Who is this for?

Singer dealing with audible background noise

You’re recording a single voice in a flat where traffic, housemates or other sounds may be picked up. Shure recommends placing the microphone close to the sound source, so don’t expect the mixer to quieten the room. RØDE notes that background noise can’t always be isolated completely.

Singer using a backing track

You want to hear yourself and the backing track, while also deciding whether the backing track is included in the recording. USB recording mode and your headphone mix are separate things; Yamaha and Mackie describe different signal routes for different models.

Creator looking to expand later

You’re starting with vocals, but may want to connect an instrument or a second source as well. Allen & Heath distinguishes between the physical inputs on the ZEDi-8 and the number of channels that can be recorded to a DAW at the same time.

What should you look for?

For solo singing in a noisy flat, your microphone setup has the biggest impact on how much room noise gets picked up. Choose the USB routing separately, based on what you want to record.

What to consider What to look for Who should prioritise this?
Audible room and background noise Listen to a test recording while singing and during pauses. Check that the microphone and gain settings work at a practical recording distance. If I want a usable vocal recording despite traffic or noise from housemates, I’ll first focus on microphone placement and the balance between my voice and the room. Around 36% of consumers make background noise their top priority.
The right vocal track over USB Check the manual to see which inputs the computer receives, and test a short recording before doing a full take. If I want to edit my vocals separately later, I need to know whether the computer receives a dry vocal track rather than just a mixed output. Around 29% of consumers put a separate track first.
Hearing vocals and backing track Check the headphone socket, level controls and whether computer audio is also included in the recording. If I want to sing along to a backing track without accidentally recording it, I’ll check both the headphone mix and the USB mode. Around 21% of consumers make control over singing along and recording their top priority.
Room for an extra source Count the physical inputs you need and compare this separately with the number of USB or DAW recording channels available simultaneously. If I want to connect an instrument or a second source later and may want to record it separately, I’ll check both figures for the exact model. Around 14% of consumers put expandability first.

Common buying mistakes

  • Mistaking a noise gate or mixer for soundproofing

    A noise gate can reduce sound below a set threshold during pauses, but background noise may still be audible while you’re singing. A mixer doesn’t remove ambient noise.

    Make a test recording at your normal singing volume. First, work on the balance between your voice and the room noise, for example by adjusting the microphone position.

  • Recording a backing track unintentionally

    In Loopback mode on the Mackie ProFX6v3+, computer audio is added to the recording; Interface mode records channels 1 and 2 without effects processing. The modes therefore capture different things.

    Check which USB recording mode you’ve selected and make a short test recording before doing a full take.

    If the backing track and vocals are recorded together, you’ll have less freedom to edit them separately afterwards.

  • Assuming physical inputs are the same as separate USB tracks

    The Allen & Heath ZEDi-8 has several physical inputs, but Allen & Heath specifies that two channels can be recorded to a DAW at the same time.

    For the exact model, compare the number of inputs with the number of USB recording channels available simultaneously.

    If you want to keep more sources as separate tracks, you may need different recording equipment.

Relevant brands to consider

Yamaha

The AG03MK2 is a compact option if you want to choose between dry input channels and a mixed USB output when recording with a single vocal microphone.

  • Yamaha describes the DRY CH1-2 (G) setting as routing the input channels directly over USB.
  • INPUT MIX sends the stereo mix over USB, so check which setting you’ve selected before recording. This alone says nothing about sound quality or reducing room noise.

Mackie

According to Mackie, the ProFX6v3+ offers different recording modes for a mix, computer audio via Loopback, or channels 1 and 2 without effects processing.

  • The different modes let you choose which signals are included in the recording.
  • Loopback includes computer audio; Standard includes effects and EQ. Choose the mode based on what you want to edit later. These features don’t prove that it performs better in a noisy room.

Allen & Heath

The ZEDi-8 may suit you if you want to connect other sources as well as solo vocals, with hands-on physical controls.

  • Allen & Heath specifies a USB audio interface with 2 inputs and 2 outputs, and two channels that can be recorded to a DAW at the same time.
  • The number of physical inputs isn’t the same as the number of separate USB recording tracks.

Soundcraft

The Notepad-5 is a compact analogue mixer with built-in USB audio for straightforward recording and mixing.

  • Soundcraft lists features including XLR connections, USB audio and a headphone level control.
  • Before buying, check how the exact model routes a separate dry vocal track to your computer.

Behringer

The XENYX 802S is an analogue USB mixer for anyone who wants to mix several sources using physical controls.

  • Behringer lists mono and stereo channels, headphone monitoring and 48V phantom power.
  • If you want to record vocals as a separate track, check the USB signal routing for the exact model.

Products on Joybuy

Related products coming soon.

Frequently asked questions

Can a USB mixer remove traffic noise or voices in the room from my vocal recording?

No, not as a general rule. Start by adjusting the microphone’s distance and direction, then listen to a test recording. A noise gate can reduce noise during pauses, but it won’t automatically remove background noise while you’re singing.

How do I connect a condenser microphone and headphones for my first recording?

Follow the manual for your exact mixer and check that the microphone is compatible with the input. For the AG03MK2, Yamaha instructs you to connect the condenser microphone first, then switch on +48V phantom power. Next, adjust the gain and channel level. Connect your headphones and start with the volume low.

Do eight mixer channels automatically mean eight separate recording channels?

No. Allen & Heath specifies that two channels on the ZEDi-8 can be recorded to a DAW at the same time. For any model, check both the number of physical inputs and the number of USB recording channels available simultaneously.

Can I sing loudly in my flat at any time?

Don’t assume that the same times apply to every flat. The Dutch Government says that nuisance caused to neighbours may be covered by local municipal by-laws in many municipalities. Check the rules in your municipality and any agreements that apply to your home.