Who is a USB mixer for?

Solo vocalist who wants to edit vocal tracks

If you’re recording a single voice and want to edit it later, check whether the microphone input is sent separately to your recording software or whether your computer receives a complete mix. Mackie says the ProFX6v3+ has an Interface mode that sends channels 1 and 2 to the computer without effects.

Singer who wants to hear themselves and a backing track

If you sing along to a backing track, check both your headphone mix and the USB routing. Mackie says Loopback on the ProFXv3+ series adds computer audio to the recording, so check whether this mode is right for what you want to keep.

Creator planning to add more sources later

If you want to connect instruments or other sources after starting with solo vocals, check the number of physical inputs separately from the USB recording channels. Allen & Heath lists a 2-in/2-out USB interface for the ZEDi-8; Zoom says the LiveTrak L6 can record tracks individually to microSD.

What should you look for when choosing one?

Start by asking whether you want to edit your vocals separately later. Then consider your headphone mix and any plans to expand your setup.

What to consider What to look for Who it matters more to
Vocals you can edit separately Check which signals and effects are sent to the computer in each USB recording mode. If I want to edit my vocals separately afterwards, I need to know whether the microphone input is recorded on its own. Around 36% of consumers prioritise an editable vocal track.
Monitoring with a backing track Check the headphone signal path and whether USB return or Loopback adds computer audio to the recording. If I sing along to a backing track, I want to hear myself clearly without accidentally including the backing track in my vocal recording. Around 29% of consumers prioritise monitoring while singing.
Controls and effects Check that the fader or effects controls you want are available, and whether effects are recorded in the selected USB mode. If I want to adjust my listening mix while singing, direct control matters to me. Around 21% of consumers prioritise physical controls and effects.
Adding more sources Count the physical inputs, then check the number of USB inputs and outputs and whether separate recording is available. If I want to connect instruments or additional sources later, I need to know whether I can record them separately too. Around 14% of consumers prioritise future expansion.

Common buying mistakes

  • Assuming every mixer channel is recorded separately over USB

    The number of physical channels doesn’t tell you how many separate signals the computer receives. Allen & Heath lists a 2-in/2-out USB interface for the ZEDi-8.

    Check the USB specifications and signal routing for the exact model, not just the number of channels on the mixer.

  • Accidentally recording a backing track via Loopback

    Mackie says Loopback on the ProFX6v3+ adds computer audio to the recording. This may not be what you want if you only want to keep the vocals.

    Check the selected recording mode and listen back to a short test recording before doing a full take.

  • Confusing the manufacturer’s warranty with your statutory rights

    According to the Dutch Government, statutory guarantees are separate from any manufacturer’s or seller’s guarantee. If a product is faulty, the seller is your point of contact.

    Check what an optional paid warranty adds before choosing one.

Relevant brands

Yamaha

The AG03MK2 is a compact option for a single vocal microphone, with physical controls and USB audio.

  • Yamaha says microphone channel 1 has +48 V phantom power, and the model offers two-track USB recording and playback.
  • Check that the USB routing suits the tracks you want to edit in your recording software.

Mackie

The ProFX6v3+ is worth considering if you want to choose between different USB recording modes.

  • Mackie says Interface sends channels 1 and 2 to the computer without effects, while Standard records the mix with effects.
  • Loopback adds computer audio to the recording, so check which mode you’re using beforehand.

Soundcraft

The Notepad-5 is a compact analogue mixer with a built-in USB audio interface.

  • Soundcraft lists microphone connections and headphone controls.
  • Check the manual to see how the USB routing fits your vocal recording workflow.

Allen & Heath

The ZEDi-8 has connections for additional sources alongside a solo vocal microphone.

  • The manufacturer’s datasheet lists phantom power for XLR microphone inputs and a 24-bit/96 kHz 2-in/2-out USB interface.
  • Eight mixer channels don’t mean eight separate USB recording tracks.

Behringer

The XENYX 802S combines mono and stereo inputs with a USB streaming interface.

  • Behringer lists 48 V phantom power and headphone monitoring.
  • Before recording, check which signals are available separately over USB for your workflow.

Zoom

The LiveTrak L6 is a digital mixer and recorder for anyone who wants to save separate tracks as well as mix.

  • Zoom lists ten separate tracks plus a stereo mix on microSD, and use as a 12-in/4-out USB interface.
  • If you’re only recording a single voice, the extra tracks and features may be more than you need.

Products on Joybuy

Related products coming soon.

Frequently asked questions

How do I stop a backing track from ending up in my vocal recording?

Check the selected USB recording mode. Mackie says Loopback on the ProFXv3+ series includes computer audio, while Interface sends the signals from channels 1 and 2 to the computer without effects. This description applies to that series; check how other mixers work individually.

What should I check when connecting my microphone?

Check whether your microphone requires phantom power and which channel provides it. Then make a short test recording and listen to both the headphone mix and the recorded track. Yamaha lists +48 V on channel 1 of the AG03MK2.

Do I need an extra manufacturer’s warranty in the Netherlands?

An additional manufacturer’s warranty doesn’t replace your statutory rights. According to the Dutch Government, statutory guarantees are separate from any manufacturer’s or seller’s guarantee; if a product is faulty, the seller must provide a solution. The Netherlands has no fixed statutory guarantee period for this.

Can I return a mixer bought online?

For consumer purchases made through a webshop, you generally have a statutory cooling-off period of up to 14 days after delivery, according to ACM ConsuWijzer. There are exceptions, so check the terms that apply to your specific order.

Which product safety rules matter when buying in the Netherlands?

According to the Dutch Ondernemersplein, suppliers of electrical and electronic equipment must comply with the relevant European rules. For products that require CE marking, this includes an EU declaration of conformity. Check the relevant product information for the specific model; don’t assume it complies just because of the brand name.