphone outputs.
  • Count the microphones you need separately: the number of mixer channels isn't the same as the number of microphone preamps.

Tascam

Tascam describes the Model 12 as a mixer, SD multitrack recorder and USB interface, for anyone who wants to work on location and with a DAW.

  • Tascam specifies a 12-in/10-out USB interface and SD recording up to 24-bit/48 kHz; the USB interface and internal recorder can be used at the same time.
  • A specification such as 12 tracks doesn't mean the device has twelve physical microphone inputs; check the input configuration.

Allen & Heath

According to the manufacturer, the digital CQ-12T from Allen & Heath offers multichannel recording via SD or USB-B, for anyone who wants to set up source tracks and monitoring.

  • The technical data sheet lists ten XLR microphone/line inputs, five of which are combo sockets, and six aux outputs.
  • USB-A is for stereo recording; SD and USB-B provide the stated multichannel options. Check the source routing and recording settings.

Yamaha

According to Yamaha, the MG10XU is an analogue mixer with a USB interface, for anyone who wants to record a group demo using a computer.

  • Yamaha specifies four MIC/LINE inputs, +48 V and 2-in/2-out USB.
  • Don't assume all connected sources will be available as separate tracks over USB.

Mackie

According to the manufacturer, Mackie's ProFX10v3+ offers USB-C recording modes for either a full mix or channels 1 and 2.

  • Standard mode records the main mix, including EQ and effects; Interface mode sends untreated channels 1 and 2.
  • Interface mode doesn't record every mixer channel separately.

Joybuy products

Related products coming soon.

Frequently asked questions

Does a USB mixer record every microphone on a separate track?

No, it depends on the model and recording mode. Yamaha specifies 2-in/2-out USB for the MG10XU; Tascam lists a 12-in/10-out interface for the Model 12. Also check how the physical inputs are routed to the recording tracks.

How do I prepare to record without a laptop?

Check the compatible storage medium and recording settings for your chosen model in advance. For the CQ-12T, Allen & Heath describes, among other things, selecting the source and sample rate and arming the required tracks. Stop recording according to the model's instructions so that the files are finalised.

What cancellation period and guarantee apply to an online purchase by a consumer in the Netherlands?

According to ACM ConsuWijzer, online consumer purchases generally come with a statutory cooling-off period of up to 14 days after delivery, subject to applicable exceptions. There is no fixed two-year term for the Dutch statutory guarantee: what you can reasonably expect from the product is what matters. Consumer cooling-off rights do not automatically apply to business purchases.

Can I release a recorded cover demo without checking the rights first?

Not necessarily. BumaStemra explains that you may need a licence to record or perform a cover if the creators of the original work are affiliated with BumaStemra or a sister organisation. The permissions required may differ for other rights holders or an adaptation; this is a question about use and publication, not a requirement for the mixer.

Does a CE logo prove that a mixer offers high recording quality?

No. Business.gov.nl explains that CE marking is not a quality mark. The EU product rules that apply depend on the device. For a specific product and its power supply, check the relevant conformity information, and don't infer audio performance from the CE logo.