Who is a USB mixer suitable for?

Solo performer

If you’re recording one voice on a computer, focus on the microphone connection and how you control the sound while recording. Yamaha specifies one microphone channel with +48 V and a physical fader for the AG03MK2.

Performer with guests

If you’re recording several voices and want to edit them separately later, check how many actual recording channels there are. Tascam specifies four microphone inputs and multitrack recording for the Mixcast 4; Zoom lists separate SD card tracks for the LiveTrak L-8.

Creator with live backing audio

If you’re mixing music, effects or computer audio during a performance, decide in advance which sources should be included in the recording. Yamaha and Mackie describe different loopback and USB routing options for their models; check what gets recorded for each model and mode.

What should you look for in a USB mixer?

Start with the recording you want to edit: one mixed voice calls for different features from several separate tracks. Then choose the connections and monitoring options that suit your microphone and recording setup.

Compact USB mixer for one voice

Choose this if: you use one microphone and want to make a straightforward computer recording.

Bear in mind: one microphone channel isn’t designed to capture multiple voices as separate tracks.

Analogue mixer for a live mix

Choose this if: you want to mix several sources using physical controls and a recording of the mix is enough.

Bear in mind: the number of analogue mixing channels doesn’t tell you how many separate tracks are recorded over USB.

Multitrack mixer or standalone recorder

Choose this if: you want to edit several voices or sources separately later, or record directly to an SD card.

Bear in mind: you may not need all the extra inputs and settings for a solo recording.

What to consider What should you check? Who is this important for?
Connecting and controlling one voice Check the type of microphone input, the power your microphone needs and how many microphones you want to connect at once. If you mainly record your own performance, you’ll want to connect your microphone properly and control its level. Around 36% of consumers say recording one voice is their top priority.
Editing sources separately later Check how many separate tracks are recorded and whether this is done via a computer, an SD card or both. If you want to adjust the levels of different voices or backing audio later, you’ll need separately recorded tracks. Around 29% of consumers list this as their top priority.
Monitoring while recording Check the headphone output, volume control and monitoring route; if there are several participants, check the number of outputs too. If you want to hear yourself through headphones while performing, check how monitoring works. Around 21% of consumers prioritise monitoring.
Adding backing audio live Check the inputs and the loopback or recording mode; also consider whether you want to save the added audio separately. If you want to mix music, effects or computer audio into your performance, check which sources will be included in the recording. Around 14% of consumers prioritise audio added live.

Common mistakes when buying a USB mixer

  • Assuming USB or eight mixing channels means eight separate recording tracks

    A mixer can combine several analogue sources while its USB interface sends fewer signals through separately. For example, Bax Music lists a 2x2 USB interface for the Soundcraft Notepad-8FX.

    Compare the number of separate USB or SD tracks you can record, not just the number of mixing channels.

    If you later find that you need separate tracks, you may need a different recorder or interface.

  • Using loopback without checking what gets recorded

    Loopback can mix audio from a connected device with your microphone. This can be useful for backing audio, but not if you only want to record the performance.

    Make a short test recording in the mode you’ve chosen and listen back to check that only the intended sources have been captured.

  • Focusing only on the highest sample rate

    According to Zoom, features including effects, EQ and the audio interface are unavailable on the LiveTrak L-8 in 96 kHz mode.

    Compare the features available at the same time in the recording mode you actually want to use.

Brands to compare for recording poetry

Yamaha

The AG03MK2 is designed for compact computer recording with one microphone.

  • Yamaha says the AG03MK2 has +48 V on its microphone input, a physical fader, loopback and two-track USB recording.
  • With one microphone channel and two-track USB recording, this model isn’t a multitrack recorder for recording several voices.

Mackie

The ProFX6v3 and ProFX6v3+ combine physical mixing controls with USB; make sure you check which version you’re looking at.

  • Mackie specifies direct monitoring for the ProFX6v3. For the ProFX6v3+, Mackie lists three USB recording modes and a 2-in/4-out USB-C interface.
  • The ProFX6v3+ features don’t automatically apply to the ProFX6v3.

Soundcraft

The Notepad-8FX combines analogue mixing controls with a USB interface for mixing several sources.

  • Soundcraft lists a headphone volume control and built-in effects for this model.
  • Bax Music specifies a 2x2 USB interface, so eight analogue mixing channels don’t mean eight separate USB recording tracks.

Tascam

The Mixcast 4 is designed for productions with multiple voices and separate recording or editing tracks.

  • Tascam specifies four microphone inputs, four headphone outputs, 14-track recording to an SD card and a 14-in/2-out USB interface.
  • For a recording with one voice, you may only use some of the available connections and features.

Zoom

The LiveTrak L-8 combines mixing with separate recording to an SD card and is designed for productions with multiple sources.

  • Zoom specifies separate SD card tracks and four headphone outputs.
  • According to Zoom, features including effects, EQ and the audio interface are unavailable when recording at 96 kHz.

USB mixers for recording poetry

Related products will be available soon.

Frequently asked questions about USB mixers for recording poetry

Do I always need a multitrack mixer for one voice?

No, not if you want to make a finished recording of one voice. Start by looking at the microphone connection, headphone monitoring and the USB routing you need. Separate tracks are mainly important if you want to edit several sources separately later.

When should I switch on phantom power?

Follow the requirements for your specific microphone and the mixer’s manual. For the AG03MK2, Yamaha says to switch on the +48V switch after connecting a condenser microphone; don’t switch on the power just because the mixer has this option.

How can I stop computer audio from accidentally ending up in my recording?

Test the USB or loopback mode you’ve chosen with a short recording before recording your performance. The Mackie ProFX6v3+ has modes for the full mix, loopback and direct channels, among others; loopback on the Yamaha AG03MK2 can add device audio to the output mix.

Who should I contact about a faulty mixer in the Netherlands?

Report a fault to the seller. According to the Dutch government, you’re entitled to a product that works as it should, and the Netherlands has no fixed statutory guarantee period; any manufacturer’s guarantee is in addition to this.

Can I publish a recording of someone else’s poem online?

Don’t assume that making a recording at home also gives you permission to publish it. The Dutch government distinguishes between making a copy for personal use and distributing or making a work available to the public. You’ll generally need the creator’s permission to use someone else’s protected poem. Also check the rights to any backing music.