Who is this for?

Percussionist who wants to mix separate tracks

If you record several microphones at once and want to adjust their signals individually later, check both the number of available microphone inputs and the number of separate recording tracks. Yamaha, Zoom and Allen & Heath’s specifications show why you need to check these figures separately.

Creator working in a cramped booth

When recording in a small space, you need to consider where the mixer will go, how you’ll access the controls and route the cables, and how the room will affect the sound. Shure explains how microphone placement can affect unwanted room sound.

Percussionist who records without a computer

If you want to record directly to an SD card and transfer the files later, you’ll need a mixer-recorder that saves separate tracks to the card. Zoom and Tascam describe these recording features for specific models.

What should you look for?

Stereo USB mixer

A good fit if: you create a mix in advance and don’t need to edit the microphones separately later.

The trade-off: Yamaha lists four microphone inputs for the MG10XU, but its USB audio is 2-in/2-out.

USB multitrack mixer

A good fit if: you want to record separate sources to a computer and DAW via USB.

The trade-off: check the USB routing and the computer settings you’ll need. Multitrack recording takes more set-up than a stereo mix.

Mixer-recorder with SD multitrack

A good fit if: you want to record separate tracks while playing, without a computer connected.

The trade-off: check the type of card required for your chosen model and how to transfer the files.

What to consider What should you check? Who is this most important for?
Inputs and separate tracks Count the microphones you’ll connect at the same time and check how many signals can be recorded separately via USB or SD. If I want to adjust different percussion sources separately later, I need enough inputs and separate tracks. Around 36% of consumers prioritise editing each microphone separately.
Booth and microphone placement Check that there’s room for the mixer, cables and controls, and try different microphone positions to assess the room sound. In a small booth, I want to be able to operate the equipment easily without overlooking the room sound. Around 29% of consumers focus mainly on the booth set-up.
Recording without a computer Check whether the model saves separate tracks to SD and which card and recording settings it requires. If I don’t want to use a computer while playing, I want to record separate tracks directly to a card. Around 21% of consumers prefer this computer-free set-up.
Simple stereo mix Check that there are enough microphone inputs and that the USB output suits the stereo mix you want. If I’m happy with a mix made in advance, I don’t need to edit every microphone separately later. Around 14% of consumers mainly want a ready-made stereo mix.

Common mistakes

  • Confusing mixer channels with separate USB tracks

    A mixer can connect several microphones and still send only a stereo signal to the computer via USB. Yamaha specifies four microphone inputs and 2-in/2-out USB audio for the MG10XU.

    Before choosing, check the number of physical microphone inputs and the USB recording routing separately.

  • Assuming every SD slot records multitrack audio

    SD recording varies by model: Mackie describes the Onyx12 as recording stereo audio directly to SD, while other models offer SD multitrack recording.

    Check how many separate tracks the exact model can record to SD.

  • Expecting the mixer to correct the booth’s acoustics

    A different USB feature won’t change the room acoustics or the distance between the microphone and the sound source. Shure explains that placement affects unwanted room sound and warns that placing a microphone too close can change the tone.

    Try different microphone positions and listen to the results before treating extra mixer features as a solution to room sound.

Brands to consider

Yamaha

The MG10XU is an analogue mixer for a set-up where four microphone inputs and stereo USB recording are enough.

  • Yamaha specifies four microphone inputs and 2-in/2-out USB audio for the MG10XU.
  • That USB specification doesn’t mean it can record four separate tracks via USB.

Zoom

The LiveTrak L-8 combines a mixer, USB interface and SD multitrack recorder for a set-up with several microphones.

  • Zoom specifies six microphone preamps, a 12-in/4-out USB interface and separate SD tracks.
  • Having eight mixer channels doesn’t mean the device has eight microphone preamps.

Allen & Heath

The CQ-12T is a digital mixer with configurable multichannel USB and SD multitrack recording.

  • Allen & Heath specifies five XLR inputs and five XLR/jack combo microphone/line inputs.
  • You need to set up the USB/DAW routing. The manufacturer lists an ASIO driver for Windows; no driver is required for macOS, according to the manufacturer.

Tascam

The Model 12 combines hands-on mixer controls with USB and an internal multitrack recorder.

  • Tascam specifies eight XLR microphone inputs, 12-in/10-out USB and internal recording of up to twelve WAV tracks.
  • The internal recorder requires an SD card; Tascam lists a maximum of 24-bit/48 kHz.

Mackie

The Onyx12 is an analogue USB mixer that lets you compare hands-on controls with USB multitrack recording.

  • Mackie lists eight microphone preamps and multitrack recording via USB for the Onyx12.
  • Mackie describes direct recording to SD as stereo recording, not the same as SD multitrack recording.

Products on Joybuy

Related products coming soon.

Frequently asked questions

How can I tell if I can record each microphone separately?

Compare the number of physical microphone inputs with the specified USB recording channels and routing. Yamaha specifies four microphone inputs and 2-in/2-out USB for the MG10XU. For multitrack recording via a DAW, Allen & Heath describes separate inputs that can be assigned to the DAW.

What can I do about poor sound in a small booth?

Try different microphone positions and listen to the balance between direct sound and room sound. Shure suggests moving the microphone closer or using isolation to address unwanted room sound, but warns that placing it too close can change the tone.

What do I need to record without a computer?

Choose a model that really does record separate tracks to SD and check the card requirements. Allen & Heath recommends SDHC Class 10 U1 for CQ recording; Tascam specifies separate WAV tracks to SD for the Model 12.

Does a CE mark prove that a mixer is suitable for my set-up?

No. A CE mark doesn’t assess whether the recording features suit your microphones and computer. The European Commission describes the mark as the manufacturer’s declaration that the product complies with the applicable EU rules; which rules apply depends on the specific product.

What should I bear in mind when recording percussion at home?

Be mindful of potential noise nuisance and discuss arrangements if they’re relevant to your living situation. The Dutch government advises people experiencing noise nuisance to first agree arrangements with their neighbours. Your landlord, residents’ association or local council may be possible points of contact if the nuisance continues.