Who is this guide for?

Solo singer in a reverberant hall

You want a clear vocal recording. So first assess the microphone position and the room’s reflections. Shure notes that a microphone cannot separate recorded reverb from the direct sound you want.

Singer using a backing track

You want to hear yourself and the backing track, but also decide whether the track is included in the recording. The recording mode and USB routing can make a difference.

Creator who wants to keep tracks separate

You want to edit vocals and possibly other sources separately later, or perhaps record without a computer. So check the recording options on the complete model.

What should you look for when choosing?

A mixed USB recording

A good fit if: you use one vocal microphone and want to record the mix as set up.

Trade-off: the number of physical inputs doesn’t tell you how many separate USB tracks you can record.

Direct USB channels

A good fit if: you want to send vocals directly to recording software and choose what happens to effects or computer audio.

Trade-off: check which channels the selected mode sends through. Recording two channels directly isn’t the same as recording every input separately.

More separate USB channels

A good fit if: you want to edit other connected sources separately from the vocals later.

Trade-off: check the channel routing on the exact model and make sure the number of USB channels suits your setup.

Standalone multitrack recording

A good fit if: you want to record several sources in the hall without using a computer.

Trade-off: check the storage, power and workflow you’ll need. For one simple vocal track, this recording option may offer more features than you need.

Make a short test recording in the intended location, then decide whether you need a mixed recording, separate tracks or standalone recording.

What to consider What to look for when buying Who is this important for?
Vocals and room sound Check the microphone input, gain control and headphone output. Make a test recording where you plan to sing. If I want clear vocals in a reverberant space, I first want to hear what the microphone picks up there. Around 33% of consumers say clear vocals despite room reflections are their top purchasing priority.
Separate vocal track Check which inputs are sent to the recording software as separate signals over USB. If I want to edit the vocals separately from other signals after the session, I check the routing on the complete model. Around 27% of consumers prioritise being able to edit vocals separately.
Backing track and monitoring Check headphone monitoring, USB return and the selected recording mode with a short test recording. If I want to hear myself and the backing track but choose exactly what gets recorded, I check whether the mode adds computer audio or leaves it out. Around 20% of consumers prioritise monitoring with a backing track.
Recording without a computer Check whether the exact model can record independently, and find out what storage and power it requires. If I want to record in the hall without a computer, I look for a mixer-recorder with a standalone recording option. Around 20% of consumers say standalone recording is their top priority.

Common buying mistakes

  • Assuming more inputs mean more USB recording tracks

    Physical inputs and separate USB channels aren’t the same thing. For example, Yamaha specifies four mono microphone/line inputs and USB 2-in/2-out for the MG10XU. Allen & Heath also distinguishes the ZEDi-10FX from the ZED-10FX by its different USB configuration.

    Check the USB specifications and channel routing for the full model name, not just the number of inputs.

  • Choosing a different mixer to fix room reverb

    Reflections picked up by the microphone are already part of the recorded signal. Shure explains that a microphone cannot effectively separate the direct sound from those reflections afterwards.

    First assess the microphone position and make a test recording in the room before comparing mixer features.

  • Using loopback without checking the recording

    On the Mackie ProFX10v3+, Loopback adds computer audio to the recording. This may not be what you want if you’re aiming for a separate vocal track without the backing track.

    Check the selected mode and listen back to a short test recording before recording the full vocal take.

Brands worth considering

Yamaha

The MG10XU is an analogue USB mixer for sending a set mix to a computer.

  • Yamaha specifies four mono microphone/line inputs, +48 V phantom power and USB 2-in/2-out for the MG10XU.
  • Four physical inputs don’t mean that four separate USB tracks are available.

Mackie

The ProFX10v3+ offers several USB recording modes, including a mix, loopback and direct recording of the first two channels.

  • Mackie says Standard records the mix, including effects; Interface sends channels 1 and 2 to the computer without effects.
  • Loopback adds computer audio, so check which mode suits the recording you want to keep.

Allen & Heath

The ZEDi-10FX is worth comparing if you want to record more separate USB channels.

  • Allen & Heath specifies four microphone/line inputs and a 4-in/4-out USB interface for the ZEDi-10FX.
  • Check the full model name: the manufacturer distinguishes the ZEDi-10FX from the ZED-10FX, which has a 2-in/2-out interface.

Zoom

The LiveTrak L-8 combines a USB interface with standalone recording to an SD card.

  • Zoom specifies separate recording to an SD card and a 12-in/4-out USB interface.
  • For one simple vocal recording, the standalone multitrack workflow may offer more than you need.

Behringer

The XENYX Q802USB is a compact analogue USB alternative worth comparing for microphone and line inputs.

  • Behringer lists two microphone inputs, USB audio and compression control on the mono channels.
  • Don’t assume the number of separate USB recording tracks from the number of inputs. Check the USB routing for the exact model.

Products on Joybuy

Related products coming soon.

Frequently asked questions

Can a USB mixer remove reverb from a community hall?

No. A mixer can’t remove reflections from vocals after the microphone has recorded them. First try different microphone positions in the hall and check the result with a test recording.

Do I always need phantom power for a condenser microphone?

Check the power requirements of your specific microphone and the mixer input you’re using. The Yamaha MG10XU and Allen & Heath ZEDi-10FX specify +48 V phantom power, but that doesn’t mean every microphone needs it.

How can I stop my backing track from being included in the vocal recording by mistake?

Check the USB routing with a short test recording. Mackie says Loopback on the ProFX10v3+ adds computer audio, while Interface sends the unprocessed signal from channels 1 and 2 to the computer.

What should I check before a recording session on location?

Check the connections, power and selected recording route with a test recording. If you choose standalone recording with the Zoom LiveTrak L-8, also check the SD storage you’ll need.

Can I publish a recording that includes someone else’s music?

Don’t assume you can publish a recording just because you made it yourself. The Dutch government says that, in principle, copyrighted music by others can only be used with the creator’s permission; a private copy for personal use cannot be distributed or made available to the public. If you record other identifiable people, privacy rules may also apply. Whether they apply to your session depends on the recording and how you use it.