Singer who wants to edit one vocal track
Wants to edit the vocal microphone recording as a separate track later, so focuses on USB routing rather than just the number of mixer channels.
Choose a USB mixer for solo vocals based on the signals your computer records separately and the mix you want to hear while singing. The number of physical inputs doesn’t tell you how many separate tracks you can record. If you want to edit your vocals separately later, check the USB routing. If you sing along to a backing track or may want to record more sources in future, also look at the monitoring and loopback settings, and the number of simultaneous USB channels.
Wants to edit the vocal microphone recording as a separate track later, so focuses on USB routing rather than just the number of mixer channels.
Wants to hear both vocals and backing while recording, and decide in advance whether the backing track should also be included in the recording.
Starts with solo vocals but may want to send instruments or other sources to the computer simultaneously and as separate tracks later on.
First, decide which file you want to edit later and which sources you want to hear while singing. For solo vocals in a rehearsal room, USB routing, monitoring, room noise and future expansion can all influence your choice.
| What to consider | What to look for when buying | Who is this important for? |
|---|---|---|
| Editable vocal track | Check which source each USB recording channel receives. Yamaha specifies 2-in/2-out USB for the MG10XU; Allen & Heath specifies 4-in/4-out USB for the ZEDi-10FX. | If I want to edit my vocals separately from other signals later, the microphone needs to be recorded as a separate track in my DAW. Around 38% of consumers prioritise having a vocal track they can edit separately. |
| Monitoring with backing | Check the headphone routing and recording mode. Mackie explains that Loopback mode adds computer audio to the recording. | If I sing along to a backing track, I want to hear myself and the backing without accidentally recording it in my vocal file. Around 31% of consumers prioritise clear monitoring with backing. |
| Room noise and recording level | Try a quiet spot and set the gain for a loud vocal passage without clipping. Focusrite highlights background noise and clipping as things to watch out for when recording vocals. | If the rehearsal room is noisy, I want to get a usable recording of the vocal source first, before choosing extra features. Around 23% of consumers prioritise a good source recording. |
| Expansion or recording without a computer | Make a note of which sources you want to record separately at the same time, and check the number of USB channels. Zoom describes the LiveTrak L-8 as offering separate SD card tracks and a 12-in/4-out USB interface. | If I want to record more sources later or work without a computer, I want to factor those options into my choice from the outset. Around 8% of consumers prioritise expansion or standalone recording. |
The number of physical inputs isn’t the same as the number of signals recorded separately over USB. Yamaha specifies 2-in/2-out USB for the MG10XU; Allen & Heath describes the ZEDi-10FX as having four simultaneous DAW recording channels.
First, count how many sources you want to record separately at the same time, then compare the USB routing on the exact model.
If you later find you need separate tracks, you may need an additional interface or recorder.
Mackie says Loopback mode adds computer audio to the recording. This may not be what you want if you’re trying to keep a separate vocal track.
Make a short test recording using your chosen mode and backing track, then listen to the saved file before recording your session.
Changing the USB routing won’t automatically remove distracting noise from the rehearsal room or prevent clipping. Focusrite highlights background noise and clipping as issues to address at the vocal source.
Test the room and set the gain during a loud vocal passage before making extra effects or a higher recording resolution your deciding factor.
The MG10XU is worth considering if you want to mix several inputs and a two-channel USB route suits your recording needs.
The ProFX6v3+ is worth considering if you want to choose between direct channel recording, the main mix and loopback.
The ZEDi-10FX is worth considering if you want to send other sources to the computer at the same time as vocals, as separate tracks.
The LiveTrak L-8 is worth considering if you want to record rehearsals as separate SD card tracks without a computer.
No. Having USB or a certain number of physical mixer channels doesn’t guarantee this. Check which signals the USB channels record in the selected mode. According to Mackie, the ProFX6v3+ records channels 1 and 2 directly in one mode, while another records the complete mix.
If you’re monitoring the input directly through the mixer, check whether software monitoring is also enabled in your DAW. Focusrite warns that using direct and software monitoring at the same time can make you hear the same signal twice. Also check the monitoring route in your mixer’s manual.
Check that you have a suitable vocal microphone, microphone cable and headphones, and find out whether your microphone needs phantom power. Also test the room and recording level. A pop filter may be useful as part of your setup, depending on how you use it.
According to the Dutch government, you’re entitled to a product that meets the standards you can reasonably expect, and you should contact the seller if there’s a problem. The Netherlands doesn’t have a fixed legal guarantee period of two years for every product. What you can expect depends, among other things, on the product and the information provided.
Electrical and electronic equipment must comply with the relevant European product safety rules. According to Business.gov.nl, once the applicable technical and administrative requirements have been met, the manufacturer must affix the CE marking and draw up an EU declaration of conformity.