For solo vocals in a small booth, choose a USB mixer based mainly on what your computer records: a vocal signal you can edit separately, or a mix with effects and, potentially, computer audio. Then check that the headphone monitoring, microphone input and any phantom power suit your setup. A mixer won’t remove reflections from the room.
Who is this for?
Solo vocalist who edits their vocals later
They want their voice as a separate signal in their recording software, so they check the USB recording mode rather than just the number of mixer channels. Mackie describes an Interface mode for the ProFX6v3+ that sends channels 1 and 2 to the computer without effects; Allen & Heath describes USB source selection for the ZEDi-8.
Vocalist who wants a backing track in their headphones
They want to hear themselves and a backing track without accidentally including the backing track in the recording. Monitoring and loopback are separate options; Mackie describes a Loopback mode for the ProFX6v3+ that adds computer audio.
Creator with a cramped booth
They have little room for equipment and also need to consider reflections that the microphone might pick up. Shure notes that a microphone can’t improve the acoustic environment.
What should you look for when buying?
First decide which USB source you want to record and how you want to hear yourself and any backing track. Then check the microphone connection and power requirements, and make sure the mixer will fit in the space you have.
| What to consider |
What to look for when buying |
Who is this important for? |
| Vocals you can edit separately |
Check which input or mix is sent to the computer via USB, and which recording mode you need. |
If I want to edit my vocals separately afterwards, I need to know whether the software receives my voice as a separate signal. Around 36% of consumers prioritise an editable vocal track. |
| Headphone mix and backing track |
Check the headphone controls, how computer audio is routed, and whether loopback can be switched off. |
I want to hear myself and the backing track while singing, but choose what ends up in the recording. Around 29% of consumers prioritise the headphone mix. |
| Microphone connection and power |
Check the connection and power requirements of your microphone against the exact model; find out how +48 V is switched on. |
If I want to connect my current microphone, the input and any power supply need to be compatible. Around 21% of consumers start by checking compatibility. |
| Space and recorded room sound |
Measure the space available for the mixer and use a test recording to assess microphone placement and reflections. |
In a small booth, I want a practical setup and to find out how much room sound my microphone picks up. Around 14% of consumers prioritise booth space and the room sound in the recording. |
Common pitfalls
-
Confusing the number of mixer channels with the number of USB tracks
Having several analogue inputs doesn’t automatically mean the computer records each signal separately. The Allen & Heath ZEDi-8 has a 2-in/2-out USB interface; the selected USB source determines what the computer receives.
Compare the USB channels and source selection on the exact model, not just the number of analogue inputs.
-
Using loopback when you only want to record vocals
Mackie states that Loopback on the ProFXv3+ series adds computer audio to the recording. This could mean a backing track ends up in the same recording.
Start with a short test recording. For an unprocessed signal from channel 1 or 2, Mackie describes the Interface mode on the ProFX6v3+.
-
Expecting the mixer to fix reflections in the booth
A microphone can pick up both direct and reflected sound. Adding mixer effects won’t change the room’s acoustics.
Listen to a test recording and, if needed, adjust the microphone placement or the room before replacing your mixer for this reason. Shure explains this limitation of microphone placement.
Brands to compare
Yamaha
The AG03MK2 is designed for a compact setup centred around a single vocal microphone.
- Yamaha specifies +48 V on channel 1, a physical fader and two-track USB recording.
- The single microphone channel limits future expansion. Also consider whether loopback is right for what you want to record.
Mackie
The ProFX6v3+ is an option if you want to choose between a dry recording and a mix with effects or computer audio.
- Mackie describes three USB recording modes and two microphone preamps for the ProFX6v3+. Interface sends channels 1 and 2 to the computer without effects; Standard records the main mix with effects, while Loopback adds computer audio.
- These recording modes don’t automatically apply to the ProFX6v3 without the plus sign. The manufacturer’s sound-quality claims aren’t independent measurements.
Allen & Heath
The ZEDi-8 is designed for anyone who wants two inputs and a selectable USB recording source.
- Allen & Heath specifies two microphone/line inputs and a 2-in/2-out USB interface with a choice of USB recording source.
- A maximum of two USB channels can be recorded at once. The 48 V switch applies to both microphone inputs.
Soundcraft
The Notepad-5 is a small analogue USB mixer with a traditional channel layout.
- Soundcraft lists a built-in USB audio interface and a separate headphone volume control.
- Before buying, check that the USB recording route is suitable for editing dry vocals separately.
Behringer
The XENYX 802S is worth considering if you want to mix several analogue sources alongside a vocal microphone.
- Behringer lists a USB connection, microphone preamps with 48 V and headphone monitoring.
- If you want to edit your vocals separately later, check which mix or inputs the computer actually receives. The manufacturer’s sound-quality description isn’t an independent comparison.
Products at Joybuy
Related products will be available soon.
Frequently asked questions
Do I need 48 V phantom power for every vocal microphone?
No. Follow your microphone’s power requirements. Yamaha specifies +48 V on channel 1 of the AG03MK2; on the ZEDi-8, 48 V switches on for both microphone inputs at the same time.
Why is my backing track also in my vocal recording?
First, check the USB recording mode. Mackie states that Loopback on the ProFXv3+ series adds computer audio, while the Interface mode on the ProFX6v3+ sends the signals from channels 1 and 2 to the computer without effects.
How do I get started with recording and monitoring?
Connect your microphone and headphones, start with low levels and make a short test recording to check which source the recording software receives. Allen & Heath recommends turning the ZEDi-8 down to zero before connecting it; for use with Windows, the manufacturer describes a separate USB driver installation.
Will a different mixer fix the hollow sound in a small booth?
Not by itself. Shure explains that a microphone can pick up sound from the room, including reflections, and can’t improve the acoustic environment. So use a test recording to assess microphone placement and room sound too.